Calvin Chan
Research Subjects
Calvin Chan has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
Annelisse Cuellar-Montes
TRIA/University of Minnesota/Gillette Childrens
2 shared publicationsDavid Baird
TRIA/University of Minnesota/Gillette Childrens
2 shared publications- Henry Bone Ellis
Scottish Rite for Children, Dallas, TX, USA
2 shared publications - João Victor Novaretti
Department of Orthopaedics and Traumatology, Orthopaedics and Traumatology Sports Center (CETE), Paulista School of Medicine (EPM), Federal University of São Paulo, São Paulo, Brazil
2 shared publications - Kevin G. Shea
Pediatric Orthopaedic Surgery, Stanford University, Stanford, California, USA
2 shared publications - Marc Elliot Levenston
Department of Mechanical Engineering, Stanford University, Stanford, CA 94305, USA
2 shared publications
Latest Publications
- 1 February 2024
- Published by SAGE Publications in Tissue Engineering Part A
- Vol. 30 (3-4) , 107-114
Scaffold-Free Bone Marrow-Derived Mesenchymal Stem Cell Sheets Enhance Bone Formation in a Weight-Bearing Rat Critical Bone Defect Model
Researchers have been exploring alternative methods for bone tissue engineering, as current management of large bone defects may be a significant challenge for both patient and surgeon with conventional surgical treatments leading to high complication and revision rates. Recent studies have shown mesenchymal stem cell sheets may enhance bone regeneration in different animal models. We investigated the efficacy of implanted scaffold-free bone marrow-derived mesenchymal stem cell (BMSC) sheets on bone regeneration of a critical bone defect in a weight-bearing rat model. BMSCs were isolated from the femora of male Sprague-Dawley rats aged 5-6 weeks and cell sheets were produced on temperature-responsive culture dishes. Nine male Sprague-Dawley rats aged 6-8 weeks were utilized. A bilateral femoral critical bone defect was created with a bridge plate serving as internal fixation. One side was randomly selected and BMSC sheets were implanted into the bone defect (BMSC group), with the contralateral side receiving no treatment (control). Rats were anesthetized and radiographs were performed at 2-week intervals. At the 8-week timepoint, rats were euthanized, femurs harvested and micro-CT and histologic analysis was performed. We found a statistically significant increase in new bone formation and bone volume fraction compared to the control. Histomorphometry analysis revealed a larger percent of newly formed bone and a higher total histologic score. Our results suggest scaffold-free BMSC sheets may be used in the management of large weight-bearing bone defects to complement a different surgical technique or as a standalone approach followed by internal fixation. However further research is still needed.
- 1 February 2024
- Published by SAGE Publications in Tissue Engineering Part A
- Vol. 30 (3-4) , 107-114
Scaffold-Free Bone Marrow-Derived Mesenchymal Stem Cell Sheets Enhance Bone Formation in a Weight-Bearing Rat Critical Bone Defect Model
Researchers have been exploring alternative methods for bone tissue engineering, as current management of large bone defects may be a significant challenge for both patient and surgeon with conventional surgical treatments leading to high complication and revision rates. Recent studies have shown mesenchymal stem cell sheets may enhance bone regeneration in different animal models. We investigated the efficacy of implanted scaffold-free bone marrow-derived mesenchymal stem cell (BMSC) sheets on bone regeneration of a critical bone defect in a weight-bearing rat model. BMSCs were isolated from the femora of male Sprague-Dawley rats aged 5-6 weeks and cell sheets were produced on temperature-responsive culture dishes. Nine male Sprague-Dawley rats aged 6-8 weeks were utilized. A bilateral femoral critical bone defect was created with a bridge plate serving as internal fixation. One side was randomly selected and BMSC sheets were implanted into the bone defect (BMSC group), with the contralateral side receiving no treatment (control). Rats were anesthetized and radiographs were performed at 2-week intervals. At the 8-week timepoint, rats were euthanized, femurs harvested and micro-CT and histologic analysis was performed. We found a statistically significant increase in new bone formation and bone volume fraction compared to the control. Histomorphometry analysis revealed a larger percent of newly formed bone and a higher total histologic score. Our results suggest scaffold-free BMSC sheets may be used in the management of large weight-bearing bone defects to complement a different surgical technique or as a standalone approach followed by internal fixation. However further research is still needed.
