Yuda Apri Hermawan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yuda Apri Hermawan has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- I. Ketut Aria Pria Utama
Department of Naval Architecture, Faculty of Marine Technology, Institut Teknologi Sepuluh Nopember (ITS), Surabaya 60111, Indonesia
2 shared publications Totok Yulianto
Departement of Naval Architecture, Faculty of Marine Technology, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia
2 shared publicationsAdi Novitarini Putri
Departement of Naval Architecture, Faculty of Marine Technology, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia
1 shared publication- Ahmad Nasirudin
Inst Teknol Sepuluh Nopember, Dept Naval Architecture, Surabaya, Indonesia
1 shared publication Dedi Budi Purwanto
Department of Naval Architecture, Faculty of Marine Technology, Institut Teknologi Sepuluh Nopember
1 shared publication- Erlangga Zuhdi Aulia Rijal
Institut Teknologi Sepuluh Nopember
1 shared publication
Latest Publications
- Open Access
- 12 March 2026
- Published by MDPI AG in Engineering Proceedings
- Vol. 128 (1) , 27
Three-Dimensional Simulation Framework of a Vision-Based Autonomous System for Unmanned Underwater Vehicle
In training vision-based autonomous system algorithms, simulation plays a pivotal role in enhancing and expediting system recognition and development. However, creating a realistic virtual underwater environment is particularly difficult. To address the need for advanced control system modeling, we developed an integrated simulation framework that combines a 3D computer graphics engine, Unreal Engine, with Simulink. This integration facilitates the design and visualization of complex control systems. The framework was evaluated using an autonomous system tasked with tracking underwater cables, employing YOLO-based object detection for visual guidance. The results demonstrate the effectiveness of the proposed simulation environment in accurately replicating the behavior of vision-based autonomous systems operating in underwater conditions.
- 12 March 2026
- Published by MDPI AG in Engineering Proceedings
- Vol. 128 (1) , 27
Open AccessThree-Dimensional Simulation Framework of a Vision-Based Autonomous System for Unmanned Underwater Vehicle
In training vision-based autonomous system algorithms, simulation plays a pivotal role in enhancing and expediting system recognition and development. However, creating a realistic virtual underwater environment is particularly difficult. To address the need for advanced control system modeling, we developed an integrated simulation framework that combines a 3D computer graphics engine, Unreal Engine, with Simulink. This integration facilitates the design and visualization of complex control systems. The framework was evaluated using an autonomous system tasked with tracking underwater cables, employing YOLO-based object detection for visual guidance. The results demonstrate the effectiveness of the proposed simulation environment in accurately replicating the behavior of vision-based autonomous systems operating in underwater conditions.
- Open Access
- 1 February 2026
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1585 (1)
Trajectory Guidance Design on Ship with Weather Condition Data Integration
In recent years, the increasing number of ships visited in congested port, resulting ship navigation channels to being experience a higher traffic density, posing the challenging for port operation and marine safety. The congestion in ships approaching navigation channel leads to potentially causing delay, operation inefficiencies, and even rising the risk of marine accident in channels i.e. collision or grounding. This study aims to design a trajectory guidance system to enhance ship safety during navigation, particularly when entering port areas. According to data from the National Transportation Safety Committee (KNKT), there have been several ship accidents with high numbers of fatalities, such as collisions, groundings, and sinkings, especially in shipping areas around ports with limited channel widths, many anchored ships, and restricted maneuvring space. This study employs a numerical simulation methods involving the MMG (Maneuvring Modeling Group) ship dynamics model and integrates real-time weather conditions as primary parameters in ship maneuver (ship speed, heading angle, and rudder angle) and trajectory recommendations. The simulation is conducted by using largest ship and the ship with the highest frequency visit in Tanjung Perak Port navigation channel as case studi while the realtime weather data is also taken into account. The simulation shows that the trajectory guidance poses the ship to be keep on the track of the navigation channel even though it is under weather conditions. This guidance can be used for helping captains to reduce the risk of accidents in narrow shipping lanes, and improves operational safety as well as supports a sustainable and efficient shipping industry.
- 1 February 2026
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1585 (1)
Open AccessTrajectory Guidance Design on Ship with Weather Condition Data Integration
In recent years, the increasing number of ships visited in congested port, resulting ship navigation channels to being experience a higher traffic density, posing the challenging for port operation and marine safety. The congestion in ships approaching navigation channel leads to potentially causing delay, operation inefficiencies, and even rising the risk of marine accident in channels i.e. collision or grounding. This study aims to design a trajectory guidance system to enhance ship safety during navigation, particularly when entering port areas. According to data from the National Transportation Safety Committee (KNKT), there have been several ship accidents with high numbers of fatalities, such as collisions, groundings, and sinkings, especially in shipping areas around ports with limited channel widths, many anchored ships, and restricted maneuvring space. This study employs a numerical simulation methods involving the MMG (Maneuvring Modeling Group) ship dynamics model and integrates real-time weather conditions as primary parameters in ship maneuver (ship speed, heading angle, and rudder angle) and trajectory recommendations. The simulation is conducted by using largest ship and the ship with the highest frequency visit in Tanjung Perak Port navigation channel as case studi while the realtime weather data is also taken into account. The simulation shows that the trajectory guidance poses the ship to be keep on the track of the navigation channel even though it is under weather conditions. This guidance can be used for helping captains to reduce the risk of accidents in narrow shipping lanes, and improves operational safety as well as supports a sustainable and efficient shipping industry.
