Xiangyou Lu

A liquid nitrogen cooling circulating unit is a necessary condition for the stable operation of a cryogenic oscillator, which can provide a stable working environment for the oscillator. In this paper, according to the user’s functional requirements and performance parameters, a closed cooling system with supercooled liquid nitrogen as the medium was designed using SOLIDWORKS 2021 software, which can provide a suitable working environment for the cryogenic oscillator. Combined with the system heat load analysis, theoretical calculation for and the design of the coil heat exchanger, one of the core pieces of equipment of the unit, were carried out. The performance of the designed nitrogen exhaust heater was studied using FLUENT 2021 software, and the velocity field and temperature field of the nitrogen exhaust heater were analyzed. The results show that the outlet temperature of the nitrogen exhaust heating device can reach up to 310 K, and the outlet flow rate of the heating device is 0.01528 kg/s. The experiments on the liquid nitrogen circulating unit using the simulated load equipment show that the refrigeration power of the unit can reach a design index of 600 W, and the temperature of the liquid nitrogen at the liquid outlet of the unit can reach 77.8 K. The experiments also show that the unit meets the design requirements.

The research aims to examine the distribution of porosity and the combined heat and moisture movement while grains are being dried. This research concerns the porosity and flow of soybeans with different particle size ratios and the drying of soybeans with varying particle temperatures. Due to the similarity in shape between soybeans and balls, this article adopts a ball shape to study the heat and moisture transfer of soybean particles, which can also be used for the study of grains with similar shapes, such as mung beans and red beans. Random models of soybeans with varying proportions were created using modeling software Edem and UG. UDF programming was added to the preprocessing software Fluent to analyze the porosity, airstream allocation, and the interaction of temperature and moisture transfer in packed beds with various cylinder-to-particle size ratios and particle temperatures. A packed bed of soybeans was created, and the study examined the impact of cylinder-to-particle size ratios of 4.44, 5.6, and 6.25 on porosity. The results show that the radial porosity in the packed bed displays a fluctuating profile, with partial porosity increasing as the cylinder-to-particle size ratio increases. Increasing the ratio of cylinder size to particle size exacerbated the tortuosity of the flow paths within the packed bed. Simultaneously, the particle temperature increases, leading to a rise in the instantaneous heat transfer during the drying process, strengthening the ratio of moisture transfer within the packed bed. The method effectively models during convective heat and mass transfer in the liquid facies, as well as thermal and mass spread in the solid facies. The results of this study have been validated on physical models. The air temperature of 273 K is considered during the simulation process

The self-cleaning ability of superhydrophobic metal surfaces has attracted extensive attention. The preparation of superhydrophobic material using the coating method is a common processing method. In this experiment, aluminum fins were processed by laser etching and perfluorinated two-step coating. The aluminum surface was modified using a femtosecond laser and 1H,1H,2H,2H- perfluorooctane triethoxysilane (PFOTES). A superhydrophobic aluminum surface with excellent mechanical stability and self-cleaning properties was obtained with the superhydrophobic contact angle (WCA) of 152.8° and the rolling angle (SA) of 0.6°. The results show that the superhydrophobic surface has an excellent cleaning effect compared with an ordinary surface in unit time. Then, a wear resistance test of the superhydrophobic surface was carried out by using the physical wear method. The results show that physical wear had a low influence on the hydrophobic property of the specimen surface. Finally, the Vickers hardness analysis found that the superhydrophobic surface hardness was significantly better than the ordinary surface hardness compared with the superhydrophobic surface hardness. Based on the excellent self-cleaning properties, wear resistance, and robustness of superhydrophobic materials, the laser-etched and perfluorinated superhydrophobic aluminum fins designed and manufactured in this study have broad application prospects in improving the heat transfer efficiency of finned heat exchangers.

This paper uses a new method combining nanosecond laser processing technology and sol-gel to design and manufacture mechanically robust micro-nano structure and modified SiO2@PDMS coating on copper substrate. The superhydrophobic composite surface was successfully synthesized with a water contact angle of 159.5° and a sliding angle of 0°. The characterization of the prepared superhydrophobic surface #3 was studied by optical profilometry, scanning electron microscopy, FT-IR spectroscopy, and X-ray photoelectron spectroscopy. In addition, self-cleaning, wear resistance, anti-icing, corrosion resistance, and NaCl deliquescence behavior were evaluated. The results show that surface #3 can efficiently remove contaminants within 200 s. In the anti-icing experiment, the delayed icing time and ice adhesion strength of surface #3 are 3.33 times and 3.86% of that of the ordinary copper surface, respectively, which can make the icicle slide easily. In the electrochemical test, the corrosion current density decreased by order of magnitude, and the corrosion inhibition efficiency reached 90.57%. Based on its excellent self-cleaning, mechanical robustness, anti-icing, and anti-corrosion properties, we believe that the composite modified surface of the laser-textured@SiO2@PDMS protective layer designed and manufactured in this study is expected to be used in engineering fields such as refrigeration, power grid, automobile and aerospace in the future.