Taeyeong Yoon
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Taeyeong Yoon has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Jungsuek Oh
Seoul National University
14 shared publications - Uichan Park
Seoul National University
8 shared publications - Sangwook Nam
Institute of New Media Communication (INMC), School of Electrical and Computer Engineering, Seoul National University, Seoul, South Korea
5 shared publications - Young-Seok Lee
Institute of New Media and Communications (INMC), Seoul National University
5 shared publications - Minje Kim
Institute of New Media and Communications (INMC), Seoul National University
4 shared publications - Sanghun Lee
Institute of New Media and Communications (INMC), Seoul National University
3 shared publications
Latest Publications
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (11) , 10083-10100
Hardware-Aware MILP for Optimal End-to-End Efficiency in MISO WPT: Joint Optimization of Power Modes and Fault Tolerance
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (11) , 10083-10100
Hardware-Aware MILP for Optimal End-to-End Efficiency in MISO WPT: Joint Optimization of Power Modes and Fault Tolerance
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (9) , 8545-8562
An End-to-End DC-to-DC Efficiency Optimization and Design Analysis for MIMO Wireless Power Transfer Systems
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (9) , 8545-8562
An End-to-End DC-to-DC Efficiency Optimization and Design Analysis for MIMO Wireless Power Transfer Systems
- 6 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 36 (6) , 882-885
An Ultracompact Active Bidirectional Phase Shifter With an Intrinsic Reciprocal Phase-Inverting Core
This letter presents an ultracompact active bidirectional phase shifter (ABPS), featuring an intrinsic reciprocal phase-inverting bidirectional variable-gain amplifier (PI-BVGA) core. To achieve a compact footprint and high-reliability bidirectional operation, we propose a novel core architecture that intrinsically synchronizes input and output admittances without bulky switching networks. In the proposed PI-BVGA, the transistors in the inactive path are not merely turned off; one is utilized as an input conductance controller via DC bias adjustment, while the other remains fully on to function as an output susceptance equalizer. This technique effectively cancels the parasitic variations, enabling precise matching between forward and backward operations within a significantly reduced area. The proposed ABPS achieves 6-bit phase resolution, exhibiting a root-mean-square (rms) phase error of less than 2.1°, an rms gain error of less than 0.7 dB, and a net average insertion loss of 1.5 dB in both directions, occupying an ultracompact area of $0.57\times 0.3$ mm.
- 6 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 36 (6) , 882-885
An Ultracompact Active Bidirectional Phase Shifter With an Intrinsic Reciprocal Phase-Inverting Core
This letter presents an ultracompact active bidirectional phase shifter (ABPS), featuring an intrinsic reciprocal phase-inverting bidirectional variable-gain amplifier (PI-BVGA) core. To achieve a compact footprint and high-reliability bidirectional operation, we propose a novel core architecture that intrinsically synchronizes input and output admittances without bulky switching networks. In the proposed PI-BVGA, the transistors in the inactive path are not merely turned off; one is utilized as an input conductance controller via DC bias adjustment, while the other remains fully on to function as an output susceptance equalizer. This technique effectively cancels the parasitic variations, enabling precise matching between forward and backward operations within a significantly reduced area. The proposed ABPS achieves 6-bit phase resolution, exhibiting a root-mean-square (rms) phase error of less than 2.1°, an rms gain error of less than 0.7 dB, and a net average insertion loss of 1.5 dB in both directions, occupying an ultracompact area of $0.57\times 0.3$ mm.