- Open Access
- 1 July 2023
- Published by SAGE Publications in Orthopaedic Journal of Sports Medicine
- Vol. 11 (7_suppl3)
Poster 123: Biomechanical Comparison of Four All-inside Meniscus-Based Repairs to Radial Tears of Human Cadaveric Lateral Menisci
Objectives: Meniscal injuries are among the most common orthopedic injuries in the United States. Radial meniscus tears were historically treated with partial meniscectomy, often leading to poor outcomes. Radial tear repair preserves meniscal tissue, may delay knee degeneration, and leads to better long-term outcomes. Repair techniques for radial tears vary and should be evaluated for differences in biomechanical properties and failure mechanisms. All-inside, meniscus-based suture repairs have shorter operating times, minimize risk of nerve injury, and are increasingly possible with novel devices. Our objective was to evaluate the strength based on load-to-failure of four all-inside meniscus-based repair techniques for radial tears in human cadaveric lateral menisci. We chose two techniques that bridged the tear directly – the Double Vertical (DV, Figure 1) and Double Vertical Cross (DVX, Figure 2). We chose two other techniques that added horizontal reinforcing stitches to engage the bridging stitches – the All-inside Rebar (AR, Figure 3) and our novel Oblique Box (OB, Figure 4). We hypothesized that AR and OB would have higher load to failure than DV and DVX. Methods: 36 fresh-frozen human adult lateral menisci were randomized into four groups of nine. Dissection, repair, and testing were completed one meniscus at a time to minimize the time period from thawing to testing. Each meniscus was dissected from its tibial bone block, and a complete radial tear was created at the midbody of the meniscus. Suture repairs were performed using 2-0 braided suture and a straight needle. Menisci were repaired using the DV, DVX, AR, and OB techniques with meniscus- based suturing to simulate the all-inside, meniscus-based approach. All suture dimensions were standardized as indicated on Figures 1-4, and all knots were tied on the superior surface of the menisci. The suture patterns for all repair types used loops that passed above the superior and below the inferior surfaces of the meniscus. The DV repair used two sutures in loops perpendicular to the tear. DVX used two sutures in loops that crossed over the tear. AR used two sutures in loops parallel to the tear acting as reinforcing rebar and two bridging sutures perpendicular to the tear and outside the rebar sutures. OB used two sutures to create a trapezoidal reinforcing box on either side of the tear and two bridging sutures in loops perpendicular to the tear and inside the box. The repaired menisci were loaded on an Instron 5944 test frame with 2 kN load cell using custom clamps. They underwent cyclic loading of 5-30 N for 500 cycles at 10 mm/min, a 30-minute resting period, and a single trial of load-to-failure at 10 mm/min. The ultimate load at failure was analyzed via one-way ANOVA with Tukey’s test for pairwise comparisons and significance set at p<0.05. Results: Failure occurred due to suture cutout in all specimens. Repair constructs that lacked a reinforcing-type suture (DV and DVX) cut through or “cheese-wired” at lower loads than repairs with reinforcing sutures (AR and OB). Mean ± standard deviation ultimate load values for each repair group were 60 N ± 24.5 for DV, 58 N ± 17.4 for DVX, 168 N ± 33.9 for AR, and 105 N ± 9.0 for OB. The ultimate load for all repair techniques were significantly different from each other by Tukey’s test with the exception of the DV and DVX comparison. These results show that reinforcing vertical suture meniscus repairs with some type of horizontal suture (e.g. AR or OB) significantly increases ultimate load at failure for all-inside, meniscus-based techniques. Conclusions: In a cadaveric lateral meniscus model, all-inside radial repairs using rebar suture, or horizontal suture reinforcing techniques, had higher ultimate load at failure and reduced risk of “cheese wiring”. The AR repair sustained the highest ultimate load at failure, nearly 3x stronger than the two non-reinforcing type repair constructs. These data may provide useful information for surgeons during repair to radial meniscus tears. Future biomechanical study should compare all-inside vs. inside-out repairs to maximize patient outcomes. Cross reference of repair patterns with clinical outcomes using the prospective registry data may support optimal surgical techniques to improve meniscus repair outcomes.
