Samuel Rodrigues Bonamichi Do Couto
Research Subjects
Research Interests
Samuel Rodrigues Bonamichi Do Couto has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Aline Elesbão Do Nascimento
Nucleus of Research in Environmental Science and Biotechnology (NPCIAMB), Catholic University of Pernambuco, Recife, PE 50050-590, Brazil
1 shared publication Ariel de Souza Graça
1 shared publication- Carlos Alberto Alves da Silva
Nucleus of Research in Environmental Sciences and Biotechnology, Catholic University of Pernambuco, 50050-590 Recife, PE, Brazil
1 shared publication Charles dos Santos Estevam
1 shared publication- Cirlane Alves Araujo de Lima1 shared publication
- Eduardo de Magalhães Braga
Universidade federal do Pará
1 shared publication
Latest Publications
- Open Access
- 22 July 2024
- Published by IntechOpen
Use of Progesterone as a Strategy to Improve Reproductive Efficiency in Cattle
Progesterone (P4) is a key hormone in the reproductive physiology of cattle, playing a crucial role in regulating the estrous cycle and establishing and maintaining the pregnancy. In the context of reproductive efficiency, the use of P4 has been a strategy increasingly used on rural properties to anticipate puberty, increase pregnancy rates and reduce gestational loss. A common application is the administration of P4, often in the form of intravaginal devices or, more recently, with long-acting injectable progesterone. These methods help synchronize ovulation, allowing more precise management of reproductive programs, facilitating the use of artificial insemination, and contributing to genetic improvement. The synchronization of ovulation in beef and dairy cattle allows insemination at a pre-determined time without the need for estrus detection. These treatments increase the number of inseminated animals and, consequently, the number of pregnant animals. Overall, the strategic use of P4 in livestock management serves as a valuable tool for increasing reproductive efficiency, facilitating better control of reproductive cycles, and contributing to increased pregnancy rates and better overall reproductive performance in cattle herds.
- 22 July 2024
- Published by IntechOpen
Open AccessUse of Progesterone as a Strategy to Improve Reproductive Efficiency in Cattle
Progesterone (P4) is a key hormone in the reproductive physiology of cattle, playing a crucial role in regulating the estrous cycle and establishing and maintaining the pregnancy. In the context of reproductive efficiency, the use of P4 has been a strategy increasingly used on rural properties to anticipate puberty, increase pregnancy rates and reduce gestational loss. A common application is the administration of P4, often in the form of intravaginal devices or, more recently, with long-acting injectable progesterone. These methods help synchronize ovulation, allowing more precise management of reproductive programs, facilitating the use of artificial insemination, and contributing to genetic improvement. The synchronization of ovulation in beef and dairy cattle allows insemination at a pre-determined time without the need for estrus detection. These treatments increase the number of inseminated animals and, consequently, the number of pregnant animals. Overall, the strategic use of P4 in livestock management serves as a valuable tool for increasing reproductive efficiency, facilitating better control of reproductive cycles, and contributing to increased pregnancy rates and better overall reproductive performance in cattle herds.
- Open Access
- 6 April 2022
- Published by IntechOpen
Propionibacterium freudenreichii: General Characteristics and Probiotic Traits
Propionibacterium freudenreichii is a Gram-positive dairy probiotic bacterial species that has been used as a ripening starter in the production of Swiss-type cheese for a long time. It has been exploited for the optimization of cheese production, including ripening capacities and aroma compounds production, but also for the production of vitamin B12 and organic acids. Furthermore, it has emerged in the probiotics landscape owing to several beneficial traits, including tolerance to stress in the gastrointestinal tract, adhesion to host cells, anti-pathogenic activity, anticancer potential and immunomodulatory properties. These beneficial properties have been confirmed with in vitro and in vivo investigations, using several omics approaches that allowed the identification of important molecular actors, such as surface proteins, short-chain fatty acids and bifidogenic factors. The diversity within the species was shown to be an important aspect to take into consideration, since many of these properties were strain-dependent. New studies should dive further into the molecular mechanisms related to the beneficial properties of this species and of its products, while considering the complexities of strain diversity and the interactions with the host and its microbiota. This chapter reviews current knowledge on the possible impact of P. freudenreichii on human health.
