Tom Reep
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Tom Reep has a total of 97 co-authors. Here are the top co-authors by number of shared publications:
Bart Kuyken
8 shared publications- Dries Van Thourhout
Ghent University - IMEC
5 shared publications - Maximilien Billet
Ghent University - IMEC
5 shared publications Cheng-Han Wu
Photonics Research Group, Department of Information Technology (INTEC), Ghent University—IMEC, B-9000 Ghent, Belgium
4 shared publications- Stijn Poelman
Photonics Research Group, Department of Information Technology Ghent University ‐ imec, Ghent East Flanders Belgium
4 shared publications - Dongbo Wang
Photonics Research Group, Department of Information Technology Ghent University ‐ imec, Ghent East Flanders Belgium
3 shared publications
Latest Publications
- Open Access
- 1 October 2026
- Published by Wiley in Laser & Photonics Reviews
Heterogeneous Integration of Multi‐Band Mode‐Locked and Single‐Mode Lasers on an Extended Commercial SiN Platform
Integrated silicon nitride (SiN) waveguides offer ultra‐low propagation loss across a broad transparency window, enabling large‐scale photonic integrated circuits (PICs) for applications from LiDAR to quantum photonics. However, integrating lasers on SiN PICs remains challenging due to the large refractive‐index contrast between SiN and high‐index III–V gain materials. We address this by extending Ligentec's commercial bi‐layer SiN platform with a polycrystalline silicon (Poly‐Si) layer and demonstrate heterogeneous integration of GaAs‐ and InP‐based amplifiers via a scalable process called micro‐transfer printing. Multi‐section adiabatic tapers ensure efficient coupling from the SiN to Poly‐Si layer and onward to the printed III–V devices. In a single fabrication run, we realize a diverse set of lasers, including the first O‐band GaAs‐on‐SiN mode‐locked laser (5.1 GHz repetition rate, 5.4 ps pulse width), a C‐band mode‐locked laser delivering >1 mW optical power per output, and multiple single‐mode sources (ring‐filter and distributed Bragg reflector cavities) with side‐mode suppression ratio up to 51 dB and intrinsic linewidth down to 1 kHz. These results demonstrate how combining micro‐transfer printing with an extended SiN platform enables versatile, multi‐wavelength laser integration, establishing a practical route to complex light sources for advanced photonic systems.
- 1 October 2026
- Published by Wiley in Laser & Photonics Reviews
Open AccessHeterogeneous Integration of Multi‐Band Mode‐Locked and Single‐Mode Lasers on an Extended Commercial SiN Platform
Integrated silicon nitride (SiN) waveguides offer ultra‐low propagation loss across a broad transparency window, enabling large‐scale photonic integrated circuits (PICs) for applications from LiDAR to quantum photonics. However, integrating lasers on SiN PICs remains challenging due to the large refractive‐index contrast between SiN and high‐index III–V gain materials. We address this by extending Ligentec's commercial bi‐layer SiN platform with a polycrystalline silicon (Poly‐Si) layer and demonstrate heterogeneous integration of GaAs‐ and InP‐based amplifiers via a scalable process called micro‐transfer printing. Multi‐section adiabatic tapers ensure efficient coupling from the SiN to Poly‐Si layer and onward to the printed III–V devices. In a single fabrication run, we realize a diverse set of lasers, including the first O‐band GaAs‐on‐SiN mode‐locked laser (5.1 GHz repetition rate, 5.4 ps pulse width), a C‐band mode‐locked laser delivering >1 mW optical power per output, and multiple single‐mode sources (ring‐filter and distributed Bragg reflector cavities) with side‐mode suppression ratio up to 51 dB and intrinsic linewidth down to 1 kHz. These results demonstrate how combining micro‐transfer printing with an extended SiN platform enables versatile, multi‐wavelength laser integration, establishing a practical route to complex light sources for advanced photonic systems.
