Processing and Properties of Single-Crystal Copper Wire
Open Access
- 10 November 2023
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 14 (11) , 2080
Abstract
The effects of drawing parameters and annealing process on the properties and microstructure of single crystal copper wire are studied using a wire-drawing machine, heat-treatment equipment, microcomputer-controlled electronic universal tester, resistance tester, and scanning electron microscope. The results show that, after drawing the single-crystal copper wire with a single-pass deformation of 14%, the grains elongate along the tensile direction, tensile strength increases from 500.83 MPa to 615.5 Mpa, and resistivity changes from 1.745 × 10−8 Ω·m to 1.732 × 10−8 Ω·m. After drawing at a drawing rate of 500 m/min, the degree of grain refinement increases and tensile strength increases from 615.5 Mpa to 660.26 Mpa. When a copper wire of Φ0.08 mm is annealed, its tensile strength decreases from 660.26 Mpa to 224.7 Mpa, and elongation increases from 1.494% to 19.87% when the annealing temperature increases to 400 °C. When the annealing temperature increases to 550 °C, the tensile strength and elongation decrease to 214.4 MPa and 12.18%, respectively.Keywords
Funding Information
- joint fund project of the evolution law of microstructure and properties and the regulation mechanism of bonding properties in the preparation and processing of copper-based micro-bonding wires (U21A2051)
This publication has 16 references indexed in Scilit:
- A Survey of Detection Methods for Die Attachment and Wire Bonding Defects in Integrated Circuit ManufacturingIEEE Access, 2022
- Microstructure and properties of cold-drawn Cu and Cu-Fe alloy wiresIOP Conference Series: Materials Science and Engineering, 2022
- Emerging Interconnection Technology and Pb-Free Solder Materials for Advanced Microelectronic PackagingMetals, 2021
- Microstructure and properties of Cu-Ag alloy prepared by continuously directional solidificationJournal of Alloys and Compounds, 2021
- Die attachment, wire bonding, and encapsulation process in LED packaging: A reviewSensors and Actuators A: Physical, 2021
- Cross-sectional structure, microstructure and mechanical property evolutions of brass cladding pure copper stranded wire composite during drawingTransactions of Nonferrous Metals Society of China, 2020
- High Strength Nanocrystalline Ordered Cu3Pd Alloy Produced by Severe Cold-Drawing and AnnealingRussian Physics Journal, 2020
- Microstructural evolution and properties of Cu–20 wt% Ag alloy wire by multi-pass continuous drawingNanotechnology Reviews, 2020
- Dependence of texture evolution on initial orientation in drawn single crystal copperMaterials Characterization, 2011
- Dislocation boundaries in drawn single crystal copper wires produced by Ohno continuous castingJournal of Materials Science, 2009