Zimeng Guo
Research Subjects
Zimeng Guo has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Huijin Guo
School of Automotive Studies, Tongji University, Shanghai 201804, China
1 shared publication - Jinghui Zhao
School of Automotive Engineering, Tongji University, Shanghai 201804, China
1 shared publication - Shaobo Ping
AT&M Environmental Engineering Technology Co., Ltd., No. 76 Xueyuan South Road, Haidian District, Beijing 100081, China
1 shared publication - Tiancai Ma
School of Automotive Studies, Tongji University, Shanghai 201804, China
1 shared publication - Weikang Lin
School of Automotive Studies, Tongji University, Shanghai 201804, China
1 shared publication - Wen Shi
AT&M Environmental Engineering Technology Co., Ltd., No. 76 Xueyuan South Road, Haidian District, Beijing 100081, China
1 shared publication
Latest Publications
- Open Access
- 4 August 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (15) , 12002
Research on Design and Optimization of Large Metal Bipolar Plate Sealing for Proton Exchange Membrane Fuel Cells
The sealing system, as the most important load-bearing component, is a critical part of the stack assembly in a proton exchange membrane fuel cell (PEMFC). Currently, flat or single-peak sealing gaskets are commonly used for large metal bipolar plate sealing, which can easily cause problems such as significant internal stress and distortion displacement. In order to solve this problem, an innovative double-peak sealing gasket structure is proposed. Based on the Mooney–Rivlin constitutive model, the impact of the sealing material hardness, friction coefficient, and compression ratio on the sealing performance are investigated. Meanwhile, the double-peak seal is fabricated and assembled into a single fuel cell for testing. The results show that the sealing performance of a double-peak sealing gasket with extended wings has been optimized, and the maximum contact pressure on the upper and lower contact surfaces is 1.2 MPa and 0.67 MPa, respectively, which is greater than the given air pressure of 0.1 MPa. And the sealing effect is optimal with a 45 Shore A hardness rubber, a friction coefficient of 0.05, and an initial compression ratio of 35%. The simulation and experimental sealing performance of the sealing gasket under different compression ratios remain similar.
- 4 August 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (15) , 12002
Open AccessResearch on Design and Optimization of Large Metal Bipolar Plate Sealing for Proton Exchange Membrane Fuel Cells
The sealing system, as the most important load-bearing component, is a critical part of the stack assembly in a proton exchange membrane fuel cell (PEMFC). Currently, flat or single-peak sealing gaskets are commonly used for large metal bipolar plate sealing, which can easily cause problems such as significant internal stress and distortion displacement. In order to solve this problem, an innovative double-peak sealing gasket structure is proposed. Based on the Mooney–Rivlin constitutive model, the impact of the sealing material hardness, friction coefficient, and compression ratio on the sealing performance are investigated. Meanwhile, the double-peak seal is fabricated and assembled into a single fuel cell for testing. The results show that the sealing performance of a double-peak sealing gasket with extended wings has been optimized, and the maximum contact pressure on the upper and lower contact surfaces is 1.2 MPa and 0.67 MPa, respectively, which is greater than the given air pressure of 0.1 MPa. And the sealing effect is optimal with a 45 Shore A hardness rubber, a friction coefficient of 0.05, and an initial compression ratio of 35%. The simulation and experimental sealing performance of the sealing gasket under different compression ratios remain similar.