- 21 July 2026
- Published by Optica Publishing Group in Optics Letters
- Vol. 51 (15) , 4184
High-repetition-rate GaAs-on-SiN mode-locked laser using a Fabry–Pérot cavity
We demonstrate a 23.3 GHz GaAs-on-SiN mode-locked laser heterogeneously integrated on a commercial SiN platform using micro-transfer printing. A compact Fabry–Pérot cavity with a central saturable absorber enables colliding-pulse, second-harmonic mode locking. The device delivers up to 1 mW on-chip optical power from a single output port and generates eight comb lines within a 10 dB optical bandwidth. The pulse-forming operation is confirmed by autocorrelation measurements, yielding a deconvolved pulse width of 4.8 ps. This approach provides a scalable route toward electrically pumped high-repetition-rate pulse sources for nonlinear SiN photonic circuits.
- 21 July 2026
- Published by Optica Publishing Group in Optics Letters
- Vol. 51 (15) , 4184
High-repetition-rate GaAs-on-SiN mode-locked laser using a Fabry–Pérot cavity
We demonstrate a 23.3 GHz GaAs-on-SiN mode-locked laser heterogeneously integrated on a commercial SiN platform using micro-transfer printing. A compact Fabry–Pérot cavity with a central saturable absorber enables colliding-pulse, second-harmonic mode locking. The device delivers up to 1 mW on-chip optical power from a single output port and generates eight comb lines within a 10 dB optical bandwidth. The pulse-forming operation is confirmed by autocorrelation measurements, yielding a deconvolved pulse width of 4.8 ps. This approach provides a scalable route toward electrically pumped high-repetition-rate pulse sources for nonlinear SiN photonic circuits.
- Open Access
- 30 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. PP (07338724) , 1-16
Micro-Transfer Printing on Silicon Photonics: Tutorial, Recent Progress and Outlook
This paper highlights micro-transfer printing (MTP) as a promising scalable approach to heterogeneous integration for silicon photonics. MTP uniquely achieves high integration density, high throughput, and high material efficiency through a low-temperature, back-end integration process. Current demonstrations, including integrated III-V lasers and thin-film electro-optic modulators, confirm MTP's potential. Industrial adoption requires resolving challenges related to final integration yield and throughput, device reliability, and supply chain maturity.
- 30 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. PP (07338724) , 1-16
Open AccessMicro-Transfer Printing on Silicon Photonics: Tutorial, Recent Progress and Outlook
This paper highlights micro-transfer printing (MTP) as a promising scalable approach to heterogeneous integration for silicon photonics. MTP uniquely achieves high integration density, high throughput, and high material efficiency through a low-temperature, back-end integration process. Current demonstrations, including integrated III-V lasers and thin-film electro-optic modulators, confirm MTP's potential. Industrial adoption requires resolving challenges related to final integration yield and throughput, device reliability, and supply chain maturity.
- 27 February 2026
- Published by IOP Publishing in 2D Materials
- Vol. 13 (2) , 025012
A 25 GBd co-integration demonstration of wafer-scale graphene modulator and BiCMOS driver
We demonstrate the first co-integration of a wafer-scale single-layer graphene electro-absorption modulator (EAM) with a high-speed SiGe bipolar CMOS (BiCMOS) electronic integrated circuit (EIC), achieving robust operation up to 25 GBd. The scalable graphene EAM, fabricated in a 300 mm CMOS pilot line, exhibits an intrinsic electro-optic (EO) bandwidth of 11.2 GHz. To overcome the RC-limitation and simultaneously enable low-voltage operation, the EIC was co-designed with a 30 Ω internal termination impedance and amplifies the voltage swing by a factor of 3. This optimization increased the effective EO bandwidth and allowed the co-integrated system to produce open eye diagrams at 25 GBd from a low 500 mV p p input drive voltage. We report measured Q -factors and an estimated bit error rate of 1.37 × 10 − 7 at 25 GBd using a 5-tap feed-forward equalizer. This work demonstrates the first functional EO link co-integrating a graphene modulator with a BiCMOS electronic driver. By validating this wire-bonded interface, we establish a feasible and practical route towards energy-efficient, scalable photonic interconnects.
