Stijn Poelman
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Stijn Poelman has a total of 54 co-authors. Here are the top co-authors by number of shared publications:
- Maximilien Billet
Ghent University - IMEC
5 shared publications - Bart Kuyken
Photonics Research Group INTEC Ghent University -imec 9052 Ghent Belgium
4 shared publications - Tom Reep
Photonics Research Group, Department of Information Technology Ghent University ‐ imec, Ghent East Flanders Belgium
4 shared publications Bart Kuyken
3 shared publications- Dongbo Wang
Photonics Research Group, Department of Information Technology Ghent University ‐ imec, Ghent East Flanders Belgium
3 shared publications - Gunther Roelkens
Photonics Research Group, Department of Information Technology, Ghent University imec, Ghent, Belgium
3 shared publications
Latest Publications
- Open Access
- 1 October 2026
- Published by Wiley in Laser & Photonics Reviews
Heterogeneous Integration of Multi‐Band Mode‐Locked and Single‐Mode Lasers on an Extended Commercial SiN Platform
Integrated silicon nitride (SiN) waveguides offer ultra‐low propagation loss across a broad transparency window, enabling large‐scale photonic integrated circuits (PICs) for applications from LiDAR to quantum photonics. However, integrating lasers on SiN PICs remains challenging due to the large refractive‐index contrast between SiN and high‐index III–V gain materials. We address this by extending Ligentec's commercial bi‐layer SiN platform with a polycrystalline silicon (Poly‐Si) layer and demonstrate heterogeneous integration of GaAs‐ and InP‐based amplifiers via a scalable process called micro‐transfer printing. Multi‐section adiabatic tapers ensure efficient coupling from the SiN to Poly‐Si layer and onward to the printed III–V devices. In a single fabrication run, we realize a diverse set of lasers, including the first O‐band GaAs‐on‐SiN mode‐locked laser (5.1 GHz repetition rate, 5.4 ps pulse width), a C‐band mode‐locked laser delivering >1 mW optical power per output, and multiple single‐mode sources (ring‐filter and distributed Bragg reflector cavities) with side‐mode suppression ratio up to 51 dB and intrinsic linewidth down to 1 kHz. These results demonstrate how combining micro‐transfer printing with an extended SiN platform enables versatile, multi‐wavelength laser integration, establishing a practical route to complex light sources for advanced photonic systems.
- 1 October 2026
- Published by Wiley in Laser & Photonics Reviews
Open AccessHeterogeneous Integration of Multi‐Band Mode‐Locked and Single‐Mode Lasers on an Extended Commercial SiN Platform
Integrated silicon nitride (SiN) waveguides offer ultra‐low propagation loss across a broad transparency window, enabling large‐scale photonic integrated circuits (PICs) for applications from LiDAR to quantum photonics. However, integrating lasers on SiN PICs remains challenging due to the large refractive‐index contrast between SiN and high‐index III–V gain materials. We address this by extending Ligentec's commercial bi‐layer SiN platform with a polycrystalline silicon (Poly‐Si) layer and demonstrate heterogeneous integration of GaAs‐ and InP‐based amplifiers via a scalable process called micro‐transfer printing. Multi‐section adiabatic tapers ensure efficient coupling from the SiN to Poly‐Si layer and onward to the printed III–V devices. In a single fabrication run, we realize a diverse set of lasers, including the first O‐band GaAs‐on‐SiN mode‐locked laser (5.1 GHz repetition rate, 5.4 ps pulse width), a C‐band mode‐locked laser delivering >1 mW optical power per output, and multiple single‐mode sources (ring‐filter and distributed Bragg reflector cavities) with side‐mode suppression ratio up to 51 dB and intrinsic linewidth down to 1 kHz. These results demonstrate how combining micro‐transfer printing with an extended SiN platform enables versatile, multi‐wavelength laser integration, establishing a practical route to complex light sources for advanced photonic systems.
- 21 July 2026
- Published by Optica Publishing Group in Optics Letters
- Vol. 51 (15) , 4184
High-repetition-rate GaAs-on-SiN mode-locked laser using a Fabry–Pérot cavity
We demonstrate a 23.3 GHz GaAs-on-SiN mode-locked laser heterogeneously integrated on a commercial SiN platform using micro-transfer printing. A compact Fabry–Pérot cavity with a central saturable absorber enables colliding-pulse, second-harmonic mode locking. The device delivers up to 1 mW on-chip optical power from a single output port and generates eight comb lines within a 10 dB optical bandwidth. The pulse-forming operation is confirmed by autocorrelation measurements, yielding a deconvolved pulse width of 4.8 ps. This approach provides a scalable route toward electrically pumped high-repetition-rate pulse sources for nonlinear SiN photonic circuits.
