Umut Yaşar Uzunali
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Umut Yaşar Uzunali has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
Hamdullah Çuvalcı
Metallurgical and Material Engineering , 52976 Karadeniz Technical University , Trabzon , Türkiye
2 shared publicationsHamdullah Cuvalci
Department of Metallurgical and Material Engineering , Karadeniz Technical University , Trabzon , Türkiye
1 shared publication- Hamdullah Çuvalcı
Karadeniz Technical University
1 shared publication - Hamdullah Çuvalcı
Department of Metallurgical and Materials Engineering, Karadeniz Technical University, Trabzon, Turkey
1 shared publication - Özlem Canpolat
Abdullah Kanca Vocational School of Higher Education, Karadeniz Technical University, Trabzon, Turkey
1 shared publication Ümit Kartal
52976 Medical Device Design and Production Application and Research Center, Karadeniz Technical University , Trabzon , Türkiye
1 shared publication
Latest Publications
- 19 February 2026
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 35 (23) , 23814-23826
Influence of Penetration Rate on Corrosion and Mechanical Characteristics of Welded Armor Steel
- 19 February 2026
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 35 (23) , 23814-23826
Influence of Penetration Rate on Corrosion and Mechanical Characteristics of Welded Armor Steel
- 25 February 2025
- Published by Walter de Gruyter GmbH in Materials Testing
- Vol. 67 (4) , 675-689
Fatigue strength of welded armor steels with different weld penetration
Armor steels are crucial for their high hardness and toughness, providing protection in military and security applications, including vehicles and personal body armor. This study aims to assess the fatigue strength of welded armor steels having different weld penetration. Weld fusion or penetration (FOP) is an important issue in terms of welded joint strength. Especially in non-load carrying joints, how the fatigue strength will change with the increase in weld FOP can only be determined by the tests to be performed. In this context, the joint type was chosen as a non-load carrying cruciform joint in this study. Weld FOP is determined in terms of length in many studies. In this study, these values were evaluated in terms of unit of area as well as length. In addition to the experimental fatigue studies, specimens having different weld FOP rates were modeled and hot-spot stress analyses were performed by ANSYS workbench. As a result of the studies, a decrease in fatigue strength was determined by the increase in the weld FOP rate. The analysis revealed that as FOP rate increased, the hot-spot stress values became closer to the nominal stress.
- 25 February 2025
- Published by Walter de Gruyter GmbH in Materials Testing
- Vol. 67 (4) , 675-689
Fatigue strength of welded armor steels with different weld penetration
Armor steels are crucial for their high hardness and toughness, providing protection in military and security applications, including vehicles and personal body armor. This study aims to assess the fatigue strength of welded armor steels having different weld penetration. Weld fusion or penetration (FOP) is an important issue in terms of welded joint strength. Especially in non-load carrying joints, how the fatigue strength will change with the increase in weld FOP can only be determined by the tests to be performed. In this context, the joint type was chosen as a non-load carrying cruciform joint in this study. Weld FOP is determined in terms of length in many studies. In this study, these values were evaluated in terms of unit of area as well as length. In addition to the experimental fatigue studies, specimens having different weld FOP rates were modeled and hot-spot stress analyses were performed by ANSYS workbench. As a result of the studies, a decrease in fatigue strength was determined by the increase in the weld FOP rate. The analysis revealed that as FOP rate increased, the hot-spot stress values became closer to the nominal stress.
- 23 January 2025
- Published by Walter de Gruyter GmbH in Materials Testing
- Vol. 67 (3) , 503-519
Comparative analysis of cutting methods and their impact on fatigue properties of armor steel
Armor steel is widely used in various industries due to its exceptional yield strength and hardness. However, the cutting processes employed to shape these materials, such as laser and waterjet cutting, may exert a substantial influence on the fatigue resistance of the end product. Fatigue strength is a critical property in materials science, particularly when it comes to high strength steel. As industries strive for lighter and more efficient structures, the demand for materials with superior fatigue resistance becomes paramount. In this article, it is aimed to investigate the effects of laser and waterjet cutting processes on the fatigue strength of armor steel based on experimental results, highlighting the implications for structural integrity and performance. The samples cut by water jet and laser cutting processes were subjected to fatigue tests with and without anti-buckling apparatus. Fatigue tests were carried out at least four different stress values and S–N diagrams were created for 4 different situations. As a result of this study, it was determined that the fatigue strength of samples obtained by laser cutting method is lower than that of waterjet cutting samples. Additionally, it was observed that the fatigue strength of the samples using anti-buckling apparatus was higher.
- 23 January 2025
- Published by Walter de Gruyter GmbH in Materials Testing
- Vol. 67 (3) , 503-519
Comparative analysis of cutting methods and their impact on fatigue properties of armor steel
Armor steel is widely used in various industries due to its exceptional yield strength and hardness. However, the cutting processes employed to shape these materials, such as laser and waterjet cutting, may exert a substantial influence on the fatigue resistance of the end product. Fatigue strength is a critical property in materials science, particularly when it comes to high strength steel. As industries strive for lighter and more efficient structures, the demand for materials with superior fatigue resistance becomes paramount. In this article, it is aimed to investigate the effects of laser and waterjet cutting processes on the fatigue strength of armor steel based on experimental results, highlighting the implications for structural integrity and performance. The samples cut by water jet and laser cutting processes were subjected to fatigue tests with and without anti-buckling apparatus. Fatigue tests were carried out at least four different stress values and S–N diagrams were created for 4 different situations. As a result of this study, it was determined that the fatigue strength of samples obtained by laser cutting method is lower than that of waterjet cutting samples. Additionally, it was observed that the fatigue strength of the samples using anti-buckling apparatus was higher.