- Open Access
- 1 February 2026
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1585 (1)
Design of an Automated Obstacle Detection System for Collision Early Warning on a Small Fishing Vessel
Indonesia has a high potency for fisheries commodities, produced by not only large and medium sized fishing vessels, but also traditional and small fishing vessels. Most traditional and small fishing vessels are not equipped with adequate navigation tools, although the wider range navigation devices are not a mandatory for small fising vessel, remaining the increasing an accident risk. The National Transportation Safety Committee of Indonesia (KNKT) reported approximately 31% of ship accidents occur on fishing vessel from 2018 to 2020, with around 342 people missing and dying in such accidents, including ship collision accidents. To address that issue, this study developes a deep learning-based obstacle detection system to improve the safety of traditional and small fishing vessels, which are often involved in maritime accidents. In this study, YOLOv8 algorithm is used to detect four types of obstacle objects: fishing vessels, tugboats, dredging vessels, and cargo ships which are assumed to be a common involved collided ship againts the small fishing vessels. The obstacle detection system is then embedded into a single board computer unit as central processing unit for collision detection. The best object detection training model was produced after 120 iterations, showing a high level of accuracy with a precision of 87.1% and a recall of 81.6%. This system is firstly tested by using a recorded video representing a video-captured an onboard camera, continuing with a direct testing on a small fishing vessel. Both implementations confirm that this system can be used for detecting an obstacle in front of the vessels as well as provides early warning to prevent a collision. By applying this system as a collision early warning system on a small fising vessel, this system is expected to overcome real-world needs in reducing the risk of fishing vessel casualties, enhancing maritime safety, and supporting the digital transformation of the national fisheries sector.
- 1 February 2026
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1585 (1)
Open AccessDesign of an Automated Obstacle Detection System for Collision Early Warning on a Small Fishing Vessel
Indonesia has a high potency for fisheries commodities, produced by not only large and medium sized fishing vessels, but also traditional and small fishing vessels. Most traditional and small fishing vessels are not equipped with adequate navigation tools, although the wider range navigation devices are not a mandatory for small fising vessel, remaining the increasing an accident risk. The National Transportation Safety Committee of Indonesia (KNKT) reported approximately 31% of ship accidents occur on fishing vessel from 2018 to 2020, with around 342 people missing and dying in such accidents, including ship collision accidents. To address that issue, this study developes a deep learning-based obstacle detection system to improve the safety of traditional and small fishing vessels, which are often involved in maritime accidents. In this study, YOLOv8 algorithm is used to detect four types of obstacle objects: fishing vessels, tugboats, dredging vessels, and cargo ships which are assumed to be a common involved collided ship againts the small fishing vessels. The obstacle detection system is then embedded into a single board computer unit as central processing unit for collision detection. The best object detection training model was produced after 120 iterations, showing a high level of accuracy with a precision of 87.1% and a recall of 81.6%. This system is firstly tested by using a recorded video representing a video-captured an onboard camera, continuing with a direct testing on a small fishing vessel. Both implementations confirm that this system can be used for detecting an obstacle in front of the vessels as well as provides early warning to prevent a collision. By applying this system as a collision early warning system on a small fising vessel, this system is expected to overcome real-world needs in reducing the risk of fishing vessel casualties, enhancing maritime safety, and supporting the digital transformation of the national fisheries sector.
- 22 September 2024
- Published by Springer Nature
- p. 125-133
Framework Design for an Early Warning System to Prevent Ship Collisions
- 22 September 2024
- Published by Springer Nature
- p. 125-133
Framework Design for an Early Warning System to Prevent Ship Collisions
- 3 August 2024
- Published by Springer Nature
- p. 163-169
Review of the Use of Wind and Solar Energy for Powering Small- and Medium-Sized Vessels, the Case of Indonesia
- 3 August 2024
- Published by Springer Nature
- p. 163-169
Review of the Use of Wind and Solar Energy for Powering Small- and Medium-Sized Vessels, the Case of Indonesia
- 16 July 2024
- Published by Springer Nature
- p. 355-366
Preliminary Development of a Software for Ship Maneuvering Ability Prediction
- 16 July 2024
- Published by Springer Nature
- p. 355-366
Preliminary Development of a Software for Ship Maneuvering Ability Prediction
- Open Access
- 1 May 2023
- Published by Lembaga Penelitian dan Pengabdian kepada Masyarakat ITS in International Journal of Offshore and Coastal Engineeing
- Vol. 7 (1) , 36-43
A Modest Numerical Simulation for Automatic Ship Collision Avoidance System to Support Green and Autonomous Shipping Concept
The development of autonomous ship is being pursued massively and significantly, either industrially, regulatory, or academic. The autonomous ship is considered to be able to significantly reduce challenges caused by unexpected errors of manual navigation (manned ship). One of the challenges for autonomous ship development is constructing an automatic ship collision avoidance system as a basic system for identifying and avoiding an obstacle object around the ship. The collision avoidance system must consider not only the position of the ship and the obstacle but also the maneuvering characteristic (ship dynamics) and control system of the ship, thereby making its numerical system more complex. This research presents a modest numerical simulation for designing an automatic ship collision avoidance system. However, the numerical model still considers the main necessary elements of the system. The numerical model includes a set of automatic guidance system, collision avoidance system, ship dynamics, and control system. Head on head, overtaking, and crossing collision scenarios are performed to investigate the numerical model. The simulation results show that the modest numerical simulation can be used to perform an automatic ship collision avoidance system in which the ship can automatically avoid a target ship considered as the ship’s obstacle in those three collision scenarios.