- 21 July 2026
- Published by Optica Publishing Group in Optics Letters
- Vol. 51 (15) , 4184
High-repetition-rate GaAs-on-SiN mode-locked laser using a Fabry–Pérot cavity
We demonstrate a 23.3 GHz GaAs-on-SiN mode-locked laser heterogeneously integrated on a commercial SiN platform using micro-transfer printing. A compact Fabry–Pérot cavity with a central saturable absorber enables colliding-pulse, second-harmonic mode locking. The device delivers up to 1 mW on-chip optical power from a single output port and generates eight comb lines within a 10 dB optical bandwidth. The pulse-forming operation is confirmed by autocorrelation measurements, yielding a deconvolved pulse width of 4.8 ps. This approach provides a scalable route toward electrically pumped high-repetition-rate pulse sources for nonlinear SiN photonic circuits.
- 22 December 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (26) , 54747-54756
High-power heterogeneously integrated mode-locked laser enabled by a booster amplifier
Integrated mode-locked lasers have emerged as promising comb sources over recent years, with the prospect of their use in many applications such as telecommunications, lidar and dual-comb spectroscopy. While these integrated implementations have the advantage of a smaller footprint and cost compared to their table-top counterparts, the lower output powers have been a significant downside for their use in applications. Here, we demonstrate a heterogeneously integrated III/V-on-silicon nitride mode-locked laser with a 3 GHz repetition frequency. The heterogeneous integration is enabled by micro-transfer printing, which is a versatile approach utilized not only for the integration of the III/V semiconductor optical amplifier, but also a silicon interposer coupon. This two-step micro-transfer printing approach is used to integrate a mode-locked laser combined with a booster amplifier, placed at one of the mode-locked laser outputs, where the output power is amplified by up to 10.5 dB, enabling average powers of 11 dBm on-chip.
- 22 December 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (26) , 54747-54756
High-power heterogeneously integrated mode-locked laser enabled by a booster amplifier
Integrated mode-locked lasers have emerged as promising comb sources over recent years, with the prospect of their use in many applications such as telecommunications, lidar and dual-comb spectroscopy. While these integrated implementations have the advantage of a smaller footprint and cost compared to their table-top counterparts, the lower output powers have been a significant downside for their use in applications. Here, we demonstrate a heterogeneously integrated III/V-on-silicon nitride mode-locked laser with a 3 GHz repetition frequency. The heterogeneous integration is enabled by micro-transfer printing, which is a versatile approach utilized not only for the integration of the III/V semiconductor optical amplifier, but also a silicon interposer coupon. This two-step micro-transfer printing approach is used to integrate a mode-locked laser combined with a booster amplifier, placed at one of the mode-locked laser outputs, where the output power is amplified by up to 10.5 dB, enabling average powers of 11 dBm on-chip.
- 17 November 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (23) , 7207-7210
Compact microgear reflector-based laser heterogeneously integrated on a SiN platform
We report on heterogeneously integrated continuous-wave (CW) lasers on a SiN platform that employ a microgear as a wavelength-selective reflector. Heterogeneous integration is realized through micro-transfer printing (µTP), enabling compact, robust, and frequency-stable on-chip lasers without the need for phase shifters. The devices achieve up to 12.1 mW of on-chip optical output power and intrinsic linewidths as narrow as 3.7 kHz, highlighting the tradeoff between output coupling and coherence. The laser devices operate in single mode with side-mode suppression ratios exceeding 45 dB, and have a compact footprint of 4000 × 250 µm 2 . These results demonstrate a promising path to integrated lasers for coherent communications and LiDAR.
- 17 November 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (23) , 7207-7210
Compact microgear reflector-based laser heterogeneously integrated on a SiN platform
We report on heterogeneously integrated continuous-wave (CW) lasers on a SiN platform that employ a microgear as a wavelength-selective reflector. Heterogeneous integration is realized through micro-transfer printing (µTP), enabling compact, robust, and frequency-stable on-chip lasers without the need for phase shifters. The devices achieve up to 12.1 mW of on-chip optical output power and intrinsic linewidths as narrow as 3.7 kHz, highlighting the tradeoff between output coupling and coherence. The laser devices operate in single mode with side-mode suppression ratios exceeding 45 dB, and have a compact footprint of 4000 × 250 µm 2 . These results demonstrate a promising path to integrated lasers for coherent communications and LiDAR.
- Top Cited PapersOpen Access
- 1 January 2024
- Published by AIP Publishing in APL Photonics
- Vol. 9 (1)
Present and future of micro-transfer printing for heterogeneous photonic integrated circuits
We present the current state of the art in micro-transfer printing for heterogeneously integrated silicon photonic integrated circuits. The versatility of the technology is highlighted, as is the way ahead to make this technology a key enabler for next-generation photonic systems-on-chip.