- 27 February 2026
- Published by IOP Publishing in 2D Materials
- Vol. 13 (2) , 025012
A 25 GBd co-integration demonstration of wafer-scale graphene modulator and BiCMOS driver
We demonstrate the first co-integration of a wafer-scale single-layer graphene electro-absorption modulator (EAM) with a high-speed SiGe bipolar CMOS (BiCMOS) electronic integrated circuit (EIC), achieving robust operation up to 25 GBd. The scalable graphene EAM, fabricated in a 300 mm CMOS pilot line, exhibits an intrinsic electro-optic (EO) bandwidth of 11.2 GHz. To overcome the RC-limitation and simultaneously enable low-voltage operation, the EIC was co-designed with a 30 Ω internal termination impedance and amplifies the voltage swing by a factor of 3. This optimization increased the effective EO bandwidth and allowed the co-integrated system to produce open eye diagrams at 25 GBd from a low 500 mV p p input drive voltage. We report measured Q -factors and an estimated bit error rate of 1.37 × 10 − 7 at 25 GBd using a 5-tap feed-forward equalizer. This work demonstrates the first functional EO link co-integrating a graphene modulator with a BiCMOS electronic driver. By validating this wire-bonded interface, we establish a feasible and practical route towards energy-efficient, scalable photonic interconnects.
- 26 February 2026
- Published by Optica Publishing Group in Optics Letters
- Vol. 51 (5) , 1315-1318
Compact and electrically driven active mode-locked laser at 10 GHz repetition rate based on a graphene electro-absorption modulator
In this Letter, we demonstrate an actively mode-locked laser at telecom wavelength made of graphene electro-absorption modulator on a photonic integrated circuit, inserted in a dispersion-engineered cavity with III–V semiconductor optical amplifiers as gain medium. Stable low-jitter pulse trains at 10 GHz with 2.9 ps deconvoluted pulse widths are achieved, with performances comparable to a commercial lithium niobate high-speed modulator. These results highlight the potential of integrated graphene-based devices for the realization of compact and stable optical clocks operating at high repetition rate.
- 26 February 2026
- Published by Optica Publishing Group in Optics Letters
- Vol. 51 (5) , 1315-1318
Compact and electrically driven active mode-locked laser at 10 GHz repetition rate based on a graphene electro-absorption modulator
In this Letter, we demonstrate an actively mode-locked laser at telecom wavelength made of graphene electro-absorption modulator on a photonic integrated circuit, inserted in a dispersion-engineered cavity with III–V semiconductor optical amplifiers as gain medium. Stable low-jitter pulse trains at 10 GHz with 2.9 ps deconvoluted pulse widths are achieved, with performances comparable to a commercial lithium niobate high-speed modulator. These results highlight the potential of integrated graphene-based devices for the realization of compact and stable optical clocks operating at high repetition rate.
- 22 December 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (26) , 54747-54756
High-power heterogeneously integrated mode-locked laser enabled by a booster amplifier
Integrated mode-locked lasers have emerged as promising comb sources over recent years, with the prospect of their use in many applications such as telecommunications, lidar and dual-comb spectroscopy. While these integrated implementations have the advantage of a smaller footprint and cost compared to their table-top counterparts, the lower output powers have been a significant downside for their use in applications. Here, we demonstrate a heterogeneously integrated III/V-on-silicon nitride mode-locked laser with a 3 GHz repetition frequency. The heterogeneous integration is enabled by micro-transfer printing, which is a versatile approach utilized not only for the integration of the III/V semiconductor optical amplifier, but also a silicon interposer coupon. This two-step micro-transfer printing approach is used to integrate a mode-locked laser combined with a booster amplifier, placed at one of the mode-locked laser outputs, where the output power is amplified by up to 10.5 dB, enabling average powers of 11 dBm on-chip.
