Minje Kim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Minje Kim has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Jungsuek Oh
Seoul National University
5 shared publications - Taeyeong Yoon
Seoul National University
4 shared publications - Sanghun Lee
Institute of New Media and Communications (INMC), Seoul National University
3 shared publications - Sangwook Nam
Institute of New Media Communication (INMC), School of Electrical and Computer Engineering, Seoul National University, Seoul, South Korea
3 shared publications - Young-Seok Lee
Institute of New Media and Communications (INMC), Seoul National University
3 shared publications - Uichan Park
Seoul National University
2 shared publications
Latest Publications
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (11) , 10083-10100
Hardware-Aware MILP for Optimal End-to-End Efficiency in MISO WPT: Joint Optimization of Power Modes and Fault Tolerance
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (11) , 10083-10100
Hardware-Aware MILP for Optimal End-to-End Efficiency in MISO WPT: Joint Optimization of Power Modes and Fault Tolerance
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 163784-163797
Data-Efficient Physics-Informed Reflection Prediction of Metasurface Absorbers via a GSTC-Embedded Branch–Trunk Neural Operator
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 163784-163797
Open AccessData-Efficient Physics-Informed Reflection Prediction of Metasurface Absorbers via a GSTC-Embedded Branch–Trunk Neural Operator
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Multiscale and Multiphysics Computational Techniques
- Vol. 11, 515-526
MR2P: Diffusion Model-Driven Pixelated-Antenna Inverse Design Framework Generalizable Across Extensible Electromagnetic Figures of Merit
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Multiscale and Multiphysics Computational Techniques
- Vol. 11, 515-526
MR2P: Diffusion Model-Driven Pixelated-Antenna Inverse Design Framework Generalizable Across Extensible Electromagnetic Figures of Merit
- Open Access
- 24 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- Vol. 6 (6) , 1696-1707
A Topology-Based Array Compensation Empowered by Equivalent Current Modeling of TM ₁₀ Patch Antennas for Cross-Polarization Reduction
This paper introduces a comprehensive analysis of cross-polarization effects originating from current imbalances in patch antennas and array configurations. A simplified yet broadly applicable mitigation strategy is proposed, offering a generalized approach to improve cross-polarization performance for antenna arrays operating in the $TM_{10}$ mode. In contrast to earlier works that predominantly employed heuristic array rotation techniques, the present work adopts a systematic modeling approach to elucidate and regulate cross-polarization across a wide range of array scales and topologies. By utilizing electric current modeling at both the single-element and array levels, and analyzing radiation behavior in multiple planes, the beam pattern characteristics are thoroughly examined. Several optimized array configurations, specifically targeting cross-polarization suppression, are proposed. The proposed array system incorporates a series-type power divider, validated through both simulation and measurement, demonstrating significant suppression of cross-polarization over all scan angles. Notably, the fabricated series power divider achieves amplitude and phase mismatches of less than 3 dB and 10 degrees, respectively, across 16 output branches. The analytical and empirical results outlined in this work establish a conceptual design methodology that achieves substantial cross-polarization reduction without altering individual element geometries. Most significantly, a cross-polarization discrimination (XPD) level of –40 dB is attained in beamforming scenarios. These findings confirm that enhanced cross-polarization performance can be systematically realized by refining array sequencing and periodicity.
