Temel Yetimoglu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Temel Yetimoglu has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Erol Guler
George Mason University 3 Volgenau School of Engineering, Sid and Reva Dewberry Deptartment of Civil, Environmental & Infrastructure Engineering (CEIE), Krasnow Institute
3 shared publications - Elif Cicek
HACETTEPE ÜNİVERSİTES
2 shared publications - Elif Cicek
Atatürk University
1 shared publication
Latest Publications
- 1 March 2018
- Published by American Society of Civil Engineers (ASCE) in International Journal of Geomechanics
- Vol. 18 (3)
Stress Distribution below a Continuous Footing on Geotextile-Reinforced Soil
This study investigated the additional vertical stress (Δσ) change occurring under the centerline of a continuous footing on geotextile-reinforced soil. For different reinforcement parameters and conditions, load tests and finite-element model (FEM) analyses were performed. It was determined that the presence of reinforcements reduces the additional vertical stress values. There is a good correlation in some cases between experimental measurements and FEM results, but the values obtained are different from the values proposed based on theoretical considerations developed for uniform materials. Each additional reinforcement layer affects Δσ, and different parameters can affect the values of Δσ. It was determined that the reinforcements create a discontinuity in the triangular failure wedge under the footing, thereby affecting the additional stress developed.
- 1 March 2018
- Published by American Society of Civil Engineers (ASCE) in International Journal of Geomechanics
- Vol. 18 (3)
Stress Distribution below a Continuous Footing on Geotextile-Reinforced Soil
This study investigated the additional vertical stress (Δσ) change occurring under the centerline of a continuous footing on geotextile-reinforced soil. For different reinforcement parameters and conditions, load tests and finite-element model (FEM) analyses were performed. It was determined that the presence of reinforcements reduces the additional vertical stress values. There is a good correlation in some cases between experimental measurements and FEM results, but the values obtained are different from the values proposed based on theoretical considerations developed for uniform materials. Each additional reinforcement layer affects Δσ, and different parameters can affect the values of Δσ. It was determined that the reinforcements create a discontinuity in the triangular failure wedge under the footing, thereby affecting the additional stress developed.
- Open Access
- 19 August 2017
- Published by SCI AND TECH UNIVERSAL INC in Scientia Iranica
- Vol. 26 (1) , 167-177
Effects of the first reinforcement depth for different types of geosynthetics
In this study, the performance of the first reinforcement layer depth for sand subbase of a road or construction was investigated with plate load laboratory tests. Unreinforced and reinforced experiments for different reinforcement types were made by changing the first reinforcement layer depth ratio. One type of geotextile and two different geogrid specimens were used in the research. Load-settlement curves and Bearing Ratios were studied by measuring the results for different settlement ratios. Finally, laboratory measurements of unreinforced and reinforced soil using geotextile reinforcement were compared with Finite Element Model (FEM) analyses modeled under similar conditions. The results demonstrated the effects of different types of reinforcements for different first reinforcement layer locations. The number of reinforcement layers was another parameter which affected the bearing ratio along with the first reinforcement layer depths. It was also observed that the Bearing Ratio (BR) and load-settlement behavior changed significantly with the first reinforcement depth and settlements. Effects on failure modes for unreinforced and reinforced sand soils were compared for each test.
- 19 August 2017
- Published by SCI AND TECH UNIVERSAL INC in Scientia Iranica
- Vol. 26 (1) , 167-177
Open AccessEffects of the first reinforcement depth for different types of geosynthetics
In this study, the performance of the first reinforcement layer depth for sand subbase of a road or construction was investigated with plate load laboratory tests. Unreinforced and reinforced experiments for different reinforcement types were made by changing the first reinforcement layer depth ratio. One type of geotextile and two different geogrid specimens were used in the research. Load-settlement curves and Bearing Ratios were studied by measuring the results for different settlement ratios. Finally, laboratory measurements of unreinforced and reinforced soil using geotextile reinforcement were compared with Finite Element Model (FEM) analyses modeled under similar conditions. The results demonstrated the effects of different types of reinforcements for different first reinforcement layer locations. The number of reinforcement layers was another parameter which affected the bearing ratio along with the first reinforcement layer depths. It was also observed that the Bearing Ratio (BR) and load-settlement behavior changed significantly with the first reinforcement depth and settlements. Effects on failure modes for unreinforced and reinforced sand soils were compared for each test.
- 22 June 2015
- Published by Erzincan Universitesi Fen Bilimleri Ensitusu Dergisi in Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi
- Vol. 8 (1) , 100-114
SEDDE ŞEVLERİNİN GEOSENTETİK İLE DONATILANDIRILMASININ STABİLİTEYE ETKİLERİ
Bu çalışmada; yumuşak killer üzerine inşa edilecek dik eğimli geosentetik donatılı şev seddenin genel stabilitesi incelenmiştir. Sonlu elemanlar analizleri ile, donatı uzunluğu, donatı sayısı ve sürşarj yükü parametre olarak seçilerek etkileri araştırılmıştır. Kısa ve uzun süreli analizler tekrarlanarak farklı donatılı durumlardaki göçmeye karşı güvenlik sayıları hesaplanmıştır. Ayrıca şev eğiminin etkisinin de incelenmesi amacıyla işlemler iki farklı şev eğiminde tekrar edilmiştir. Şev donatısız durumda stabil duramamaktadır, fakat donatılı durumda güvenlik donatı konfigürasyonuna bağlı olarak yaklaşık 4 değerine kadar artış göstermiştir. Şev eğiminin azalması güvenliği %14-26 kadar arttırmıştır. Stabilite hesaplarında, donatı sayısı ve incelenen diğer parametrelere oranla donatının karşıdan karşıya uzatılmasının daha etkin bir parametre olduğu saptanmıştır.
- 22 June 2015
- Published by Erzincan Universitesi Fen Bilimleri Ensitusu Dergisi in Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi
- Vol. 8 (1) , 100-114
SEDDE ŞEVLERİNİN GEOSENTETİK İLE DONATILANDIRILMASININ STABİLİTEYE ETKİLERİ
Bu çalışmada; yumuşak killer üzerine inşa edilecek dik eğimli geosentetik donatılı şev seddenin genel stabilitesi incelenmiştir. Sonlu elemanlar analizleri ile, donatı uzunluğu, donatı sayısı ve sürşarj yükü parametre olarak seçilerek etkileri araştırılmıştır. Kısa ve uzun süreli analizler tekrarlanarak farklı donatılı durumlardaki göçmeye karşı güvenlik sayıları hesaplanmıştır. Ayrıca şev eğiminin etkisinin de incelenmesi amacıyla işlemler iki farklı şev eğiminde tekrar edilmiştir. Şev donatısız durumda stabil duramamaktadır, fakat donatılı durumda güvenlik donatı konfigürasyonuna bağlı olarak yaklaşık 4 değerine kadar artış göstermiştir. Şev eğiminin azalması güvenliği %14-26 kadar arttırmıştır. Stabilite hesaplarında, donatı sayısı ve incelenen diğer parametrelere oranla donatının karşıdan karşıya uzatılmasının daha etkin bir parametre olduğu saptanmıştır.