Allen Paul David
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Allen Paul David has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Abdul Hadi Sulaiman
Universiti Tenaga Nasional
4 shared publications - Nelidya Md Yusoff
Universiti Teknologi Malaysia Kuala Lumpur
4 shared publications Airull Azizi Awang Lah
Malaysia Japan International Institute of Technology Universiti Teknologi Malaysia,Kuala Lumpur,Malaysia
3 shared publicationsHanun Enani Muhamad Aliza
Universiti Teknologi Malaysia,Razak Faculty of Technology and Informatics,Kuala Lumpur,Malaysia
3 shared publications- Aiman Ismail
Universiti Tenaga Nasional
2 shared publications - Fairuz Abdullah
Institute of Power Engineering, Universiti Tenaga Nasional, Kajang, Malaysia
2 shared publications
Latest Publications
- 22 August 2023
- Published by IOP Publishing in Physica Scripta
- Vol. 98 (9) , 095023
Effect of Rayleigh backscattering on the multiwavelength random fiber laser bandwidth
We investigated the effect of Rayleigh backscattering on the bandwidth of a multiwavelength random fiber laser (MWRFL). This MWRFL is based on an erbium-doped fiber amplifier (EDFA) as the gain medium and a Lyot filter as the wavelength-selective device. A high number and stable lasing line is generated with the assistance of a nonlinear polarization rotation effect induced by highly nonlinear fiber (HNLF) and optimized by a polarization controller. Longer single-mode fiber (SMF) produces wider multiwavelength bandwidth as compared to shorter SMF lengths, as 10 km, 3 km, and 0.1 km obtained 6.24 nm, 5.76 nm, and 2.75 nm wavelength bandwidth, respectively. When the SMF is removed from the setup, no Rayleigh backscattering is provided in the cavity, which led to a narrower multiwavelength bandwidth of 2.69 nm. Subsequently, the alteration of EDFA power, half-wave plate (HWP) angle, and quarter-wave plate (QWP) angles affected the degradation of multiwavelength performance. The best output spectrum is achieved at an EDFA power of 18 dBm, a HWP angle of 60°, and a QWP angle of 105°. The laser stability over a period of 120 min was excellent with a peak power deviation of 1.33 dB.
- 22 August 2023
- Published by IOP Publishing in Physica Scripta
- Vol. 98 (9) , 095023
Effect of Rayleigh backscattering on the multiwavelength random fiber laser bandwidth
We investigated the effect of Rayleigh backscattering on the bandwidth of a multiwavelength random fiber laser (MWRFL). This MWRFL is based on an erbium-doped fiber amplifier (EDFA) as the gain medium and a Lyot filter as the wavelength-selective device. A high number and stable lasing line is generated with the assistance of a nonlinear polarization rotation effect induced by highly nonlinear fiber (HNLF) and optimized by a polarization controller. Longer single-mode fiber (SMF) produces wider multiwavelength bandwidth as compared to shorter SMF lengths, as 10 km, 3 km, and 0.1 km obtained 6.24 nm, 5.76 nm, and 2.75 nm wavelength bandwidth, respectively. When the SMF is removed from the setup, no Rayleigh backscattering is provided in the cavity, which led to a narrower multiwavelength bandwidth of 2.69 nm. Subsequently, the alteration of EDFA power, half-wave plate (HWP) angle, and quarter-wave plate (QWP) angles affected the degradation of multiwavelength performance. The best output spectrum is achieved at an EDFA power of 18 dBm, a HWP angle of 60°, and a QWP angle of 105°. The laser stability over a period of 120 min was excellent with a peak power deviation of 1.33 dB.
- 15 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 410-414
Multiwavelength Random Fiber Laser based on Bidirectional SOA and Lyot filter
We investigated the performance of multiwavelength random fiber laser (MWRFL) using a bidirectional semiconductor optical amplifier (SOA) and Lyot filter inside a ring cavity. The bidirectional nature of linear SOA acts as the gain medium while the Lyot filter functions as the wavelength-selective device. The input SOA current, half-wave plate (HWP) angles of polarization controllers (PCs), and the stability of the laser were measured to determine the best optimized lasing line. The best MWRFL performance of 57 lasing lines within the 5 dB spectral range, 27.5 dB extinction ratio (ER), and 11.4 nm multiwavelength bandwidth are achieved through 550 mA of SOA current. The HWP angles of 90° and 120° for PC1 and PC2 respectively aid in the best polarization state of the output spectrum compared to other HWP angles measured at every interval of 30°. The laser had good stability with a maximum peak value deviation of 0.35 dBm at a wavelength range from 1541.0 nm to 1549.0 nm.