- 1 July 2023
- Published by SAGE Publications in Orthopaedic Journal of Sports Medicine
- Vol. 11 (7_suppl3)
Open AccessPoster 123: Biomechanical Comparison of Four All-inside Meniscus-Based Repairs to Radial Tears of Human Cadaveric Lateral Menisci
Objectives: Meniscal injuries are among the most common orthopedic injuries in the United States. Radial meniscus tears were historically treated with partial meniscectomy, often leading to poor outcomes. Radial tear repair preserves meniscal tissue, may delay knee degeneration, and leads to better long-term outcomes. Repair techniques for radial tears vary and should be evaluated for differences in biomechanical properties and failure mechanisms. All-inside, meniscus-based suture repairs have shorter operating times, minimize risk of nerve injury, and are increasingly possible with novel devices. Our objective was to evaluate the strength based on load-to-failure of four all-inside meniscus-based repair techniques for radial tears in human cadaveric lateral menisci. We chose two techniques that bridged the tear directly – the Double Vertical (DV, Figure 1) and Double Vertical Cross (DVX, Figure 2). We chose two other techniques that added horizontal reinforcing stitches to engage the bridging stitches – the All-inside Rebar (AR, Figure 3) and our novel Oblique Box (OB, Figure 4). We hypothesized that AR and OB would have higher load to failure than DV and DVX. Methods: 36 fresh-frozen human adult lateral menisci were randomized into four groups of nine. Dissection, repair, and testing were completed one meniscus at a time to minimize the time period from thawing to testing. Each meniscus was dissected from its tibial bone block, and a complete radial tear was created at the midbody of the meniscus. Suture repairs were performed using 2-0 braided suture and a straight needle. Menisci were repaired using the DV, DVX, AR, and OB techniques with meniscus- based suturing to simulate the all-inside, meniscus-based approach. All suture dimensions were standardized as indicated on Figures 1-4, and all knots were tied on the superior surface of the menisci. The suture patterns for all repair types used loops that passed above the superior and below the inferior surfaces of the meniscus. The DV repair used two sutures in loops perpendicular to the tear. DVX used two sutures in loops that crossed over the tear. AR used two sutures in loops parallel to the tear acting as reinforcing rebar and two bridging sutures perpendicular to the tear and outside the rebar sutures. OB used two sutures to create a trapezoidal reinforcing box on either side of the tear and two bridging sutures in loops perpendicular to the tear and inside the box. The repaired menisci were loaded on an Instron 5944 test frame with 2 kN load cell using custom clamps. They underwent cyclic loading of 5-30 N for 500 cycles at 10 mm/min, a 30-minute resting period, and a single trial of load-to-failure at 10 mm/min. The ultimate load at failure was analyzed via one-way ANOVA with Tukey’s test for pairwise comparisons and significance set at p<0.05. Results: Failure occurred due to suture cutout in all specimens. Repair constructs that lacked a reinforcing-type suture (DV and DVX) cut through or “cheese-wired” at lower loads than repairs with reinforcing sutures (AR and OB). Mean ± standard deviation ultimate load values for each repair group were 60 N ± 24.5 for DV, 58 N ± 17.4 for DVX, 168 N ± 33.9 for AR, and 105 N ± 9.0 for OB. The ultimate load for all repair techniques were significantly different from each other by Tukey’s test with the exception of the DV and DVX comparison. These results show that reinforcing vertical suture meniscus repairs with some type of horizontal suture (e.g. AR or OB) significantly increases ultimate load at failure for all-inside, meniscus-based techniques. Conclusions: In a cadaveric lateral meniscus model, all-inside radial repairs using rebar suture, or horizontal suture reinforcing techniques, had higher ultimate load at failure and reduced risk of “cheese wiring”. The AR repair sustained the highest ultimate load at failure, nearly 3x stronger than the two non-reinforcing type repair constructs. These data may provide useful information for surgeons during repair to radial meniscus tears. Future biomechanical study should compare all-inside vs. inside-out repairs to maximize patient outcomes. Cross reference of repair patterns with clinical outcomes using the prospective registry data may support optimal surgical techniques to improve meniscus repair outcomes.
