Wei Zhang
Wei Zhang has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Guanghua Cheng
School of Artificial Intelligence, Optics and Electronics (iOPEN), Northwestern Polytechnical University, Xi’an 710072, China
3 shared publications - Guodong Zhang
Northwestern Polytechnical University
2 shared publications - Bowen Fan
School of Artificial Intelligence, Optics and Electronics (iOPEN), Northwestern Polytechnical University, Xi’an 710072, China
1 shared publication - Haisong Tang
College of Physics, Chengdu University of Technology, Chengdu 610059, China
1 shared publication - Huan Zhan
FSC Innovations (Chengdu) Optoelectronics Technology Co., Ltd., Chengdu 610299, China
1 shared publication - Jiang Wang
School of Artificial Intelligence, Optics and Electronics (iOPEN), Northwestern Polytechnical University, Xi’an 710072, China
1 shared publication
Latest Publications
- Open Access
Direct μJ-Level Femtosecond Laser Welding of Fused Silica to Titanium Foil Without Interlayer
Direct welding of fused silica to pure titanium (Ti) foil using conventional methods faces significant challenges, such as poor interfacial wettability, insufficient joint strength, and the need for interlayers or surface pretreatments. Existing femtosecond (fs) laser welding techniques for these materials often require high-energy millijoule (mJ)-level pulses or alloy interlayers. Moreover, reports on direct microjoule (μJ)-level fs laser welding of Ti foil to fused silica remain scarce. This study successfully demonstrates a direct welding process for pure Ti foil and fused silica using μJ-level fs laser pulses under ambient conditions, achieving joints with a maximum shear strength of 9.19 MPa. Microstructural analysis revealed an elemental interdiffusion region at the weld interface, supported by mechanical interlocking effects. X-ray photoelectron spectroscopy (XPS) confirmed the occurrence of interfacial chemical reactions, forming titanium silicide (TiSi2) and titanium oxide (TiO2). Additionally, a 24 h water immersion test of a square sealed cavity revealed outstanding hermeticity, with no water ingress. This work provides a simple, efficient, and robust solution for high-strength, additive-free bonding of fused silica to Ti foil under low-energy processing conditions.
Open AccessDirect μJ-Level Femtosecond Laser Welding of Fused Silica to Titanium Foil Without Interlayer
Direct welding of fused silica to pure titanium (Ti) foil using conventional methods faces significant challenges, such as poor interfacial wettability, insufficient joint strength, and the need for interlayers or surface pretreatments. Existing femtosecond (fs) laser welding techniques for these materials often require high-energy millijoule (mJ)-level pulses or alloy interlayers. Moreover, reports on direct microjoule (μJ)-level fs laser welding of Ti foil to fused silica remain scarce. This study successfully demonstrates a direct welding process for pure Ti foil and fused silica using μJ-level fs laser pulses under ambient conditions, achieving joints with a maximum shear strength of 9.19 MPa. Microstructural analysis revealed an elemental interdiffusion region at the weld interface, supported by mechanical interlocking effects. X-ray photoelectron spectroscopy (XPS) confirmed the occurrence of interfacial chemical reactions, forming titanium silicide (TiSi2) and titanium oxide (TiO2). Additionally, a 24 h water immersion test of a square sealed cavity revealed outstanding hermeticity, with no water ingress. This work provides a simple, efficient, and robust solution for high-strength, additive-free bonding of fused silica to Ti foil under low-energy processing conditions.
