Viktoria Yuryevna Ivashchenko
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Viktoria Yuryevna Ivashchenko has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Dmitry Pavlovich Il’yashchenko
Yurga Technological Institute, National Research Tomsk Polytechnic University, 30 Lenin Av., Tomsk 634050, Russia
1 shared publication - Elena Lavrova
State Higher Educational Institution «Priazovskiy State Technical University
1 shared publication - Fedor Viktorovich Morgay
Pryazovsky State Technical University, Universitetskaya 7, Mariupol 287555
1 shared publication - Vitaliy Ivanov
Priazovsky State Technical University
1 shared publication
Latest Publications
- Open Access
The Effect of Welding Mode Parameters on the Operational Properties of Flexible Compensating Elements Made of Austenitic Stainless Steels
The paper investigates the effect of welding mode parameters on the uniformity of the deformation capacity of AISI 316 austenitic steel samples, namely, the influence of the welding current and purging gas consumption on the samples’ ability to perceive the force of cold cupping. Punch diameters of 3 and 8 mm were employed for the Erikson test to establish the dependence of the purge gas flow rate on the depth of the hole before the formation of cracks. The conducted metallographic studies confirmed an increase in the homogeneity of the dendritic structure in the weld zone due to the redistribution of heat input, as well as the absence of uneven grains and a decrease in the spread of grain sizes, which were in the range of 0.068–0.045 mm. The study resulted in determining the optimal range of technological parameters for the manufacture of flexible expansion elements to ensure their high operational properties.
Open AccessThe Effect of Welding Mode Parameters on the Operational Properties of Flexible Compensating Elements Made of Austenitic Stainless Steels
The paper investigates the effect of welding mode parameters on the uniformity of the deformation capacity of AISI 316 austenitic steel samples, namely, the influence of the welding current and purging gas consumption on the samples’ ability to perceive the force of cold cupping. Punch diameters of 3 and 8 mm were employed for the Erikson test to establish the dependence of the purge gas flow rate on the depth of the hole before the formation of cracks. The conducted metallographic studies confirmed an increase in the homogeneity of the dendritic structure in the weld zone due to the redistribution of heat input, as well as the absence of uneven grains and a decrease in the spread of grain sizes, which were in the range of 0.068–0.045 mm. The study resulted in determining the optimal range of technological parameters for the manufacture of flexible expansion elements to ensure their high operational properties.