- Open Access
- 1 July 2023
- Published by SAGE Publications in Orthopaedic Journal of Sports Medicine
- Vol. 11 (7_suppl3)
Poster 237: Menisco-Tibial Ligament Complex Anatomy and Biomechanics – Implications for Meniscus Repairs, Ramp Lesions and Transplants
Objectives: Meniscal injuries are among the most common orthopedic injuries in the United States. Meniscus repairs frequently achieve stability via capsular based repair techniques. Recent studies on meniscal ramp lesions, postero-lateral tears, and meniscus transplants demonstrate some shortcomings of meniscus suture techniques that incorporate menisco-capsular complex (MCC) repair.1-3 Meniscus extrusion may also be affected by the function and integrity of the meniscus/menisco-tibial ligament complex (MTLC).4 Inclusion of the MTLC in some repair/transplant constructs may produce more normal anatomic and biomechanical meniscus function, including the prevention of meniscus extrusion. However, the biomechanical properties of the MTCL in pediatric tissue has not been studied. Our objective was to evaluate the anatomy and biomechanical strength of the MTLC of the medial and lateral meniscus of pediatric knees. We hypothesized: 1) posterior anatomy of the medial and lateral knee would demonstrate a consistent recess or space between the posterior meniscus/MTLC complex and the MCC; and 2) the MTLC would demonstrate unique biomechanical characteristics between the posterior, middle, and anterior 1/3 zones of the medial and lateral meniscus. Methods: 14 fresh-frozen pediatric human knees from 10 donors (mean 7.5 years, range 5-10 years) were used in this study. The distance between the mensico-tibial ligament at the joint capsule and the height of the meniscus was measured with a depth gauge and digital caliper. We define this distance as the depth of the recess between MTLC and MCC (Fig. 1). Subsequently, the medial and lateral menisci were divided into approximate thirds with radial cuts extending through the menisco-tibial ligaments, creating anterior, central, and posterior testing zones for each meniscus (Fig. 2A). The posterior and anterior roots of each meniscus were released from the tibial attachment. Sandpaper was glued to each meniscus segment. Each tibial specimen was potted in fiberglass resin and mounted on an Instron 5944 test frame with a 2 kN load cell. Each meniscus/MTLC complex underwent 10 cycles of preconditioning from 3-5N at 10 mm/min followed by monotonic load to failure testing (Fig. 2B). The depth of recess, load-to-failure, and stiffness (maximum slope of load-displacement curve) were analyzed using linear mixed models with donor and limb as random factors and compartment (M/L) and position as fixed factors. Significance was at p<0.05 and pairwise comparisons used Bonferroni’s test. Results are reported as mean ± s.d. Results: A clear separation of the posterior 1/3 of each meniscus/MTLC and the posterior MCC was seen for each specimen, with a less obvious separation in anterior and central thirds. The depth of recess was significantly larger (p=0.049) in the posterior region (5.41 ± 2.05 mm) than in the anterior region (3.40 ± 2.00 mm), with no significant difference between medial and lateral menisci (Fig. 3). This confirms a distinct separation between the MTLC and the MCC. The load to failure in the anterior region (66.8 ± 31.3 N) was significantly lower than that in the central (91.7 ± 28.0 N, p=0.014) or posterior (93.5 ± 36.5 N, p=0.005) regions, with no significant difference between medial and lateral menisci (Fig. 4A). The stiffness of the central MTLC complex was significantly lower (p=0.014) in lateral menisci (10.0 ± 4.2 N/m) than in medial menisci (18.8 ± 9.4 N/m), with no other significant differences between regions (Fig. 4B). Conclusions: This study defines a clear space in the posterior 1/3 of the medial and lateral meniscus, in which the MTLC complex is distinct from the posterior MCC of the knee joint. This anatomic finding may suggest alternative