Mustafa A. Aldeeb
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mustafa A. Aldeeb has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Hossam A. Gabbar
Faculty of Engineering and Applied Science, Ontario Tech University, Oshawa, ON L1G 0C5, Canada
5 shared publications - Sharif Abu Darda
Faculty of Engineering and Applied Science, Ontario Tech University, 2000 Simcoe St. North, Oshawa, ON L1G 0C5, Canada
3 shared publications - Isaac Hassen
Faculty of Engineering and Applied Science, Ontario Tech University, 2000 Simcoe St. North, Oshawa, ON L1G 0C5, Canada
2 shared publications - Roman Stetsiuk
Faculty of Engineering and Applied Science, Ontario Tech University, 2000 Simcoe St. North, Oshawa, ON L1G 0C5, Canada
2 shared publications - Vahid Damideh
Fuse Energy Technologies Corp., San Leandro, USA
2 shared publications - Isaac Hassen1 shared publication
Latest Publications
- Open Access
Integrated Optimization Framework for a RF-ICP Plasma-Based System for Solid Waste Treatment
Waste management remains a major challenge worldwide, as rapidly expanding urban populations put greater pressure on traditional disposal methods such as landfilling and incineration. Plasma-based waste treatment offers an innovative, sustainable waste-to-energy solution capable of converting a wide range of waste types. Although plasma technologies provide significant environmental benefits, such as greatly reducing waste volume and emissions compared to conventional approaches, their widespread adoption faces notable economic hurdles. Primary among these is high operational cost due to system inefficiencies. These costs mainly arise from energy losses within the plasma torch, energy consumed during plasma torch tuning with the plasma reactor, and power inefficiencies when processing unsuitable waste loads. These issues not only increase costs but also impact process stability, which can influence stakeholder support and the technology’s commercial potential. Optimizing the process through simulation presents an effective approach to overcoming this inefficiency. However, relying solely on these advanced tools can be time-consuming and requires substantial domain expertise, creating a bottleneck in design and optimization. This paper introduces a new integrated platform combining COMSOL Multiphysics v6.2, Ansys Fluent 2024 R1, and Aspen Plus v12.1 to address these challenges. Using a genetic algorithm, the platform automates the complex task of designing an optimal plasma torch, optimizes it for peak performance, and dynamically adjusts plasma conditions. This intelligent optimization system aims to maximize energy output and process efficiency, directly tackling key cost-related issues.
Open AccessIntegrated Optimization Framework for a RF-ICP Plasma-Based System for Solid Waste Treatment
Waste management remains a major challenge worldwide, as rapidly expanding urban populations put greater pressure on traditional disposal methods such as landfilling and incineration. Plasma-based waste treatment offers an innovative, sustainable waste-to-energy solution capable of converting a wide range of waste types. Although plasma technologies provide significant environmental benefits, such as greatly reducing waste volume and emissions compared to conventional approaches, their widespread adoption faces notable economic hurdles. Primary among these is high operational cost due to system inefficiencies. These costs mainly arise from energy losses within the plasma torch, energy consumed during plasma torch tuning with the plasma reactor, and power inefficiencies when processing unsuitable waste loads. These issues not only increase costs but also impact process stability, which can influence stakeholder support and the technology’s commercial potential. Optimizing the process through simulation presents an effective approach to overcoming this inefficiency. However, relying solely on these advanced tools can be time-consuming and requires substantial domain expertise, creating a bottleneck in design and optimization. This paper introduces a new integrated platform combining COMSOL Multiphysics v6.2, Ansys Fluent 2024 R1, and Aspen Plus v12.1 to address these challenges. Using a genetic algorithm, the platform automates the complex task of designing an optimal plasma torch, optimizes it for peak performance, and dynamically adjusts plasma conditions. This intelligent optimization system aims to maximize energy output and process efficiency, directly tackling key cost-related issues.
- Open Access
Simulation-Based RF-ICP Torch Optimization for Efficient and Environmentally Sustainable Radioactive Waste Management
This study examines methods to improve the energy efficiency of radiofrequency inductively coupled plasma (RF-ICP) torches for radioactive waste treatment, with a focus on surpassing the typical energy efficiency limit of approximately 70%. To improve energy efficiency and plasma performance, this research investigates the transition from axial gas flow to vortex gas flow patterns using COMSOL Multiphysics software v6.2. Key plasma parameters, including energy efficiency, number of gas vortices, heat transfer, and temperature distribution, were analyzed to evaluate the improvements. The results indicate that adopting a vortex flow pattern increases energy conversion efficiency, increases heat flux, and reduces charge losses. Furthermore, optimizing the torch body design, particularly the nozzle, chamber volume, and gas entry angle, significantly improves plasma properties and energy efficiency by up to 90%. Improvements to RF-ICP torches positively impact waste decomposition by creating better thermal conditions that support resource recovery and potential material recycling. In addition, these improvements contribute to reducing secondary waste, mitigating environmental risks, and fostering long-term public support for nuclear technology, thereby promoting a more sustainable approach to waste management. Simulation results demonstrate the potential of RF-ICP flares as a cost-effective and sustainable solution for the thermal treatment of low- to intermediate-level radioactive waste.