- 1 May 2023
- Published by Lembaga Penelitian dan Pengabdian kepada Masyarakat ITS in International Journal of Offshore and Coastal Engineeing
- Vol. 7 (1) , 36-43
Open AccessA Modest Numerical Simulation for Automatic Ship Collision Avoidance System to Support Green and Autonomous Shipping Concept
The development of autonomous ship is being pursued massively and significantly, either industrially, regulatory, or academic. The autonomous ship is considered to be able to significantly reduce challenges caused by unexpected errors of manual navigation (manned ship). One of the challenges for autonomous ship development is constructing an automatic ship collision avoidance system as a basic system for identifying and avoiding an obstacle object around the ship. The collision avoidance system must consider not only the position of the ship and the obstacle but also the maneuvering characteristic (ship dynamics) and control system of the ship, thereby making its numerical system more complex. This research presents a modest numerical simulation for designing an automatic ship collision avoidance system. However, the numerical model still considers the main necessary elements of the system. The numerical model includes a set of automatic guidance system, collision avoidance system, ship dynamics, and control system. Head on head, overtaking, and crossing collision scenarios are performed to investigate the numerical model. The simulation results show that the modest numerical simulation can be used to perform an automatic ship collision avoidance system in which the ship can automatically avoid a target ship considered as the ship’s obstacle in those three collision scenarios.
- Open Access
- 11 January 2022
- Published by Akademia Baru Publishing in CFD Letters
- Vol. 14 (1) , 87-98
Resistance Analysis of a Hydrofoil Supported Watercraft (Hysuwac): A Case Study
Energy efficiency and environmental sustainability are important aspects in ship design and operation. Hull-shape optimization, hull cleaning and coating, and the use of appendages are, among others, well-known efforts to reduce ship fuel consumption. Regarding energy efficiency and environmental sustainability, it is possible to effectively reduce the resistance of an existing catamaran by retrofitting a foil system to it. In this study, a foil system is designed and retrofitted to a catamaran to reduce its total resistance. Reynolds-averaged Navier-Stokes simulations, utilizing k-w SST turbulence model, were performed to study the effects of the foil system on the vessel’s total resistance. Free surface effects were modelled, i.e., the generation of waves due to the vessel’s movement on the water surface. The foil system affects the wetted surface area, running sinkage and trim, and the wave pattern generated by the vessel, which ultimately affect the vessel’s total resistance. At relatively low speeds (Fr < 0.7), an increase of the total resistance, reaching a value of approximately 11%, was observed due to the foil system. However, at higher speeds (Fr > 0.7), the foil system decreases the total resistance, reaching a value of approximately 32% at the service speed (Fr = 1.24). The 32% resistance reduction at the service speed is promising in view of the intended purpose of the foil system as an energy saving device.
- 11 January 2022
- Published by Akademia Baru Publishing in CFD Letters
- Vol. 14 (1) , 87-98
Open AccessResistance Analysis of a Hydrofoil Supported Watercraft (Hysuwac): A Case Study
Energy efficiency and environmental sustainability are important aspects in ship design and operation. Hull-shape optimization, hull cleaning and coating, and the use of appendages are, among others, well-known efforts to reduce ship fuel consumption. Regarding energy efficiency and environmental sustainability, it is possible to effectively reduce the resistance of an existing catamaran by retrofitting a foil system to it. In this study, a foil system is designed and retrofitted to a catamaran to reduce its total resistance. Reynolds-averaged Navier-Stokes simulations, utilizing k-w SST turbulence model, were performed to study the effects of the foil system on the vessel’s total resistance. Free surface effects were modelled, i.e., the generation of waves due to the vessel’s movement on the water surface. The foil system affects the wetted surface area, running sinkage and trim, and the wave pattern generated by the vessel, which ultimately affect the vessel’s total resistance. At relatively low speeds (Fr < 0.7), an increase of the total resistance, reaching a value of approximately 11%, was observed due to the foil system. However, at higher speeds (Fr > 0.7), the foil system decreases the total resistance, reaching a value of approximately 32% at the service speed (Fr = 1.24). The 32% resistance reduction at the service speed is promising in view of the intended purpose of the foil system as an energy saving device.