techniques of meniscus repair/transplant fixation that include direct repair of some meniscus regions to the menisco-tibial ligament instead of meniscus repair to the capsular layer or MCC. This may be of particular importance to Ramp meniscus lesions, other posterior meniscus tear patterns, and meniscus transplant fixation techniques. Our results demonstrate that the central and posterior region of the MTLC can withstand higher loads than the anterior region, indicating that meniscus repairs in the central/posterior region may be of particular importance. These findings support continued development and evaluation of MTLC repair techniques that seek to reproduce the biomechanical and anatomic function of the MTLC, the MCC, and posterior meniscus. Future studies will need to evaluate the impact of MTLC repair on meniscus repair/transplant outcomes and meniscus extrusion. Abrams GD, Frank RM, Gupta AK, Harris JD, McCormick FM, Cole BJ. Trends in meniscus repair and meniscectomy in the United States, 2005-2011. Am J Sports Med. 2013;41(10):2333-2339. doi:10.1177/0363546513495641. Paxton ES, Stock MV, Brophy RH. Meniscal repair versus partial meniscectomy: a systematic review comparing reoperation rates and clinical outcomes. Arthrosc J Arthrosc Relat Surg Off Publ Arthrosc Assoc N Am Int Arthrosc Assoc. 2011;27(9):1275-1288. doi:10.1016/j.arthro.2011.03.088. Vint H, Quartley M, Robinson JR. All-inside versus inside-out meniscal repair: A systematic review and meta-analysis. The Knee. 2021;28:326-337. doi:10.1016/j.knee.2020.12.005. Paletta GA Jr, Crane DM, Konicek J, Piepenbrink M, Higgins LD, Milner JD, Wijdicks CA. Surgical Treatment of Meniscal Extrusion: A Biomechanical Study on the Role of the Medial Meniscotibial Ligaments With Early Clinical Validation. Orthop J Sports Med. 2020;8(7):2325967120936672. Published 2020 Jul 29. doi:10.1177/2325967120936672.
- 1 July 2023
- Published by SAGE Publications in Orthopaedic Journal of Sports Medicine
- Vol. 11 (7_suppl3)
Open AccessPoster 237: Menisco-Tibial Ligament Complex Anatomy and Biomechanics – Implications for Meniscus Repairs, Ramp Lesions and Transplants
Objectives: Meniscal injuries are among the most common orthopedic injuries in the United States. Meniscus repairs frequently achieve stability via capsular based repair techniques. Recent studies on meniscal ramp lesions, postero-lateral tears, and meniscus transplants demonstrate some shortcomings of meniscus suture techniques that incorporate menisco-capsular complex (MCC) repair.1-3 Meniscus extrusion may also be affected by the function and integrity of the meniscus/menisco-tibial ligament complex (MTLC).4 Inclusion of the MTLC in some repair/transplant constructs may produce more normal anatomic and biomechanical meniscus function, including the prevention of meniscus extrusion. However, the biomechanical properties of the MTCL in pediatric tissue has not been studied. Our objective was to evaluate the anatomy and biomechanical strength of the MTLC of the medial and lateral meniscus of pediatric knees. We hypothesized: 1) posterior anatomy of the medial and lateral knee would demonstrate a consistent recess or space between the posterior meniscus/MTLC complex and the MCC; and 2) the MTLC would demonstrate unique biomechanical characteristics between the posterior, middle, and anterior 1/3 zones of the medial and lateral meniscus. Methods: 14 fresh-frozen pediatric human knees from 10 donors (mean 7.5 years, range 5-10 years) were used in this study. The distance between the mensico-tibial ligament at the joint capsule and the height of the meniscus was measured with a depth gauge and digital caliper. We define this distance as the depth of the recess between MTLC and MCC (Fig. 1). Subsequently, the medial and lateral menisci were divided into approximate thirds with radial cuts extending through the menisco-tibial ligaments, creating anterior, central, and posterior testing zones for each meniscus (Fig. 2A). The posterior