- 1 January 2024
- Published by AIP Publishing in APL Photonics
- Vol. 9 (1)
Top Cited PapersOpen AccessPresent and future of micro-transfer printing for heterogeneous photonic integrated circuits
We present the current state of the art in micro-transfer printing for heterogeneously integrated silicon photonic integrated circuits. The versatility of the technology is highlighted, as is the way ahead to make this technology a key enabler for next-generation photonic systems-on-chip.
- Top Cited PapersOpen Access
- 1 August 2023
- Published by AIP Publishing in APL Photonics
- Vol. 8 (8)
Heterogeneous integration of a high-speed lithium niobate modulator on silicon nitride using micro-transfer printing
Integrated photonic systems require fast modulators to keep up with demanding operation speeds and increasing data rates. The silicon nitride integrated photonic platform is of particular interest for applications such as datacom, light detection and ranging (LIDAR), quantum photonics, and computing owing to its low losses and CMOS compatibility. Yet, this platform inherently lacks high-speed modulators. Heterogeneous integration of lithium niobate on silicon nitride waveguides can address this drawback with its strong Pockels effect. We demonstrate the first high-speed lithium niobate modulator heterogeneously integrated on silicon nitride using micro-transfer printing. The device is 2 mm long with a half-wave voltage Vπ of 14.8 V. The insertion loss and extinction ratio are 3.3 and 39 dB, respectively. Operation beyond 50 GHz has been demonstrated with the generation of open eye diagrams up to 70 Gb/s. This proof-of-principle demonstration opens up possibilities for more scalable fabrication of these trusted and performant devices.
- 1 August 2023
- Published by AIP Publishing in APL Photonics
- Vol. 8 (8)
Top Cited PapersOpen AccessHeterogeneous integration of a high-speed lithium niobate modulator on silicon nitride using micro-transfer printing
Integrated photonic systems require fast modulators to keep up with demanding operation speeds and increasing data rates. The silicon nitride integrated photonic platform is of particular interest for applications such as datacom, light detection and ranging (LIDAR), quantum photonics, and computing owing to its low losses and CMOS compatibility. Yet, this platform inherently lacks high-speed modulators. Heterogeneous integration of lithium niobate on silicon nitride waveguides can address this drawback with its strong Pockels effect. We demonstrate the first high-speed lithium niobate modulator heterogeneously integrated on silicon nitride using micro-transfer printing. The device is 2 mm long with a half-wave voltage Vπ of 14.8 V. The insertion loss and extinction ratio are 3.3 and 39 dB, respectively. Operation beyond 50 GHz has been demonstrated with the generation of open eye diagrams up to 70 Gb/s. This proof-of-principle demonstration opens up possibilities for more scalable fabrication of these trusted and performant devices.
- Open Access
- 29 April 2021
- Published by Optica Publishing Group in Optics Express
- Vol. 29 (10) , 15013-15022
Hybrid integrated mode-locked laser diodes with a silicon nitride extended cavity
Integrated semiconductor mode-locked lasers have shown promise in many applications and are readily fabricated using generic InP photonic integration platforms. However, the passive waveguides offered in such platforms have relatively high linear and nonlinear losses that limit the performance of these lasers. By extending such lasers with, for example, an external cavity, the performance can be increased considerably. In this paper, we demonstrate for the first time that a high-performance mode-locked laser can be achieved with a butt-coupling integration technique using chip scale silicon nitride waveguides. A platform-independent SiN/SU8 coupler design is used to couple between the silicon nitride external cavity and the III/V active chip. Mode-locked lasers at 2.18 GHz and 15.5 GHz repetition rates are demonstrated with Lorentzian RF linewidths several orders of magnitude smaller than what has been demonstrated on monolithic InP platforms. The RF linewidth was 31 Hz for the 2.18 GHz laser.
- 29 April 2021
- Published by Optica Publishing Group in Optics Express
- Vol. 29 (10) , 15013-15022
Open AccessHybrid integrated mode-locked laser diodes with a silicon nitride extended cavity
Integrated semiconductor mode-locked lasers have shown promise in many applications and are readily fabricated using generic InP photonic integration platforms. However, the passive waveguides offered in such platforms have relatively high linear and nonlinear losses that limit the performance of these lasers. By extending such lasers with, for example, an external cavity, the performance can be increased considerably. In this paper, we demonstrate for the first time that a high-performance mode-locked laser can be achieved with a butt-coupling integration technique using chip scale silicon nitride waveguides. A platform-independent SiN/SU8 coupler design is used to couple between the silicon nitride external cavity and the III/V active chip. Mode-locked lasers at 2.18 GHz and 15.5 GHz repetition rates are demonstrated with Lorentzian RF linewidths several orders of magnitude smaller than what has been demonstrated on monolithic InP platforms. The RF linewidth was 31 Hz for the 2.18 GHz laser.