- Open Access
- 25 April 2026
- Published by MDPI AG in Nanomaterials
- Vol. 16 (9) , 519
Interpulse-Interval-Controlled Nanoparticle Formation in Gas-Phase Burst-Mode Femtosecond Laser Ablation
The formation and size evolution of gas-phase nanoparticles (NPs) in laser ablation inductively coupled plasma mass spectrometry critically influence aerosol transport, plasma ionization efficiency, and ultimately analytical accuracy. Nevertheless, burst-mode laser ablation, as an efficient and versatile strategy for controlling gas-phase NP size, remains insufficiently explored. Here, we combine experimental investigations and theoretical analysis to elucidate the mechanisms of gas-phase nanoparticle formation and size control by tuning the interpulse interval in burst-mode femtosecond (fs) laser ablation. The mean nanoparticle size exhibits a non-monotonic dependence on interpulse spacing, decreasing with a narrowing size distribution as the interval increases from 0 to 300 ps, and then increasing with distribution broadening at longer delays up to 1000 ps, closely correlating with ablation-crater depth. A characteristic transition at ~300 ps is identified, where both nanoparticle size and crater depth reach a minimum, revealing a critical timescale in pulse–plume–surface interactions. Simulations show that the interpulse interval governs the redistribution of laser energy between the surface and plume, driving a transition from surface-dominated ablation to plume-dominated absorption and partial recovery of surface coupling. This delay-dependent framework provides a unified explanation for nanoparticle formation, where particle size is determined by the competition between plume-mediated fragmentation and surface-driven material supply, and offers a basis for tailoring NP size distributions via temporal pulse shaping.
- 25 April 2026
- Published by MDPI AG in Nanomaterials
- Vol. 16 (9) , 519
Open AccessInterpulse-Interval-Controlled Nanoparticle Formation in Gas-Phase Burst-Mode Femtosecond Laser Ablation
The formation and size evolution of gas-phase nanoparticles (NPs) in laser ablation inductively coupled plasma mass spectrometry critically influence aerosol transport, plasma ionization efficiency, and ultimately analytical accuracy. Nevertheless, burst-mode laser ablation, as an efficient and versatile strategy for controlling gas-phase NP size, remains insufficiently explored. Here, we combine experimental investigations and theoretical analysis to elucidate the mechanisms of gas-phase nanoparticle formation and size control by tuning the interpulse interval in burst-mode femtosecond (fs) laser ablation. The mean nanoparticle size exhibits a non-monotonic dependence on interpulse spacing, decreasing with a narrowing size distribution as the interval increases from 0 to 300 ps, and then increasing with distribution broadening at longer delays up to 1000 ps, closely correlating with ablation-crater depth. A characteristic transition at ~300 ps is identified, where both nanoparticle size and crater depth reach a minimum, revealing a critical timescale in pulse–plume–surface interactions. Simulations show that the interpulse interval governs the redistribution of laser energy between the surface and plume, driving a transition from surface-dominated ablation to plume-dominated absorption and partial recovery of surface coupling. This delay-dependent framework provides a unified explanation for nanoparticle formation, where particle size is determined by the competition between plume-mediated fragmentation and surface-driven material supply, and offers a basis for tailoring NP size distributions via temporal pulse shaping.
- 1 January 2020
- Published by Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences in Chinese Optics
- Vol. 13 (6) , 1209-1223
Progress in ultrafast laser space-selective welding
The predecessor of China Optics was China Optics and Applied Optics Digest, which was founded in 1985. At that time, it was the only retrieval journal in the field of optics in China. At the end of 2008, China Optics and Applied Optics Digest was renamed 《中国光学》的前身是1985年创办的《中国光学与应用光学文摘》,当时是国内光学领域唯一的检索刊物。2008年底《中国光学与应用光学文摘》转型更名为《中国光学与应用光学》期刊,刊载内容突破了文摘的限制,正式成为学术刊物。
- 1 January 2020
- Published by Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences in Chinese Optics
- Vol. 13 (6) , 1209-1223
Progress in ultrafast laser space-selective welding
The predecessor of China Optics was China Optics and Applied Optics Digest, which was founded in 1985. At that time, it was the only retrieval journal in the field of optics in China. At the end of 2008, China Optics and Applied Optics Digest was renamed 《中国光学》的前身是1985年创办的《中国光学与应用光学文摘》,当时是国内光学领域唯一的检索刊物。2008年底《中国光学与应用光学文摘》转型更名为《中国光学与应用光学》期刊,刊载内容突破了文摘的限制,正式成为学术刊物。