and anterior roots of each meniscus were released from the tibial attachment. Sandpaper was glued to each meniscus segment. Each tibial specimen was potted in fiberglass resin and mounted on an Instron 5944 test frame with a 2 kN load cell. Each meniscus/MTLC complex underwent 10 cycles of preconditioning from 3-5N at 10 mm/min followed by monotonic load to failure testing (Fig. 2B). The depth of recess, load-to-failure, and stiffness (maximum slope of load-displacement curve) were analyzed using linear mixed models with donor and limb as random factors and compartment (M/L) and position as fixed factors. Significance was at p<0.05 and pairwise comparisons used Bonferroni’s test. Results are reported as mean ± s.d. Results: A clear separation of the posterior 1/3 of each meniscus/MTLC and the posterior MCC was seen for each specimen, with a less obvious separation in anterior and central thirds. The depth of recess was significantly larger (p=0.049) in the posterior region (5.41 ± 2.05 mm) than in the anterior region (3.40 ± 2.00 mm), with no significant difference between medial and lateral menisci (Fig. 3). This confirms a distinct separation between the MTLC and the MCC. The load to failure in the anterior region (66.8 ± 31.3 N) was significantly lower than that in the central (91.7 ± 28.0 N, p=0.014) or posterior (93.5 ± 36.5 N, p=0.005) regions, with no significant difference between medial and lateral menisci (Fig. 4A). The stiffness of the central MTLC complex was significantly lower (p=0.014) in lateral menisci (10.0 ± 4.2 N/m) than in medial menisci (18.8 ± 9.4 N/m), with no other significant differences between regions (Fig. 4B). Conclusions: This study defines a clear space in the posterior 1/3 of the medial and lateral meniscus, in which the MTLC complex is distinct from the posterior MCC of the knee joint. This anatomic finding may suggest alternative techniques of meniscus repair/transplant fixation that include direct repair of some meniscus regions to the menisco-tibial ligament instead of meniscus repair to the capsular layer or MCC. This may be of particular importance to Ramp meniscus lesions, other posterior meniscus tear patterns, and meniscus transplant fixation techniques. Our results demonstrate that the central and posterior region of the MTLC can withstand higher loads than the anterior region, indicating that meniscus repairs in the central/posterior region may be of particular importance. These findings support continued development and evaluation of MTLC repair techniques that seek to reproduce the biomechanical and anatomic function of the MTLC, the MCC, and posterior meniscus. Future studies will need to evaluate the impact of MTLC repair on meniscus repair/transplant outcomes and meniscus extrusion. Abrams GD, Frank RM, Gupta AK, Harris JD, McCormick FM, Cole BJ. Trends in meniscus repair and meniscectomy in the United States, 2005-2011. Am J Sports Med. 2013;41(10):2333-2339. doi:10.1177/0363546513495641. Paxton ES, Stock MV, Brophy RH. Meniscal repair versus partial meniscectomy: a systematic review comparing reoperation rates and clinical outcomes. Arthrosc J Arthrosc Relat Surg Off Publ Arthrosc Assoc N Am Int Arthrosc Assoc. 2011;27(9):1275-1288. doi:10.1016/j.arthro.2011.03.088. Vint H, Quartley M, Robinson JR. All-inside versus inside-out meniscal repair: A systematic review and meta-analysis. The Knee. 2021;28:326-337. doi:10.1016/j.knee.2020.12.005. Paletta GA Jr, Crane DM, Konicek J, Piepenbrink M, Higgins LD, Milner JD, Wijdicks CA. Surgical Treatment of Meniscal Extrusion: A Biomechanical Study on the Role of the Medial Meniscotibial Ligaments With Early Clinical Validation. Orthop J Sports Med. 2020;8(7):2325967120936672. Published 2020 Jul 29. doi:10.1177/2325967120936672.
- 10 February 2020
- Published by Wiley in Arthroscopy
- Vol. 36 (5) , 1365-1373
Does Lateral Extra‐articular Tenodesis of the Knee Affect Anterior Cruciate Ligament Graft In Situ Forces and Tibiofemoral Contact Pressures?
