Jianjie Yao

A liquid nitrogen cooling circulating unit is a necessary condition for the stable operation of a cryogenic oscillator, which can provide a stable working environment for the oscillator. In this paper, according to the user’s functional requirements and performance parameters, a closed cooling system with supercooled liquid nitrogen as the medium was designed using SOLIDWORKS 2021 software, which can provide a suitable working environment for the cryogenic oscillator. Combined with the system heat load analysis, theoretical calculation for and the design of the coil heat exchanger, one of the core pieces of equipment of the unit, were carried out. The performance of the designed nitrogen exhaust heater was studied using FLUENT 2021 software, and the velocity field and temperature field of the nitrogen exhaust heater were analyzed. The results show that the outlet temperature of the nitrogen exhaust heating device can reach up to 310 K, and the outlet flow rate of the heating device is 0.01528 kg/s. The experiments on the liquid nitrogen circulating unit using the simulated load equipment show that the refrigeration power of the unit can reach a design index of 600 W, and the temperature of the liquid nitrogen at the liquid outlet of the unit can reach 77.8 K. The experiments also show that the unit meets the design requirements.

The self-cleaning ability of superhydrophobic metal surfaces has attracted extensive attention. The preparation of superhydrophobic material using the coating method is a common processing method. In this experiment, aluminum fins were processed by laser etching and perfluorinated two-step coating. The aluminum surface was modified using a femtosecond laser and 1H,1H,2H,2H- perfluorooctane triethoxysilane (PFOTES). A superhydrophobic aluminum surface with excellent mechanical stability and self-cleaning properties was obtained with the superhydrophobic contact angle (WCA) of 152.8° and the rolling angle (SA) of 0.6°. The results show that the superhydrophobic surface has an excellent cleaning effect compared with an ordinary surface in unit time. Then, a wear resistance test of the superhydrophobic surface was carried out by using the physical wear method. The results show that physical wear had a low influence on the hydrophobic property of the specimen surface. Finally, the Vickers hardness analysis found that the superhydrophobic surface hardness was significantly better than the ordinary surface hardness compared with the superhydrophobic surface hardness. Based on the excellent self-cleaning properties, wear resistance, and robustness of superhydrophobic materials, the laser-etched and perfluorinated superhydrophobic aluminum fins designed and manufactured in this study have broad application prospects in improving the heat transfer efficiency of finned heat exchangers.