- 24 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- Vol. 6 (6) , 1696-1707
Open AccessA Topology-Based Array Compensation Empowered by Equivalent Current Modeling of TM ₁₀ Patch Antennas for Cross-Polarization Reduction
This paper introduces a comprehensive analysis of cross-polarization effects originating from current imbalances in patch antennas and array configurations. A simplified yet broadly applicable mitigation strategy is proposed, offering a generalized approach to improve cross-polarization performance for antenna arrays operating in the $TM_{10}$ mode. In contrast to earlier works that predominantly employed heuristic array rotation techniques, the present work adopts a systematic modeling approach to elucidate and regulate cross-polarization across a wide range of array scales and topologies. By utilizing electric current modeling at both the single-element and array levels, and analyzing radiation behavior in multiple planes, the beam pattern characteristics are thoroughly examined. Several optimized array configurations, specifically targeting cross-polarization suppression, are proposed. The proposed array system incorporates a series-type power divider, validated through both simulation and measurement, demonstrating significant suppression of cross-polarization over all scan angles. Notably, the fabricated series power divider achieves amplitude and phase mismatches of less than 3 dB and 10 degrees, respectively, across 16 output branches. The analytical and empirical results outlined in this work establish a conceptual design methodology that achieves substantial cross-polarization reduction without altering individual element geometries. Most significantly, a cross-polarization discrimination (XPD) level of –40 dB is attained in beamforming scenarios. These findings confirm that enhanced cross-polarization performance can be systematically realized by refining array sequencing and periodicity.
- 12 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 73 (6) , 3346-3358
A Design and Characterization Method of a Scalable Large Transmitting Array for Wireless Power Transfer
This article presents a novel method for designing, characterizing, and calibrating a scalable transmitter with a large number of antenna elements, and for calculating the precise beam collection efficiency (BCE) in radio frequency wireless power transfer (WPT) systems. Rather than simply applying conventional calibration methods from radar systems to WPT systems, this article proposes an efficient calibration technique that reduces calibration time while accurately estimating BCE. The proposed method uses only a single connection at the transmitter array (TXA) input and a fixed reference antenna for WPT calibration, maintaining a simple experimental setup. This approach significantly reduces the time required for calibration and minimizes the space needed. Furthermore, to efficiently distribute RF signals in large array systems while minimizing space requirements, we present a loss compensated series power divider (LCSPD). Our approach is validated using an experimental prototype operating at 5.64 GHz, comprising a 256-element TXA and a 35-element receiver array (RXA). The calibration method’s effectiveness is demonstrated through wireless power transmission experiments employing convex optimized (CVX) patterns at the transmitter. Comparative analysis of simulated and measured received power, using root-mean-squared error (RMSE) and normalized RMSE (NRMSE), shows a high correlation in RXA patterns. In a 0.5-m transmission scenario, we achieved a transmitted power of 6.08 W, received power of 4.37 W, and a BCE of 71.9%, underscoring the potential of near-field focusing in WPT systems and the accuracy of our proposed method.
- 12 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 73 (6) , 3346-3358
A Design and Characterization Method of a Scalable Large Transmitting Array for Wireless Power Transfer
This article presents a novel method for designing, characterizing, and calibrating a scalable transmitter with a large number of antenna elements, and for calculating the precise beam collection efficiency (BCE) in radio frequency wireless power transfer (WPT) systems. Rather than simply applying conventional calibration methods from radar systems to WPT systems, this article proposes an efficient calibration technique that reduces calibration time while accurately estimating BCE. The proposed method uses only a single connection at the transmitter array (TXA) input and a fixed reference antenna for WPT calibration, maintaining a simple experimental setup. This approach significantly reduces the time required for calibration and minimizes the space needed. Furthermore, to efficiently distribute RF signals in large array systems while minimizing space requirements, we present a loss compensated series power divider (LCSPD). Our approach is validated using an experimental prototype operating at 5.64 GHz, comprising a 256-element TXA and a 35-element receiver array (RXA). The calibration method’s effectiveness is demonstrated through wireless power transmission experiments employing convex optimized (CVX) patterns at the transmitter. Comparative analysis of simulated and measured received power, using root-mean-squared error (RMSE) and normalized RMSE (NRMSE), shows a high correlation in RXA patterns. In a 0.5-m transmission scenario, we achieved a transmitted power of 6.08 W, received power of 4.37 W, and a BCE of 71.9%, underscoring the potential of near-field focusing in WPT systems and the accuracy of our proposed method.