Purpose: To quantify the effects of lateral extra‐articular tenodesis (LET) on tibiofemoral compartment contact area and pressures, knee kinematics, and forces. Methods: Nine cadaveric knees were tested using a robotic testing system. Two loading conditions, (1) anterior tibial translational load coupled with axial compression and (2) internal tibial torque coupled with axial compression, were applied for each knee state at full extension and 30°, 60°, and 90° of knee flexion. Kinematic data was recorded for 3 knee states: anterolateral capsule (ALC) competent, ALC deficient, and post‐LET using a 6‐mm semitendinosus graft. In situ force in the anterior cruciate ligament (ACL) was quantified using the principle of superposition by comparing the change in force measured before and after the removal of the ALC. Contact area and pressures in each tibiofemoral compartment were measured by replaying kinematics after soft tissues were removed and pressure sensors were inserted. Results: In response to an anterior tibial translational load, mean contact area in the medial compartment decreased by 33.1% from the ALC‐competent to post‐LET knee states at 90° of knee flexion ( P = .042). No significant differences in lateral compartment contact pressure were found between knee states. In situ force in the ACL in response to an anterior tibial translational load decreased by 43.4% and 50% from the ALC‐deficient to post‐LET knee states at 60° ( P = .02) and 90° ( P = .006). No significant difference in kinematics was observed between the ALC‐competent and post‐LET knee states in each of the loading conditions at all knee flexion angles ( P > .05). Conclusions: In this in vitro model, LET with a semitendinosus graft did not significantly overconstrain the knee or increase pressure in the lateral compartment. Additionally, LET reduced the in situ force in the ACL in the setting of ALC injury. Clinical Relevance: The lack of knee overconstraint without significant increases in lateral compartment pressures indicates that if an LET with semitendinosus graft is not overtensioned, accelerated degenerative changes in the lateral compartment may not be expected after this procedure.
- 10 February 2020
- Published by Wiley in Arthroscopy
- Vol. 36 (5) , 1365-1373
Does Lateral Extra‐articular Tenodesis of the Knee Affect Anterior Cruciate Ligament Graft In Situ Forces and Tibiofemoral Contact Pressures?
Purpose: To quantify the effects of lateral extra‐articular tenodesis (LET) on tibiofemoral compartment contact area and pressures, knee kinematics, and forces. Methods: Nine cadaveric knees were tested using a robotic testing system. Two loading conditions, (1) anterior tibial translational load coupled with axial compression and (2) internal tibial torque coupled with axial compression, were applied for each knee state at full extension and 30°, 60°, and 90° of knee flexion. Kinematic data was recorded for 3 knee states: anterolateral capsule (ALC) competent, ALC deficient, and post‐LET using a 6‐mm semitendinosus graft. In situ force in the anterior cruciate ligament (ACL) was quantified using the principle of superposition by comparing the change in force measured before and after the removal of the ALC. Contact area and pressures in each tibiofemoral compartment were measured by replaying kinematics after soft tissues were removed and pressure sensors were inserted. Results: In response to an anterior tibial translational load, mean contact area in the medial compartment decreased by 33.1% from the ALC‐competent to post‐LET knee states at 90° of knee flexion ( P = .042). No significant differences in lateral compartment contact pressure were found between knee states. In situ force in the ACL in response to an anterior tibial translational load decreased by 43.4% and 50% from the ALC‐deficient to post‐LET knee states at 60° ( P = .02) and 90° ( P = .006). No significant difference in kinematics was observed between the ALC‐competent and post‐LET knee states in each of the loading conditions at all knee flexion angles ( P > .05). Conclusions: In this in vitro model, LET with a semitendinosus graft did not significantly overconstrain the knee or increase pressure in the lateral compartment. Additionally, LET reduced the in situ force in the ACL in the setting of ALC injury. Clinical Relevance: The lack of knee overconstraint without significant increases in lateral compartment pressures indicates that if an LET with semitendinosus graft is not overtensioned, accelerated degenerative changes in the lateral compartment may not be expected after this procedure.
