Wei Qian
Research Subjects
Wei Qian has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Gaohong Xu
School of Electrical and Information Engineering, Jiangsu University, Zhenjiang, China
2 shared publications - Qian Chen
Jiangsu University
2 shared publications - Zhimin Sang
Estun Automation Group, Nanjing, China
2 shared publications - Bin Li
School of Electrical and Electronic Engineering, North China Electric Power University, Beijing 102206, China
1 shared publication - Guohai Liu
Jiangsu University
1 shared publication Jiawei Qiao
National Engineering Laboratory for Biomass Power Generation Equipment, North China Electric Power University, Beijing 102206, China
1 shared publication
Latest Publications
- 24 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 10 (2) , 2858-2872
Simultaneous Suppression of Torque Pulsation and Electromagnetic Vibration of a Spoke-Type PM Motor by Space-Time Flux Density Harmonics Optimization
This paper presents an effective method to suppress torque pulsation and electromagnetic vibration. The key is to identify and suppress the space-time flux density harmonics that have a significant contribution to both torque pulsation and electromagnetic vibration. First, the mechanism of torque pulsation and electromagnetic vibration is investigated. Then, the contributions of different flux density harmonics are quantified considering the amplitude, phase, and space-time order. Meanwhile, the most critical flux density harmonics can be identified. Finally, a multi-objective optimization method combined with a symmetrically shaped rotor is used to optimize space-time flux density harmonic distribution. With the proposed method, a great improvement in torque and vibration performance of a 40-slot, 8-pole spoke-type permanent magnet motor is achieved. Furthermore, the method does not bring additional burden to manufacturing and does not increase material costs. Both the finite element model (FEM) and prototype results verify the effectiveness of the proposed method.
- 24 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 10 (2) , 2858-2872
Simultaneous Suppression of Torque Pulsation and Electromagnetic Vibration of a Spoke-Type PM Motor by Space-Time Flux Density Harmonics Optimization
This paper presents an effective method to suppress torque pulsation and electromagnetic vibration. The key is to identify and suppress the space-time flux density harmonics that have a significant contribution to both torque pulsation and electromagnetic vibration. First, the mechanism of torque pulsation and electromagnetic vibration is investigated. Then, the contributions of different flux density harmonics are quantified considering the amplitude, phase, and space-time order. Meanwhile, the most critical flux density harmonics can be identified. Finally, a multi-objective optimization method combined with a symmetrically shaped rotor is used to optimize space-time flux density harmonic distribution. With the proposed method, a great improvement in torque and vibration performance of a 40-slot, 8-pole spoke-type permanent magnet motor is achieved. Furthermore, the method does not bring additional burden to manufacturing and does not increase material costs. Both the finite element model (FEM) and prototype results verify the effectiveness of the proposed method.
- 7 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (7) , 6775-6786
Design and Analysis of a Novel Hybrid Rotor PM Machine Considering Negative Torque Ripple Contribution
This article proposes a novel hybrid rotor flux-switching permanent magnet (PM) machine with a low torque ripple. The rotor of this machine is composed of inverted T-shaped PMs and surface-mounted PMs and the rotor teeth of the inverted T-shaped PM and the surface-mounted PM are designed with a modified shape. Compared with the conventional inverted T-shaped PM machine, the hybrid PMs arrangement of the proposed machine introduces additional air-gap flux density time–space harmonics based on the flux modulation principle. Especially, these harmonics contribute to negative torque ripples and further counteract the positive torque ripple harmonics to suppress total torque ripples. Furthermore, the feasibility of the proposed machine is verified by comparing and analyzing the electromagnetic and mechanical performances of the conventional machine and the proposed one. Finally, a prototype was fabricated to verify the effectiveness of the proposed machine.
- 7 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (7) , 6775-6786
Design and Analysis of a Novel Hybrid Rotor PM Machine Considering Negative Torque Ripple Contribution
This article proposes a novel hybrid rotor flux-switching permanent magnet (PM) machine with a low torque ripple. The rotor of this machine is composed of inverted T-shaped PMs and surface-mounted PMs and the rotor teeth of the inverted T-shaped PM and the surface-mounted PM are designed with a modified shape. Compared with the conventional inverted T-shaped PM machine, the hybrid PMs arrangement of the proposed machine introduces additional air-gap flux density time–space harmonics based on the flux modulation principle. Especially, these harmonics contribute to negative torque ripples and further counteract the positive torque ripple harmonics to suppress total torque ripples. Furthermore, the feasibility of the proposed machine is verified by comparing and analyzing the electromagnetic and mechanical performances of the conventional machine and the proposed one. Finally, a prototype was fabricated to verify the effectiveness of the proposed machine.
- Open Access
- 31 January 2022
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 341, 01026
Techno-economic analysis of 30MW biomass power plant modification for heating supply
Biomass combined heat and power (CHP) generation is the more efficient use of biomass compared the direct combustion power generation. The techno-economic analysis of 30 MW biomass direct combustion power set’s modification for heat supply is investigated in this work. Three schemes are employed to provide the district heating supply, including low vacuum condenser, steam extraction, and turbine bypass. The low vacuum condenser approach is the most promising based on the techno-economic analysis. The calculated outlet pressure of the steam turbine, the power generation capacity, the heating supply and the maximum heating area are 30KPa, 27MW, 143.58GJ/h, and 900,000 m2respectively. The expected annual income of biomass combined heat and power plants amounts up to 7,422,700 RMB.
- 31 January 2022
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 341, 01026
Open AccessTechno-economic analysis of 30MW biomass power plant modification for heating supply
Biomass combined heat and power (CHP) generation is the more efficient use of biomass compared the direct combustion power generation. The techno-economic analysis of 30 MW biomass direct combustion power set’s modification for heat supply is investigated in this work. Three schemes are employed to provide the district heating supply, including low vacuum condenser, steam extraction, and turbine bypass. The low vacuum condenser approach is the most promising based on the techno-economic analysis. The calculated outlet pressure of the steam turbine, the power generation capacity, the heating supply and the maximum heating area are 30KPa, 27MW, 143.58GJ/h, and 900,000 m2respectively. The expected annual income of biomass combined heat and power plants amounts up to 7,422,700 RMB.