Zhimin Sang
Zhimin Sang has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Gaohong Xu
School of Electrical and Information Engineering, Jiangsu University, Zhenjiang, China
2 shared publications - Qian Chen
Jiangsu University
2 shared publications - Wei Qian
Estun Automation Group, Nanjing, China
2 shared publications - Guohai Liu
Jiangsu University
1 shared publication - Hanghang Cong
School of Rail Transportation, Soochow University, Suzhou, China
1 shared publication - Hui Yang
College of Automation Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, China
1 shared publication
Latest Publications
- 13 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. PP (5) , 1
A Sliding-Mode based Model Predictive Control with Constrained Optimization for Surface-Mounted Permanent Magnet Synchronous Motors
Model predictive control (MPC) for three-phase for surface-mounted permanent magnet synchronous motors (SPMSMs) has been broadly researched due to its superior dynamic response and high efficacy in controlling nonlinear systems. However, MPC has high computational complexity, constraining its applications in scenarios with limited computational resources. Conventional MPC strategy evaluates eight cost functions to optimize voltage vectors (VVs) in one control period, where heavy computational burden is inevitable. This paper proposes a sliding-mode based model predictive control with constrained optimization strategy (SM-MPC) for PMSM. In the proposed strategy, VVs are pre-selected according to sliding-mode strategy. Initially, a pair of error quantification functions are derived to characterize the discrepancy observed between the reference current and the actual one. Subsequently, the proposed control strategy rigorously applies Lyapunov stability criterion to enforce asymptotic error convergence in current tracking, ensuring the output current precisely follows its reference, and then the qualified VVs can be selected. The proposed method demonstrates a 5us computational load reduction compared to conventional MPC. Moreover, SM-MPC achieves steady-state and dynamic performance metrics comparable to conventional MPC. Its efficacy is demonstrated through experimental results on a 0.5 kW PMSM drive setup.
- 13 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. PP (5) , 1
A Sliding-Mode based Model Predictive Control with Constrained Optimization for Surface-Mounted Permanent Magnet Synchronous Motors
Model predictive control (MPC) for three-phase for surface-mounted permanent magnet synchronous motors (SPMSMs) has been broadly researched due to its superior dynamic response and high efficacy in controlling nonlinear systems. However, MPC has high computational complexity, constraining its applications in scenarios with limited computational resources. Conventional MPC strategy evaluates eight cost functions to optimize voltage vectors (VVs) in one control period, where heavy computational burden is inevitable. This paper proposes a sliding-mode based model predictive control with constrained optimization strategy (SM-MPC) for PMSM. In the proposed strategy, VVs are pre-selected according to sliding-mode strategy. Initially, a pair of error quantification functions are derived to characterize the discrepancy observed between the reference current and the actual one. Subsequently, the proposed control strategy rigorously applies Lyapunov stability criterion to enforce asymptotic error convergence in current tracking, ensuring the output current precisely follows its reference, and then the qualified VVs can be selected. The proposed method demonstrates a 5us computational load reduction compared to conventional MPC. Moreover, SM-MPC achieves steady-state and dynamic performance metrics comparable to conventional MPC. Its efficacy is demonstrated through experimental results on a 0.5 kW PMSM drive setup.
- 24 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 10 (2) , 2858-2872
Simultaneous Suppression of Torque Pulsation and Electromagnetic Vibration of a Spoke-Type PM Motor by Space-Time Flux Density Harmonics Optimization
This paper presents an effective method to suppress torque pulsation and electromagnetic vibration. The key is to identify and suppress the space-time flux density harmonics that have a significant contribution to both torque pulsation and electromagnetic vibration. First, the mechanism of torque pulsation and electromagnetic vibration is investigated. Then, the contributions of different flux density harmonics are quantified considering the amplitude, phase, and space-time order. Meanwhile, the most critical flux density harmonics can be identified. Finally, a multi-objective optimization method combined with a symmetrically shaped rotor is used to optimize space-time flux density harmonic distribution. With the proposed method, a great improvement in torque and vibration performance of a 40-slot, 8-pole spoke-type permanent magnet motor is achieved. Furthermore, the method does not bring additional burden to manufacturing and does not increase material costs. Both the finite element model (FEM) and prototype results verify the effectiveness of the proposed method.
- 24 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 10 (2) , 2858-2872
Simultaneous Suppression of Torque Pulsation and Electromagnetic Vibration of a Spoke-Type PM Motor by Space-Time Flux Density Harmonics Optimization
This paper presents an effective method to suppress torque pulsation and electromagnetic vibration. The key is to identify and suppress the space-time flux density harmonics that have a significant contribution to both torque pulsation and electromagnetic vibration. First, the mechanism of torque pulsation and electromagnetic vibration is investigated. Then, the contributions of different flux density harmonics are quantified considering the amplitude, phase, and space-time order. Meanwhile, the most critical flux density harmonics can be identified. Finally, a multi-objective optimization method combined with a symmetrically shaped rotor is used to optimize space-time flux density harmonic distribution. With the proposed method, a great improvement in torque and vibration performance of a 40-slot, 8-pole spoke-type permanent magnet motor is achieved. Furthermore, the method does not bring additional burden to manufacturing and does not increase material costs. Both the finite element model (FEM) and prototype results verify the effectiveness of the proposed method.
- 7 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (7) , 6775-6786
Design and Analysis of a Novel Hybrid Rotor PM Machine Considering Negative Torque Ripple Contribution
This article proposes a novel hybrid rotor flux-switching permanent magnet (PM) machine with a low torque ripple. The rotor of this machine is composed of inverted T-shaped PMs and surface-mounted PMs and the rotor teeth of the inverted T-shaped PM and the surface-mounted PM are designed with a modified shape. Compared with the conventional inverted T-shaped PM machine, the hybrid PMs arrangement of the proposed machine introduces additional air-gap flux density time–space harmonics based on the flux modulation principle. Especially, these harmonics contribute to negative torque ripples and further counteract the positive torque ripple harmonics to suppress total torque ripples. Furthermore, the feasibility of the proposed machine is verified by comparing and analyzing the electromagnetic and mechanical performances of the conventional machine and the proposed one. Finally, a prototype was fabricated to verify the effectiveness of the proposed machine.
- 7 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (7) , 6775-6786
Design and Analysis of a Novel Hybrid Rotor PM Machine Considering Negative Torque Ripple Contribution
This article proposes a novel hybrid rotor flux-switching permanent magnet (PM) machine with a low torque ripple. The rotor of this machine is composed of inverted T-shaped PMs and surface-mounted PMs and the rotor teeth of the inverted T-shaped PM and the surface-mounted PM are designed with a modified shape. Compared with the conventional inverted T-shaped PM machine, the hybrid PMs arrangement of the proposed machine introduces additional air-gap flux density time–space harmonics based on the flux modulation principle. Especially, these harmonics contribute to negative torque ripples and further counteract the positive torque ripple harmonics to suppress total torque ripples. Furthermore, the feasibility of the proposed machine is verified by comparing and analyzing the electromagnetic and mechanical performances of the conventional machine and the proposed one. Finally, a prototype was fabricated to verify the effectiveness of the proposed machine.