- 22 December 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (26) , 54747-54756
High-power heterogeneously integrated mode-locked laser enabled by a booster amplifier
Integrated mode-locked lasers have emerged as promising comb sources over recent years, with the prospect of their use in many applications such as telecommunications, lidar and dual-comb spectroscopy. While these integrated implementations have the advantage of a smaller footprint and cost compared to their table-top counterparts, the lower output powers have been a significant downside for their use in applications. Here, we demonstrate a heterogeneously integrated III/V-on-silicon nitride mode-locked laser with a 3 GHz repetition frequency. The heterogeneous integration is enabled by micro-transfer printing, which is a versatile approach utilized not only for the integration of the III/V semiconductor optical amplifier, but also a silicon interposer coupon. This two-step micro-transfer printing approach is used to integrate a mode-locked laser combined with a booster amplifier, placed at one of the mode-locked laser outputs, where the output power is amplified by up to 10.5 dB, enabling average powers of 11 dBm on-chip.
- 1 December 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (22)
1T′-MoTe2 as an integrated saturable absorber for photonic machine learning
We investigate the saturable absorption behavior of a 1T′-MoTe2 monolayer integrated with a silicon nitride waveguide for applications in photonic neural networks. Using experimental transmission measurements and theoretical modeling, we characterize the nonlinear response of the material. Our model, incorporating quasi-Fermi level separation and carrier dynamics, explains these behaviors and predicts the material's absorption dependence on the carrier density. Furthermore, we demonstrate a coupling efficiency of up to 20% between the 1T′-MoTe2 monolayer and the silicon nitride waveguide, with saturation achievable at input powers as low as a few microwatts. These results suggest that 1T′-MoTe2 is a promising candidate for implementing nonlinear functions in integrated photonic neural networks.
- 1 December 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (22)
1T′-MoTe2 as an integrated saturable absorber for photonic machine learning
We investigate the saturable absorption behavior of a 1T′-MoTe2 monolayer integrated with a silicon nitride waveguide for applications in photonic neural networks. Using experimental transmission measurements and theoretical modeling, we characterize the nonlinear response of the material. Our model, incorporating quasi-Fermi level separation and carrier dynamics, explains these behaviors and predicts the material's absorption dependence on the carrier density. Furthermore, we demonstrate a coupling efficiency of up to 20% between the 1T′-MoTe2 monolayer and the silicon nitride waveguide, with saturation achievable at input powers as low as a few microwatts. These results suggest that 1T′-MoTe2 is a promising candidate for implementing nonlinear functions in integrated photonic neural networks.
- 17 November 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (23) , 7207-7210
Compact microgear reflector-based laser heterogeneously integrated on a SiN platform
We report on heterogeneously integrated continuous-wave (CW) lasers on a SiN platform that employ a microgear as a wavelength-selective reflector. Heterogeneous integration is realized through micro-transfer printing (µTP), enabling compact, robust, and frequency-stable on-chip lasers without the need for phase shifters. The devices achieve up to 12.1 mW of on-chip optical output power and intrinsic linewidths as narrow as 3.7 kHz, highlighting the tradeoff between output coupling and coherence. The laser devices operate in single mode with side-mode suppression ratios exceeding 45 dB, and have a compact footprint of 4000 × 250 µm 2 . These results demonstrate a promising path to integrated lasers for coherent communications and LiDAR.
- 17 November 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (23) , 7207-7210
Compact microgear reflector-based laser heterogeneously integrated on a SiN platform
We report on heterogeneously integrated continuous-wave (CW) lasers on a SiN platform that employ a microgear as a wavelength-selective reflector. Heterogeneous integration is realized through micro-transfer printing (µTP), enabling compact, robust, and frequency-stable on-chip lasers without the need for phase shifters. The devices achieve up to 12.1 mW of on-chip optical output power and intrinsic linewidths as narrow as 3.7 kHz, highlighting the tradeoff between output coupling and coherence. The laser devices operate in single mode with side-mode suppression ratios exceeding 45 dB, and have a compact footprint of 4000 × 250 µm 2 . These results demonstrate a promising path to integrated lasers for coherent communications and LiDAR.
