Emy Zairah Ahmad
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Emy Zairah Ahmad has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Mohamad Fani Sulaima
Faculty of Electrical Technology and Engineering, Universiti Teknikal Malaysia Melaka, Melaka, Malaysia
2 shared publications - Mohamad Naim Mohd Nasir
Fakulti Teknologi dan Kejuruteraan Elektrik, Universiti Teknikal Malaysia Melaka, Melaka, Malaysia
2 shared publications - Zul Hasrizal Bohari
Faculty of Electrical Technology and Engineering Universiti Teknikal Malaysia Melaka Hang Tuah Jaya Durian Tunggal 76100 Melaka Malaysia
2 shared publications - Ahmad Zaidi Abdullah
Faculty of Electrical Engineering & Technology, 02600 Arau Universiti Malaysia Perlis, Malaysia
1 shared publication - Ayob Nazmy Nanyan
Faculty of Electrical Engineering & Technology, Universiti Malaysia Perlis
1 shared publication - Faizah Abu Bakar
Universiti Malaysia Perlis (UniMAP)
1 shared publication
Latest Publications
- Open Access
- 30 November 2024
- Published by Akademia Baru Publishing in Journal of Advanced Research in Micro and Nano Engineering
- Vol. 26 (1) , 54-65
Comparative Analysis of Mechanical Response in Epoxy Nanocomposites Reinforced with MXene and Other Carbon-Based Nano-Fillers: An Experimental and Numerical Study
This research introduces a finite element model tailored explicitly to assess the mechanical characteristics inherent in MXene/polymer nanocomposite. The primary focus revolves around elucidating the performance attributes through numerical simulations and subsequently aligning these findings with experimental data. The numerical analysis not only predicts mechanical behaviours but also aims to correlate these insights with experimental results obtained from fabricated epoxy nanocomposites within the study's scope. By employing this simulation-driven approach, the study investigates a deeper understanding of the mechanical response, particularly focusing on the materials' tensile properties. From the experimental results, the MXene/epoxy nanocomposite sample exhibited the highest tensile strength and modulus, measuring 50.1 MPa and 7.13 GPa, respectively. The simulation results were 50.08 MPa and 6.95 GPa, showing a difference of less than 3%. Small discrepancies in Young's modulus between the experimental and simulation results may arise from inherent sample heterogeneity. This heterogeneity, which includes microstructural variations, impurities, or defects, contrasts with the idealized homogeneous structures assumed in simulations. This research endeavours to advance predictive modelling techniques, offering valuable insights that can potentially streamline the manufacturing process and optimize MXene-based polymer composites. The goal is to tailor these materials with precise mechanical properties, ensuring their enhanced performance in various applications.
- 30 November 2024
- Published by Akademia Baru Publishing in Journal of Advanced Research in Micro and Nano Engineering
- Vol. 26 (1) , 54-65
Open AccessComparative Analysis of Mechanical Response in Epoxy Nanocomposites Reinforced with MXene and Other Carbon-Based Nano-Fillers: An Experimental and Numerical Study
This research introduces a finite element model tailored explicitly to assess the mechanical characteristics inherent in MXene/polymer nanocomposite. The primary focus revolves around elucidating the performance attributes through numerical simulations and subsequently aligning these findings with experimental data. The numerical analysis not only predicts mechanical behaviours but also aims to correlate these insights with experimental results obtained from fabricated epoxy nanocomposites within the study's scope. By employing this simulation-driven approach, the study investigates a deeper understanding of the mechanical response, particularly focusing on the materials' tensile properties. From the experimental results, the MXene/epoxy nanocomposite sample exhibited the highest tensile strength and modulus, measuring 50.1 MPa and 7.13 GPa, respectively. The simulation results were 50.08 MPa and 6.95 GPa, showing a difference of less than 3%. Small discrepancies in Young's modulus between the experimental and simulation results may arise from inherent sample heterogeneity. This heterogeneity, which includes microstructural variations, impurities, or defects, contrasts with the idealized homogeneous structures assumed in simulations. This research endeavours to advance predictive modelling techniques, offering valuable insights that can potentially streamline the manufacturing process and optimize MXene-based polymer composites. The goal is to tailor these materials with precise mechanical properties, ensuring their enhanced performance in various applications.
- Open Access
- 30 September 2024
- Published by Akademia Baru Publishing in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
- Vol. 121 (2) , 106-131
Integrating Micro-Hydro and Solar PV in Rainwater Harvesting: A Hybrid Generation Approach
As the scarcity of water worsens and the frequency of severe weather increases, the efficient harvesting of rainwater becomes more critical. Despite its potential to conserve water and mitigate flooding, the integration of rainwater harvesting with solar PV and micro-hydro technologies remains underutilized in renewable energy production. A significant barrier to widespread adoption is the challenge of accurately quantifying energy generation and optimizing management practices. This project aims to address these issues by proposing a method to develop a rainwater harvesting system that integrates solar PV and micro-hydro technologies. The primary objective is to evaluate the practical performance of this hybrid system in driving applications such as irrigation and sanitation. The findings demonstrate that the integrated system outperforms conventional methods, suggesting its effectiveness in rainwater utilization as a renewable energy resource.
