CSChenghao Su

Chenghao Su

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Chenghao Su has a total of 9 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Processing and Properties of Single-Crystal Copper Wire

    by Jun Cao, Xuefeng Wu, Chenghao Su, Hewei Jia, Yongzhen Sun

    The effects of drawing parameters and annealing process on the properties and microstructure of single crystal copper wire are studied using a wire-drawing machine, heat-treatment equipment, microcomputer-controlled electronic universal tester, resistance tester, and scanning electron microscope. The results show that, after drawing the single-crystal copper wire with a single-pass deformation of 14%, the grains elongate along the tensile direction, tensile strength increases from 500.83 MPa to 615.5 Mpa, and resistivity changes from 1.745 × 10−8 Ω·m to 1.732 × 10−8 Ω·m. After drawing at a drawing rate of 500 m/min, the degree of grain refinement increases and tensile strength increases from 615.5 Mpa to 660.26 Mpa. When a copper wire of Φ0.08 mm is annealed, its tensile strength decreases from 660.26 Mpa to 224.7 Mpa, and elongation increases from 1.494% to 19.87% when the annealing temperature increases to 400 °C. When the annealing temperature increases to 550 °C, the tensile strength and elongation decrease to 214.4 MPa and 12.18%, respectively.


  • Open Access

    Study on the Effect of Cold Deformation and Heat Treatment on the Properties of Cu-Ag Alloy Wire

    by Xuefeng Wu, Hewei Jia, Jun Cao, Chenghao Su

    The effects of various drawing parameters and annealing processes on the structure and properties of Cu-Ag wires, containing 1 wt% silver, were investigated using specialized equipment including fine wire drawing machines, very fine wire drawing machines, heat treatment equipment, tensile testing machines, microcomputer-controlled electronic universal testers, resistance testers, and scanning electron microscopes. The results revealed that continuous drawing of Cu-1%Ag alloy wires led to elongation of the grains, resulting in a uniform and tightly fibrous microstructure. Moreover, the tensile strength of the alloy wire increased from 670 MPa to 783.9 MPa after a single-pass with a deformation of 14%. Subsequently, when the wire was drawn at a speed of 500 m/min, the tensile strength further increased to 820.1 MPa. After annealing the Փ0.08 mm Cu-1% Ag alloy wire, an increase in annealing temperature up to 500°C resulted in the wire's tensile strength decreasing from 820.1 MPa to 377.5 MPa. Simultaneously, the elongation increased from 1.94% to 15.21%, and the resistivity decreased from 1.931×10-8Ω·m to 1.723×10-8Ω·m. Additionally, when annealing was conducted at a rate of 80 m/min, the wire resistivity dropped to 1.635×10-8Ω·m.


  • Top Cited Papers
    Open Access

    Research Progress on Bonding Wire for Microelectronic Packaging

    by Hongliang Zhou, Yingchong Zhang, Jun Cao, Chenghao Su, Chong Li, Andong Chang, Bin An

    Wire bonding is still the most popular chip interconnect technology in microelectronic packaging and will not be replaced by other interconnect methods for a long time in the future. Au bonding wire has been a mainstream semiconductor packaging material for many decades due to its unique chemical stability, reliable manufacturing, and operation properties. However, the drastic increasing price of Au bonding wire has motivated the industry to search for alternate bonding materials for use in microelectronic packaging such as Cu and Ag bonding wires. The main benefits of using Cu bonding wire over Au bonding wire are lower material cost, higher electrical and thermal conductivity that enables smaller diameter Cu bonding wire to carry identical current as an Au bonding wire without overheating, and lower reaction rates between Cu and Al that serve to improve the reliability performance in long periods of high temperature storage conditions. However, the high hardness, easy oxidation, and complex bonding process of Cu bonding wire make it not the best alternative for Au bonding wire. Therefore, Ag bonding wire as a new alternative with potential application comes to the packaging market; it has higher thermal conductivity and lower electric resistivity in comparison with Cu bonding wire, which makes it a good candidate for power electronics, and higher elastic modulus and hardness than Au bonding wire, but lower than Cu bonding wire, which makes it easier to bond. This paper begins with a brief introduction about the developing history of bonding wires. Next, manufacturability and reliability of Au, Cu, and Ag bonding wires are introduced. Furthermore, general comparisons on basic performance and applications between the three types of bonding wires are discussed. In the end, developing trends of bonding wire are provided. Hopefully, this review can be regarded as a useful complement to other reviews on wire bonding technology and applications.