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- p. 1
Equivalent-Circuit-Assisted Design of a Screen-Printed Wideband Metasurface Absorber
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- p. 1
Open AccessEquivalent-Circuit-Assisted Design of a Screen-Printed Wideband Metasurface Absorber
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Multiscale and Multiphysics Computational Techniques
- Vol. 11, 515-526
MR2P: Diffusion Model-Driven Pixelated-Antenna Inverse Design Framework Generalizable Across Extensible Electromagnetic Figures of Merit
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Multiscale and Multiphysics Computational Techniques
- Vol. 11, 515-526
MR2P: Diffusion Model-Driven Pixelated-Antenna Inverse Design Framework Generalizable Across Extensible Electromagnetic Figures of Merit
- 11 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 35 (12) , 2109-2112
A Compact Active Bidirectional Phase Shifter Employing a Highly Isolated Single Gilbert Cell
This letter presents a compact and highly accurate active bidirectional phase shifter (ABPS) with reduced root-mean-square (rms) errors in 28-nm CMOS. The proposed ABPS integrates a transformer-based hybrid coupler (THC) for I/Q signal generation and combining, a bidirectional amplification core, and a Marchand balun-based rat-race coupler (MRRC) for precise signal subtraction and division. A three-stack single Gilbert cell (GC) architecture, arranged in an anti-parallel configuration, enables both amplitude scaling and 180° phase inversion within a compact footprint. An optimized novel electromagnetic (EM) structure is implemented to achieve high port-to-port isolation, ensuring precise phase and magnitude control. The proposed ABPS supports a 6-bit phase shift operation across a full 360° range and demonstrates rms gain and phase errors of 0.36 dB and 2.1°, respectively, in both forward and backward directions. The proposed ABPS was fabricated in a compact area of $1.08\times 0.42$ mm2, consuming 16.2 mW.
- 11 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 35 (12) , 2109-2112
A Compact Active Bidirectional Phase Shifter Employing a Highly Isolated Single Gilbert Cell
This letter presents a compact and highly accurate active bidirectional phase shifter (ABPS) with reduced root-mean-square (rms) errors in 28-nm CMOS. The proposed ABPS integrates a transformer-based hybrid coupler (THC) for I/Q signal generation and combining, a bidirectional amplification core, and a Marchand balun-based rat-race coupler (MRRC) for precise signal subtraction and division. A three-stack single Gilbert cell (GC) architecture, arranged in an anti-parallel configuration, enables both amplitude scaling and 180° phase inversion within a compact footprint. An optimized novel electromagnetic (EM) structure is implemented to achieve high port-to-port isolation, ensuring precise phase and magnitude control. The proposed ABPS supports a 6-bit phase shift operation across a full 360° range and demonstrates rms gain and phase errors of 0.36 dB and 2.1°, respectively, in both forward and backward directions. The proposed ABPS was fabricated in a compact area of $1.08\times 0.42$ mm2, consuming 16.2 mW.
- Open Access
- 24 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- Vol. 6 (6) , 1696-1707
A Topology-Based Array Compensation Empowered by Equivalent Current Modeling of TM ₁₀ Patch Antennas for Cross-Polarization Reduction
This paper introduces a comprehensive analysis of cross-polarization effects originating from current imbalances in patch antennas and array configurations. A simplified yet broadly applicable mitigation strategy is proposed, offering a generalized approach to improve cross-polarization performance for antenna arrays operating in the $TM_{10}$ mode. In contrast to earlier works that predominantly employed heuristic array rotation techniques, the present work adopts a systematic modeling approach to elucidate and regulate cross-polarization across a wide range of array scales and topologies. By utilizing electric current modeling at both the single-element and array levels, and analyzing radiation behavior in multiple planes, the beam pattern characteristics are thoroughly examined. Several optimized array configurations, specifically targeting cross-polarization suppression, are proposed. The proposed array system incorporates a series-type power divider, validated through both simulation and measurement, demonstrating significant suppression of cross-polarization over all scan angles. Notably, the fabricated series power divider achieves amplitude and phase mismatches of less than 3 dB and 10 degrees, respectively, across 16 output branches. The analytical and empirical results outlined in this work establish a conceptual design methodology that achieves substantial cross-polarization reduction without altering individual element geometries. Most significantly, a cross-polarization discrimination (XPD) level of –40 dB is attained in beamforming scenarios. These findings confirm that enhanced cross-polarization performance can be systematically realized by refining array sequencing and periodicity.