- 30 September 2024
- Published by Akademia Baru Publishing in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
- Vol. 121 (2) , 106-131
Open AccessIntegrating Micro-Hydro and Solar PV in Rainwater Harvesting: A Hybrid Generation Approach
As the scarcity of water worsens and the frequency of severe weather increases, the efficient harvesting of rainwater becomes more critical. Despite its potential to conserve water and mitigate flooding, the integration of rainwater harvesting with solar PV and micro-hydro technologies remains underutilized in renewable energy production. A significant barrier to widespread adoption is the challenge of accurately quantifying energy generation and optimizing management practices. This project aims to address these issues by proposing a method to develop a rainwater harvesting system that integrates solar PV and micro-hydro technologies. The primary objective is to evaluate the practical performance of this hybrid system in driving applications such as irrigation and sanitation. The findings demonstrate that the integrated system outperforms conventional methods, suggesting its effectiveness in rainwater utilization as a renewable energy resource.
- Open Access
- 17 May 2024
- Published by Akademia Baru Publishing in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
- Vol. 117 (1) , 132-142
Reliability Study of Ultra Z-Blade Water Turbine for Pico-Hydro System with Low Head and Low Flow Water Resources
The term "pico-hydro" refers to hydropower that has an output of no more than 5 kW. This method has an advantage over large-scale hydropower systems in that it can extract electrical energy sources from even a small stream of water. It is interesting to note that there is not yet a hydro reaction type water turbine that has been developed commercially and is suitable for usage in low-head and low-flow places. In this work, an Ultra Z-Blade reaction type turbine is used to introduce a pico-hydro system, and the critical design parameters are demonstrated through an exploratory method (U-ZBT). For both ideal and real-world scenarios, numerical simulations and their solutions are described here. The development of the equations uses the ideas of mass, momentum, and energy conservation. The output power (W), rotor angular speed (ω), turbine radius (R), and torque (T) can all be specified. An instrumentation diagram that was utilized during the testing of the U-ZBT prototype is included in the documentation to help explain the experimental techniques. Both the mathematical model and the experimental findings have shown that the U-ZBT has a higher level of performance at operational water heads as low as 5m and ultra-low mass flow rates as low as 1.77 L/sec. In addition to this, it can achieve rotational speeds of up to 130 rpm, has a high efficiency of 66 %, and is capable of producing high mechanical power of roughly 60 watts.
- 17 May 2024
- Published by Akademia Baru Publishing in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
- Vol. 117 (1) , 132-142
Open AccessReliability Study of Ultra Z-Blade Water Turbine for Pico-Hydro System with Low Head and Low Flow Water Resources
The term "pico-hydro" refers to hydropower that has an output of no more than 5 kW. This method has an advantage over large-scale hydropower systems in that it can extract electrical energy sources from even a small stream of water. It is interesting to note that there is not yet a hydro reaction type water turbine that has been developed commercially and is suitable for usage in low-head and low-flow places. In this work, an Ultra Z-Blade reaction type turbine is used to introduce a pico-hydro system, and the critical design parameters are demonstrated through an exploratory method (U-ZBT). For both ideal and real-world scenarios, numerical simulations and their solutions are described here. The development of the equations uses the ideas of mass, momentum, and energy conservation. The output power (W), rotor angular speed (ω), turbine radius (R), and torque (T) can all be specified. An instrumentation diagram that was utilized during the testing of the U-ZBT prototype is included in the documentation to help explain the experimental techniques. Both the mathematical model and the experimental findings have shown that the U-ZBT has a higher level of performance at operational water heads as low as 5m and ultra-low mass flow rates as low as 1.77 L/sec. In addition to this, it can achieve rotational speeds of up to 130 rpm, has a high efficiency of 66 %, and is capable of producing high mechanical power of roughly 60 watts.
- Open Access
- 31 July 2023
- Published by Akademia Baru Publishing in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
- Vol. 107 (1) , 58-79
A Contemporary Review of High Voltage Partial Discharge Detection and Recognition Techniques
This review article provides a summary of the most advanced approaches and advancements in the detection and recognition of high voltage partial discharge (PD). It discusses numerous detecting technologies, such as electrical, acoustic, and optical approaches, as well as their merits and disadvantages. It also discusses current developments in signal processing and pattern recognition algorithms used for PD detection and classification. Lastly, the study covers the challenges and limitations in high voltage PD detection and identification studies, as well as potential future solutions.
- 31 July 2023
- Published by Akademia Baru Publishing in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
- Vol. 107 (1) , 58-79
Open AccessA Contemporary Review of High Voltage Partial Discharge Detection and Recognition Techniques
This review article provides a summary of the most advanced approaches and advancements in the detection and recognition of high voltage partial discharge (PD). It discusses numerous detecting technologies, such as electrical, acoustic, and optical approaches, as well as their merits and disadvantages. It also discusses current developments in signal processing and pattern recognition algorithms used for PD detection and classification. Lastly, the study covers the challenges and limitations in high voltage PD detection and identification studies, as well as potential future solutions.