- 29 January 2024
- Published by Walter de Gruyter GmbH in Materials Testing
- Vol. 66 (3) , 364-379
Effect of welding parameters on cruciform weld joints made of armor steel
It is aimed to examine the effect of welding parameters on cruciform welded joints. Armor steels are used in military applications such as tracked and wheeled armored vehicles. These steels are quenched and tempered steels and have high yield stress and hardness. Although the increase in carbon equivalent increases the ballistic level together with the hardness value, weldability decreases. Therefore, the welding parameters of these steels must be determined carefully. Before the welding, chemical analysis, macro examination, hardness test, tensile tests and ultrasonic examination were carried out to verify the material properties. After the verification tests, plates were welded with three different welding parameters to observe the changing of the mechanical properties. After the welding process, welded pieces were subjected to non-destructive tests to inspect the weld imperfections. After the inspection, welded specimens were subjected to hardness test, macro examination and tensile tests. In addition to these tests, weld penetration (WP) measurements were performed with a new assessment method. In this measurement method, unit of area takes into consideration instead of the unit of length. As a result, it is determined that with the increasing welding parameters although WP increase, hardness values in heat affected zone decrease.
- 29 January 2024
- Published by Walter de Gruyter GmbH in Materials Testing
- Vol. 66 (3) , 364-379
Effect of welding parameters on cruciform weld joints made of armor steel
It is aimed to examine the effect of welding parameters on cruciform welded joints. Armor steels are used in military applications such as tracked and wheeled armored vehicles. These steels are quenched and tempered steels and have high yield stress and hardness. Although the increase in carbon equivalent increases the ballistic level together with the hardness value, weldability decreases. Therefore, the welding parameters of these steels must be determined carefully. Before the welding, chemical analysis, macro examination, hardness test, tensile tests and ultrasonic examination were carried out to verify the material properties. After the verification tests, plates were welded with three different welding parameters to observe the changing of the mechanical properties. After the welding process, welded pieces were subjected to non-destructive tests to inspect the weld imperfections. After the inspection, welded specimens were subjected to hardness test, macro examination and tensile tests. In addition to these tests, weld penetration (WP) measurements were performed with a new assessment method. In this measurement method, unit of area takes into consideration instead of the unit of length. As a result, it is determined that with the increasing welding parameters although WP increase, hardness values in heat affected zone decrease.
- Open Access
- 1 December 2023
- Published by Gazi University Journal of Science in Gazi University Journal of Science
- Vol. 36 (4) , 1746-1757
Review of the Definition of Weld Penetration, Depth of Fusion and Throat Thickness on Fillet Welds
In this study, definitions of Weld Penetration (WP), Depth of Fusion (DOF) and Throat Thickness (TT) in fillet welds according to related standards are evaluated. Each standard makes its own definition related to WP, DOF and TT. Moreover, when looking at these standards, it is seen that definitions are always made in terms of unit of length. In many studies, assessment of fusion or penetration (FOP) rate on fillet welds is performed as the ratio of the maximum FOP depth to the material thickness. Depth assessment taking into consideration unit of length is not ideal for accurate evaluation of FOP rates especially on fillet welds. In the evaluation made in terms of unit of length, FOP rate can be approximately 50 percent more than the evaluation made in terms of unit of area. Method taking into consideration unit of area will be more suitable as it allows accurate assessment of FOP rates in welded joints. In this review, in addition to evaluation of the definitions of standards, it is also suggested that the evaluation of FOP rate on fillet welds should be determined in terms of unit of area rather than length.
- 1 December 2023
- Published by Gazi University Journal of Science in Gazi University Journal of Science
- Vol. 36 (4) , 1746-1757
Open AccessReview of the Definition of Weld Penetration, Depth of Fusion and Throat Thickness on Fillet Welds
In this study, definitions of Weld Penetration (WP), Depth of Fusion (DOF) and Throat Thickness (TT) in fillet welds according to related standards are evaluated. Each standard makes its own definition related to WP, DOF and TT. Moreover, when looking at these standards, it is seen that definitions are always made in terms of unit of length. In many studies, assessment of fusion or penetration (FOP) rate on fillet welds is performed as the ratio of the maximum FOP depth to the material thickness. Depth assessment taking into consideration unit of length is not ideal for accurate evaluation of FOP rates especially on fillet welds. In the evaluation made in terms of unit of length, FOP rate can be approximately 50 percent more than the evaluation made in terms of unit of area. Method taking into consideration unit of area will be more suitable as it allows accurate assessment of FOP rates in welded joints. In this review, in addition to evaluation of the definitions of standards, it is also suggested that the evaluation of FOP rate on fillet welds should be determined in terms of unit of area rather than length.