- Open Access
- 30 June 2025
- Published by IOP Publishing in 2D Materials
- Vol. 12 (4)
Low-loss phase modulation using a MoS2 monolayer integrated on silicon waveguides
Two dimensional (2D) materials present a cutting-edge research frontier in integrated modulators. However, achieving pure phase modulation with low insertion loss using 2D-material modulators remains challenging. This work explores phase modulators based on monolayer MoS2 integrated on a Si photonic platform. We investigated the electro-optical response of MoS2 using two device architectures: a monolayer MoS2 integrated on a doped Si waveguide and a MoS2-Al2O3-MoS2 capacitor integrated on an undoped Si waveguide. At a wavelength of 1550 nm, the integration of MoS2 in both architectures induces minimal optical insertion losses. Specifically, the single-layer device on a doped silicon waveguide achieves a phase modulation efficiency of 0.53 V·cm, with propagation losses dominantly originating from the doped silicon (108 dB/cm). The MoS2-Al2O3-MoS2 modulator has a modulation efficiency of 1 V·cm with low propagation losses (6.4 dB/cm). Depending on the resistance-capacitance constant, a trade-off exists between achievable modulation efficiency, electro-optical bandwidth, and insertion loss. This strong and lossless electro-refractive response from MoS2-based phase modulators is suitable for a variety of applications such as light detection and ranging, optical switching, quantum and optical neural networks, and coherent optical communication.
- 30 June 2025
- Published by IOP Publishing in 2D Materials
- Vol. 12 (4)
Open AccessLow-loss phase modulation using a MoS2 monolayer integrated on silicon waveguides
Two dimensional (2D) materials present a cutting-edge research frontier in integrated modulators. However, achieving pure phase modulation with low insertion loss using 2D-material modulators remains challenging. This work explores phase modulators based on monolayer MoS2 integrated on a Si photonic platform. We investigated the electro-optical response of MoS2 using two device architectures: a monolayer MoS2 integrated on a doped Si waveguide and a MoS2-Al2O3-MoS2 capacitor integrated on an undoped Si waveguide. At a wavelength of 1550 nm, the integration of MoS2 in both architectures induces minimal optical insertion losses. Specifically, the single-layer device on a doped silicon waveguide achieves a phase modulation efficiency of 0.53 V·cm, with propagation losses dominantly originating from the doped silicon (108 dB/cm). The MoS2-Al2O3-MoS2 modulator has a modulation efficiency of 1 V·cm with low propagation losses (6.4 dB/cm). Depending on the resistance-capacitance constant, a trade-off exists between achievable modulation efficiency, electro-optical bandwidth, and insertion loss. This strong and lossless electro-refractive response from MoS2-based phase modulators is suitable for a variety of applications such as light detection and ranging, optical switching, quantum and optical neural networks, and coherent optical communication.
- Open Access
- 19 March 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-10
Graphene absorber on an SOI chip for active and passive mode locking of lasers
We demonstrate both passive and active mode-locking of fiber lasers using a graphene-based absorber integrated on a silicon photonics platform manufactured using a wafer-scale CMOS process. Passive mode-locking is achieved at a 28 MHz repetition rate, generating 1.7 ps optical pulses, while active mode-locking is demonstrated at repetition rates of 4 GHz and 10 GHz. This work demonstrates the potential of scalable graphene-based saturable absorbers for fiber laser locking and paves the way for future fully integrated mode-locked laser systems.
- 19 March 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-10
Open AccessGraphene absorber on an SOI chip for active and passive mode locking of lasers
We demonstrate both passive and active mode-locking of fiber lasers using a graphene-based absorber integrated on a silicon photonics platform manufactured using a wafer-scale CMOS process. Passive mode-locking is achieved at a 28 MHz repetition rate, generating 1.7 ps optical pulses, while active mode-locking is demonstrated at repetition rates of 4 GHz and 10 GHz. This work demonstrates the potential of scalable graphene-based saturable absorbers for fiber laser locking and paves the way for future fully integrated mode-locked laser systems.