- 24 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- Vol. 6 (6) , 1696-1707
Open AccessA Topology-Based Array Compensation Empowered by Equivalent Current Modeling of TM ₁₀ Patch Antennas for Cross-Polarization Reduction
This paper introduces a comprehensive analysis of cross-polarization effects originating from current imbalances in patch antennas and array configurations. A simplified yet broadly applicable mitigation strategy is proposed, offering a generalized approach to improve cross-polarization performance for antenna arrays operating in the $TM_{10}$ mode. In contrast to earlier works that predominantly employed heuristic array rotation techniques, the present work adopts a systematic modeling approach to elucidate and regulate cross-polarization across a wide range of array scales and topologies. By utilizing electric current modeling at both the single-element and array levels, and analyzing radiation behavior in multiple planes, the beam pattern characteristics are thoroughly examined. Several optimized array configurations, specifically targeting cross-polarization suppression, are proposed. The proposed array system incorporates a series-type power divider, validated through both simulation and measurement, demonstrating significant suppression of cross-polarization over all scan angles. Notably, the fabricated series power divider achieves amplitude and phase mismatches of less than 3 dB and 10 degrees, respectively, across 16 output branches. The analytical and empirical results outlined in this work establish a conceptual design methodology that achieves substantial cross-polarization reduction without altering individual element geometries. Most significantly, a cross-polarization discrimination (XPD) level of –40 dB is attained in beamforming scenarios. These findings confirm that enhanced cross-polarization performance can be systematically realized by refining array sequencing and periodicity.
- 9 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 24 (11) , 4492-4496
Transmission-Conversion Efficiency Maximization Technique for MIMO Wireless Power Transfer Systems in ISAC Applications
This paper presents a DC power optimization methodology for MIMO Wireless Power Transfer (WPT) systems especially for Integrated Sensing and Communications (ISAC) applications. Given a rectifier that has already been optimized itself, the Transmission–Conversion Efficiency (TCE) is optimized by jointly considering both RF–RF (air propagation) and RF–DC (rectifier) stages. In a specific MIMO WPT configuration with a 16×16 transmitter array (TXA) and an 8×8 receiver array (RXA), simulation result showed a significant 65.6% TCE improvement over conventional RF-to-RF Power Transfer Efficiency (PTE) optimization. It can offer a boundary for future real-time WPT algorithms.
- 9 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 24 (11) , 4492-4496
Transmission-Conversion Efficiency Maximization Technique for MIMO Wireless Power Transfer Systems in ISAC Applications
This paper presents a DC power optimization methodology for MIMO Wireless Power Transfer (WPT) systems especially for Integrated Sensing and Communications (ISAC) applications. Given a rectifier that has already been optimized itself, the Transmission–Conversion Efficiency (TCE) is optimized by jointly considering both RF–RF (air propagation) and RF–DC (rectifier) stages. In a specific MIMO WPT configuration with a 16×16 transmitter array (TXA) and an 8×8 receiver array (RXA), simulation result showed a significant 65.6% TCE improvement over conventional RF-to-RF Power Transfer Efficiency (PTE) optimization. It can offer a boundary for future real-time WPT algorithms.
- 12 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 73 (6) , 3346-3358
A Design and Characterization Method of a Scalable Large Transmitting Array for Wireless Power Transfer
This article presents a novel method for designing, characterizing, and calibrating a scalable transmitter with a large number of antenna elements, and for calculating the precise beam collection efficiency (BCE) in radio frequency wireless power transfer (WPT) systems. Rather than simply applying conventional calibration methods from radar systems to WPT systems, this article proposes an efficient calibration technique that reduces calibration time while accurately estimating BCE. The proposed method uses only a single connection at the transmitter array (TXA) input and a fixed reference antenna for WPT calibration, maintaining a simple experimental setup. This approach significantly reduces the time required for calibration and minimizes the space needed. Furthermore, to efficiently distribute RF signals in large array systems while minimizing space requirements, we present a loss compensated series power divider (LCSPD). Our approach is validated using an experimental prototype operating at 5.64 GHz, comprising a 256-element TXA and a 35-element receiver array (RXA). The calibration method’s effectiveness is demonstrated through wireless power transmission experiments employing convex optimized (CVX) patterns at the transmitter. Comparative analysis of simulated and measured received power, using root-mean-squared error (RMSE) and normalized RMSE (NRMSE), shows a high correlation in RXA patterns. In a 0.5-m transmission scenario, we achieved a transmitted power of 6.08 W, received power of 4.37 W, and a BCE of 71.9%, underscoring the potential of near-field focusing in WPT systems and the accuracy of our proposed method.