- 6 April 2022
- Published by IntechOpen
Open AccessPropionibacterium freudenreichii: General Characteristics and Probiotic Traits
Propionibacterium freudenreichii is a Gram-positive dairy probiotic bacterial species that has been used as a ripening starter in the production of Swiss-type cheese for a long time. It has been exploited for the optimization of cheese production, including ripening capacities and aroma compounds production, but also for the production of vitamin B12 and organic acids. Furthermore, it has emerged in the probiotics landscape owing to several beneficial traits, including tolerance to stress in the gastrointestinal tract, adhesion to host cells, anti-pathogenic activity, anticancer potential and immunomodulatory properties. These beneficial properties have been confirmed with in vitro and in vivo investigations, using several omics approaches that allowed the identification of important molecular actors, such as surface proteins, short-chain fatty acids and bifidogenic factors. The diversity within the species was shown to be an important aspect to take into consideration, since many of these properties were strain-dependent. New studies should dive further into the molecular mechanisms related to the beneficial properties of this species and of its products, while considering the complexities of strain diversity and the interactions with the host and its microbiota. This chapter reviews current knowledge on the possible impact of P. freudenreichii on human health.
- Open Access
- 26 December 2021
- Published by IntechOpen
Gastroprotective Mechanisms
Gastric ulcer (GU), a common type of peptic ulcer, results from an imbalance in the action of protective and aggressive agents. Gastroprotective mechanisms are mucus layer, gastric epithelium, gastric blood flow, gastric neurons, mucosal repair capacity, and immune system. Thus, the aim of this chapter was to provide an update on gastroprotective mechanisms. It was carried out through searches in PubMed covering the years 2016–2021 using several keywords. This survey resulted in 428 articles, of which 110 were cited in this chapter. It was reviewed the status of gastroprotective mechanisms and highlighted that mucins can act as a filter; gastric epithelial defenses are composed of the cell barrier, stem cells, and sensors on the mucosal surface; nitric oxide (NO) and hydrogen sulfide (H2S) act for gastric blood flow homeostasis (GBF); the main effector neurons in the gastric mucosa are cholinergic, nitrergic and VIPergic, and oxytocin can activate neurons; repair of the gastric mucosa requires complex biological responses; the immune system regulates the entry of antigens and pathogens. The main knowledge about gastroprotective mechanisms remains unchanged. However, we conclude that there has been progressing in this area.
- 26 December 2021
- Published by IntechOpen
Open AccessGastroprotective Mechanisms
Gastric ulcer (GU), a common type of peptic ulcer, results from an imbalance in the action of protective and aggressive agents. Gastroprotective mechanisms are mucus layer, gastric epithelium, gastric blood flow, gastric neurons, mucosal repair capacity, and immune system. Thus, the aim of this chapter was to provide an update on gastroprotective mechanisms. It was carried out through searches in PubMed covering the years 2016–2021 using several keywords. This survey resulted in 428 articles, of which 110 were cited in this chapter. It was reviewed the status of gastroprotective mechanisms and highlighted that mucins can act as a filter; gastric epithelial defenses are composed of the cell barrier, stem cells, and sensors on the mucosal surface; nitric oxide (NO) and hydrogen sulfide (H2S) act for gastric blood flow homeostasis (GBF); the main effector neurons in the gastric mucosa are cholinergic, nitrergic and VIPergic, and oxytocin can activate neurons; repair of the gastric mucosa requires complex biological responses; the immune system regulates the entry of antigens and pathogens. The main knowledge about gastroprotective mechanisms remains unchanged. However, we conclude that there has been progressing in this area.
- Open Access
- 13 April 2021
- Published by IntechOpen
Double Pole Method in QCD Sum Rules for Vector Mesons
The QCD Sum Rules approach had proposed by Shifman, Vaishtein Zakharov Novikov, Okun and Voloshin (SVZNOV) in 1979 and has been used as a method for extracting useful properties of hadrons having the lowest mass, called as ground states. On the other hand, the most recent experimental results make it clear that the study of the excited states can help to solve many puzzles about the new XYZ mesons structure. In this paper, we propose a new method to study the first excited state of the vector mesons, in particular we focus our attention on the study of the ρ vector mesons, that have been studied previously by SVZNOV method. In principle, the method that we used is a simple modification to the shape of the spectral density of the SVZNOV method, which is written as “pole + continuum”, to a new functional form “pole + pole + continuum”. In this way, We may obtain the ρ and the ρ 2 S masses and also their decay constants.
- 13 April 2021
- Published by IntechOpen
Open AccessDouble Pole Method in QCD Sum Rules for Vector Mesons
The QCD Sum Rules approach had proposed by Shifman, Vaishtein Zakharov Novikov, Okun and Voloshin (SVZNOV) in 1979 and has been used as a method for extracting useful properties of hadrons having the lowest mass, called as ground states. On the other hand, the most recent experimental results make it clear that the study of the excited states can help to solve many puzzles about the new XYZ mesons structure. In this paper, we propose a new method to study the first excited state of the vector mesons, in particular we focus our attention on the study of the ρ vector mesons, that have been studied previously by SVZNOV method. In principle, the method that we used is a simple modification to the shape of the spectral density of the SVZNOV method, which is written as “pole + continuum”, to a new functional form “pole + pole + continuum”. In this way, We may obtain the ρ and the ρ 2 S masses and also their decay constants.