- 27 January 2020
- Published by Wolters Kluwer Health in Journal of Bone and Joint Surgery
- Vol. 102 (7) , 567-573
Partial Lateral Meniscectomy Affects Knee Stability Even in Anterior Cruciate Ligament-Intact Knees
Background: The effects of a partial lateral meniscectomy on knee kinematics and forces in the lateral meniscus are critical to understand. The purpose of this study was to quantify the effects of varying sizes of partial lateral meniscectomies of the posterior horn and a total lateral meniscectomy on knee kinematics and resultant forces in the lateral meniscus. Methods: Using a robotic testing system, loads (134-N anterior tibial load + 200-N axial compression, 5-Nm internal tibial torque + 5-Nm valgus torque, and 5-Nm external tibial torque + 5-Nm valgus torque) were applied to 10 fresh-frozen cadaveric knees. The resulting joint motion and resultant forces in the lateral meniscus were determined for 4 knee states: intact, one-third and two-thirds partial lateral meniscectomies of the posterior horn, and total lateral meniscectomy. Results: A decrease in lateral translation of the tibia (up to 166.7%) was observed after one-third partial lateral meniscectomies of the posterior horn compared with the intact knee, in response to an anterior load at all knee flexion angles tested (p < 0.05). One-third partial lateral meniscectomies of the posterior horn decreased the resultant forces in the lateral meniscus compared with the intact knee at all knee flexion angles tested in response to an anterior load (p < 0.05) and to an internal tibial torque (p < 0.05). The results of two-thirds partial lateral meniscectomies of the posterior horn were similar to those of one-third partial meniscectomies (p > 0.05). Total lateral meniscectomies further decreased the lateral translation of the tibia (up to 316.6%) compared with the intact knee in response to an anterior load (p < 0.05). Conclusions: The changes in joint motion and meniscal forces observed in this study after even small partial lateral meniscectomies may predispose knees to further injury. Clinical Relevance: Surgeons should always consider repairing and minimizing the resection of even small lateral meniscal tears to prevent the potential deleterious effects of partial meniscectomy reported in this cadaveric study.
- 27 January 2020
- Published by Wolters Kluwer Health in Journal of Bone and Joint Surgery
- Vol. 102 (7) , 567-573
Partial Lateral Meniscectomy Affects Knee Stability Even in Anterior Cruciate Ligament-Intact Knees
Background: The effects of a partial lateral meniscectomy on knee kinematics and forces in the lateral meniscus are critical to understand. The purpose of this study was to quantify the effects of varying sizes of partial lateral meniscectomies of the posterior horn and a total lateral meniscectomy on knee kinematics and resultant forces in the lateral meniscus. Methods: Using a robotic testing system, loads (134-N anterior tibial load + 200-N axial compression, 5-Nm internal tibial torque + 5-Nm valgus torque, and 5-Nm external tibial torque + 5-Nm valgus torque) were applied to 10 fresh-frozen cadaveric knees. The resulting joint motion and resultant forces in the lateral meniscus were determined for 4 knee states: intact, one-third and two-thirds partial lateral meniscectomies of the posterior horn, and total lateral meniscectomy. Results: A decrease in lateral translation of the tibia (up to 166.7%) was observed after one-third partial lateral meniscectomies of the posterior horn compared with the intact knee, in response to an anterior load at all knee flexion angles tested (p < 0.05). One-third partial lateral meniscectomies of the posterior horn decreased the resultant forces in the lateral meniscus compared with the intact knee at all knee flexion angles tested in response to an anterior load (p < 0.05) and to an internal tibial torque (p < 0.05). The results of two-thirds partial lateral meniscectomies of the posterior horn were similar to those of one-third partial meniscectomies (p > 0.05). Total lateral meniscectomies further decreased the lateral translation of the tibia (up to 316.6%) compared with the intact knee in response to an anterior load (p < 0.05). Conclusions: The changes in joint motion and meniscal forces observed in this study after even small partial lateral meniscectomies may predispose knees to further injury. Clinical Relevance: Surgeons should always consider repairing and minimizing the resection of even small lateral meniscal tears to prevent the potential deleterious effects of partial meniscectomy reported in this cadaveric study.