- 12 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 73 (6) , 3346-3358
A Design and Characterization Method of a Scalable Large Transmitting Array for Wireless Power Transfer
This article presents a novel method for designing, characterizing, and calibrating a scalable transmitter with a large number of antenna elements, and for calculating the precise beam collection efficiency (BCE) in radio frequency wireless power transfer (WPT) systems. Rather than simply applying conventional calibration methods from radar systems to WPT systems, this article proposes an efficient calibration technique that reduces calibration time while accurately estimating BCE. The proposed method uses only a single connection at the transmitter array (TXA) input and a fixed reference antenna for WPT calibration, maintaining a simple experimental setup. This approach significantly reduces the time required for calibration and minimizes the space needed. Furthermore, to efficiently distribute RF signals in large array systems while minimizing space requirements, we present a loss compensated series power divider (LCSPD). Our approach is validated using an experimental prototype operating at 5.64 GHz, comprising a 256-element TXA and a 35-element receiver array (RXA). The calibration method’s effectiveness is demonstrated through wireless power transmission experiments employing convex optimized (CVX) patterns at the transmitter. Comparative analysis of simulated and measured received power, using root-mean-squared error (RMSE) and normalized RMSE (NRMSE), shows a high correlation in RXA patterns. In a 0.5-m transmission scenario, we achieved a transmitted power of 6.08 W, received power of 4.37 W, and a BCE of 71.9%, underscoring the potential of near-field focusing in WPT systems and the accuracy of our proposed method.
- 22 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (12) , 9208-9220
A Low-Profile High-Efficiency Transmitarray Antenna Reflecting Effective Phase Discontinuity With TE/TM Superimpose Analysis
In this study, we propose a high-efficiency, low-profile transmitarray (TA) antenna system and present an efficient design procedure by co-designing a multi-port sub-array antenna to perform as a feed source and the TA simultaneously. The proposed TA antenna supports dual slant polarization (SP). Furthermore, the concept of effective phase discontinuity (EPD) based on a mutual coupling coefficient is introduced for efficient TA design operation at short focal lengths to verify the effectiveness of the advanced unit cell (UC) arrangement with gain enhancement. A TE/TM superimposing method was applied to derive the UC response over the entire area of the aperture of the TA based on the response analysis of a rotated UC satisfying 90° rotational symmetry to TE/TM oblique incidence. The designed TA antenna exhibits a low profile of F/D ratio = 0.33 at a center frequency of 3.5 GHz and a high aperture efficiency of 37%. The measured results are also in good agreement with the simulation results, indicating that the proposed TA antenna system provides an effective design methodology for SP array antennas and low-profile high-gain systems.
- 22 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (12) , 9208-9220
A Low-Profile High-Efficiency Transmitarray Antenna Reflecting Effective Phase Discontinuity With TE/TM Superimpose Analysis
In this study, we propose a high-efficiency, low-profile transmitarray (TA) antenna system and present an efficient design procedure by co-designing a multi-port sub-array antenna to perform as a feed source and the TA simultaneously. The proposed TA antenna supports dual slant polarization (SP). Furthermore, the concept of effective phase discontinuity (EPD) based on a mutual coupling coefficient is introduced for efficient TA design operation at short focal lengths to verify the effectiveness of the advanced unit cell (UC) arrangement with gain enhancement. A TE/TM superimposing method was applied to derive the UC response over the entire area of the aperture of the TA based on the response analysis of a rotated UC satisfying 90° rotational symmetry to TE/TM oblique incidence. The designed TA antenna exhibits a low profile of F/D ratio = 0.33 at a center frequency of 3.5 GHz and a high aperture efficiency of 37%. The measured results are also in good agreement with the simulation results, indicating that the proposed TA antenna system provides an effective design methodology for SP array antennas and low-profile high-gain systems.