- 15 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 410-414
Multiwavelength Random Fiber Laser based on Bidirectional SOA and Lyot filter
We investigated the performance of multiwavelength random fiber laser (MWRFL) using a bidirectional semiconductor optical amplifier (SOA) and Lyot filter inside a ring cavity. The bidirectional nature of linear SOA acts as the gain medium while the Lyot filter functions as the wavelength-selective device. The input SOA current, half-wave plate (HWP) angles of polarization controllers (PCs), and the stability of the laser were measured to determine the best optimized lasing line. The best MWRFL performance of 57 lasing lines within the 5 dB spectral range, 27.5 dB extinction ratio (ER), and 11.4 nm multiwavelength bandwidth are achieved through 550 mA of SOA current. The HWP angles of 90° and 120° for PC1 and PC2 respectively aid in the best polarization state of the output spectrum compared to other HWP angles measured at every interval of 30°. The laser had good stability with a maximum peak value deviation of 0.35 dBm at a wavelength range from 1541.0 nm to 1549.0 nm.
- 15 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 415-419
Multiwavelength Random Fiber Laser Using Dual Bidirectional Semiconductor Optical Amplifiers and PMF-based Mach-Zehnder Interferometer
A multiwavelength random fiber laser (MWRFL) is successfully demonstrated for the first time from random distributed feedback generated by a spool of single-mode fiber (SMF) and using two semiconductor optical amplifiers (SOAs) in bidirectional configuration together with a Mach-Zehnder interferometer (MZI) based on polarization maintaining fiber (PMF) in a ring cavity. The generated MWRFL has an 80 mA lasing threshold with a slope efficiency of 1.24%. The lasing peak power is -19.1 dBm with an extinction ratio (ER) of 11.6 dB. The MWRFL produced 50 lasing lines within a lasing flatness of 3 dB bandwidth with a channel spacing of 0.22 nm. The MWRFL performance can be increased or decreased by tuning the polarization controller (PC) plate angle, resulting in a variation of the number of lasing lines and ER value. With proper PC plate tuning, the ER value can be increased by up to 61%. The MWRFL has high stability with peak power deviations of 1.2 dB and wavelength fluctuations of 0.4 nm in 120 minutes.
- 15 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 415-419
Multiwavelength Random Fiber Laser Using Dual Bidirectional Semiconductor Optical Amplifiers and PMF-based Mach-Zehnder Interferometer
A multiwavelength random fiber laser (MWRFL) is successfully demonstrated for the first time from random distributed feedback generated by a spool of single-mode fiber (SMF) and using two semiconductor optical amplifiers (SOAs) in bidirectional configuration together with a Mach-Zehnder interferometer (MZI) based on polarization maintaining fiber (PMF) in a ring cavity. The generated MWRFL has an 80 mA lasing threshold with a slope efficiency of 1.24%. The lasing peak power is -19.1 dBm with an extinction ratio (ER) of 11.6 dB. The MWRFL produced 50 lasing lines within a lasing flatness of 3 dB bandwidth with a channel spacing of 0.22 nm. The MWRFL performance can be increased or decreased by tuning the polarization controller (PC) plate angle, resulting in a variation of the number of lasing lines and ER value. With proper PC plate tuning, the ER value can be increased by up to 61%. The MWRFL has high stability with peak power deviations of 1.2 dB and wavelength fluctuations of 0.4 nm in 120 minutes.
- 15 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 425-428
Flatness Investigation of Multiwavelength SOA Random Fiber Laser Based on Sagnac Loop Mirror
We investigated the lasing performance of multiwavelength random fiber laser (MWRFL) at different single-mode fibers (SMFs). The main investigation is based on 700 m SMF with the presence of highly nonlinear fiber (HNLF) and polarizer as the current of the SOA is set to the maximum which is at 900 mA. With the assistance of the nonlinear polarization rotation (NPR) effect, two simultaneous multiwavelength spectra are generated, centered at 1575 nm and 1603 nm with multiwavelength bandwidth of 12 nm and 5 nm and 60 and 27 lines within 3 dB of bandwidth, respectively. The next investigations are based on 10 km and 300 m of SMF and without HNLF and polarizer from the setup, resulting in increased fluctuations and instability when a shorter 8-m of polarization-maintained fiber (PMF) is used. When the PMF length is changed to 42 m, the flatness is improved. The combination of specific fiber types with lengths such as SMF, PMF, and HNLF along with the polarizer influences the lasing lines and stability for the output of MWRFL.
- 15 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 425-428
Flatness Investigation of Multiwavelength SOA Random Fiber Laser Based on Sagnac Loop Mirror
We investigated the lasing performance of multiwavelength random fiber laser (MWRFL) at different single-mode fibers (SMFs). The main investigation is based on 700 m SMF with the presence of highly nonlinear fiber (HNLF) and polarizer as the current of the SOA is set to the maximum which is at 900 mA. With the assistance of the nonlinear polarization rotation (NPR) effect, two simultaneous multiwavelength spectra are generated, centered at 1575 nm and 1603 nm with multiwavelength bandwidth of 12 nm and 5 nm and 60 and 27 lines within 3 dB of bandwidth, respectively. The next investigations are based on 10 km and 300 m of SMF and without HNLF and polarizer from the setup, resulting in increased fluctuations and instability when a shorter 8-m of polarization-maintained fiber (PMF) is used. When the PMF length is changed to 42 m, the flatness is improved. The combination of specific fiber types with lengths such as SMF, PMF, and HNLF along with the polarizer influences the lasing lines and stability for the output of MWRFL.