- Open Access
- 14 January 2021
- Published by IntechOpen
Welding Residual Stresses to the Electric Arc
Arc welding processes are widely used in the industrial sector, mainly for productivity and continuity. However, these processes have several undesirable results, such as distortions and residual stresses (RS). When compared to other welding processes, the RS level can make the welded joint unfeasible. Many studies on these arc welding discontinuities have been carried out in experimental and numerical areas about their measurement, analysis, and control, however, not yet clearly enlightened, since it is a complex topic, both for industry and academia, needing to be deepened. This study aims to present a contextualized approach to destructive and non-destructive techniques used to measure RS generated by arc welding, as well as the influence of these distortions and stresses on the welded structures and, finally, to present possible control techniques. Finally, this study highlights the use of CW-GMAW welding, which achieved a reduction in stress and distortion levels, due to the introduction of a non-energized wire in the arc of the GMAW process, as evidenced by the results of RS measured by X-ray diffraction (XRD) and acoustic birefringence (AB). Thus, in this context, the approach to RS in arc welding presented here is extremely relevant for researchers involved with the topic.
- 14 January 2021
- Published by IntechOpen
Open AccessWelding Residual Stresses to the Electric Arc
Arc welding processes are widely used in the industrial sector, mainly for productivity and continuity. However, these processes have several undesirable results, such as distortions and residual stresses (RS). When compared to other welding processes, the RS level can make the welded joint unfeasible. Many studies on these arc welding discontinuities have been carried out in experimental and numerical areas about their measurement, analysis, and control, however, not yet clearly enlightened, since it is a complex topic, both for industry and academia, needing to be deepened. This study aims to present a contextualized approach to destructive and non-destructive techniques used to measure RS generated by arc welding, as well as the influence of these distortions and stresses on the welded structures and, finally, to present possible control techniques. Finally, this study highlights the use of CW-GMAW welding, which achieved a reduction in stress and distortion levels, due to the introduction of a non-energized wire in the arc of the GMAW process, as evidenced by the results of RS measured by X-ray diffraction (XRD) and acoustic birefringence (AB). Thus, in this context, the approach to RS in arc welding presented here is extremely relevant for researchers involved with the topic.
- Open Access
- 7 February 2018
- Published by IntechOpen
Reduction in the Sulfur Content of Fossil Fuels by Cunninghamella elegans (UCP 0596) to Dibenzothiophene Compound
Biodesulfurization (BDS) is one of the most promising technologies used together with traditional hydrodesulfurization (HDS) to reduce the sulfur content of fossil fuels. In this research study, a strain of Cunninghamella elegans (UCP 596) was isolated from mangrove sediments to metabolize an organosulfur dibenzothiophene (DBT) compound in the concentrations of 0.5 and 1 mM and transform to DBT sulfone (DBT-5-dioxide), followed by dibenzothiophene 5,5-dioxide and 2-hydroxybiphenyl metabolites, thus suggesting the use of the “4S” metabolic pathway. The fungus also degraded the DBT completely in the first 24 h of growth on a 2.0 mM DBT concentration by angular deoxygenation, which suggests that a new second metabolic pathway was used. The DBT was consumed as the carbon source, and the sulfur was removed in the form of sulfite ion. A new product, benzoic acid, was formed at the end of the catabolism of DBT by C. elegans using an angular route.
- 7 February 2018
- Published by IntechOpen
Open AccessReduction in the Sulfur Content of Fossil Fuels by Cunninghamella elegans (UCP 0596) to Dibenzothiophene Compound
Biodesulfurization (BDS) is one of the most promising technologies used together with traditional hydrodesulfurization (HDS) to reduce the sulfur content of fossil fuels. In this research study, a strain of Cunninghamella elegans (UCP 596) was isolated from mangrove sediments to metabolize an organosulfur dibenzothiophene (DBT) compound in the concentrations of 0.5 and 1 mM and transform to DBT sulfone (DBT-5-dioxide), followed by dibenzothiophene 5,5-dioxide and 2-hydroxybiphenyl metabolites, thus suggesting the use of the “4S” metabolic pathway. The fungus also degraded the DBT completely in the first 24 h of growth on a 2.0 mM DBT concentration by angular deoxygenation, which suggests that a new second metabolic pathway was used. The DBT was consumed as the carbon source, and the sulfur was removed in the form of sulfite ion. A new product, benzoic acid, was formed at the end of the catabolism of DBT by C. elegans using an angular route.