Open AccessSimulation-Based RF-ICP Torch Optimization for Efficient and Environmentally Sustainable Radioactive Waste Management
This study examines methods to improve the energy efficiency of radiofrequency inductively coupled plasma (RF-ICP) torches for radioactive waste treatment, with a focus on surpassing the typical energy efficiency limit of approximately 70%. To improve energy efficiency and plasma performance, this research investigates the transition from axial gas flow to vortex gas flow patterns using COMSOL Multiphysics software v6.2. Key plasma parameters, including energy efficiency, number of gas vortices, heat transfer, and temperature distribution, were analyzed to evaluate the improvements. The results indicate that adopting a vortex flow pattern increases energy conversion efficiency, increases heat flux, and reduces charge losses. Furthermore, optimizing the torch body design, particularly the nozzle, chamber volume, and gas entry angle, significantly improves plasma properties and energy efficiency by up to 90%. Improvements to RF-ICP torches positively impact waste decomposition by creating better thermal conditions that support resource recovery and potential material recycling. In addition, these improvements contribute to reducing secondary waste, mitigating environmental risks, and fostering long-term public support for nuclear technology, thereby promoting a more sustainable approach to waste management. Simulation results demonstrate the potential of RF-ICP flares as a cost-effective and sustainable solution for the thermal treatment of low- to intermediate-level radioactive waste.
- Open Access
Analysis of Essential Features and Optimal Operational Parameters of an RF-ICP Torch for Waste Treatment Applications
Recently, plasma-based pyrolysis has gained increasing prominence as a technology in response to the growing challenges in waste disposal and the recognition of opportunities to generate valuable by-products. The efficiency of the pyrolysis process is intricately tied to the characteristics of the plasma involved, particularly the effective electron temperature (Teff) and plasma density (ne). This study aimed to conduct a comprehensive examination of the essential features and optimal operational parameters of a developed RF-ICP torch specifically designed for small-scale municipal solid waste (MSW) pyrolysis (mixture of paper and polypropylene) with the goal of controlling both the torch and the overall process. Using optical emission spectroscopy (OES), we measured plasma parameters, specifically (Teff) and (ne), while varying argon gas flow rates and RF powers. The (Teff) and (ne)were determined using the Boltzmann plot and Stark broadening, respectively. The RF torch was found to generate (ne) up to approximately and (Teff) up to around 8200 K, with both parameters being controlled by the discharge power and gas flow rate. Additionally, a power-losing mechanism, namely the anomalous skin effect, was detected during the study, which is uncommon in atmospheric plasma discharge.Open AccessAnalysis of Essential Features and Optimal Operational Parameters of an RF-ICP Torch for Waste Treatment Applications
Recently, plasma-based pyrolysis has gained increasing prominence as a technology in response to the growing challenges in waste disposal and the recognition of opportunities to generate valuable by-products. The efficiency of the pyrolysis process is intricately tied to the characteristics of the plasma involved, particularly the effective electron temperature (Teff) and plasma density (ne). This study aimed to conduct a comprehensive examination of the essential features and optimal operational parameters of a developed RF-ICP torch specifically designed for small-scale municipal solid waste (MSW) pyrolysis (mixture of paper and polypropylene) with the goal of controlling both the torch and the overall process. Using optical emission spectroscopy (OES), we measured plasma parameters, specifically (Teff) and (ne), while varying argon gas flow rates and RF powers. The (Teff) and (ne)were determined using the Boltzmann plot and Stark broadening, respectively. The RF torch was found to generate (ne) up to approximately and (Teff) up to around 8200 K, with both parameters being controlled by the discharge power and gas flow rate. Additionally, a power-losing mechanism, namely the anomalous skin effect, was detected during the study, which is uncommon in atmospheric plasma discharge. - Open Access
- 26 December 2023
- Published by MDPI AG in Preprints.org
Efficient Waste Management via Tuning Plasma Properties in Radio Frequency Inductively Coupled Plasma
In the last ten years, plasma waste treatment has gained increasing prominence as a technology in response to growing challenges in waste disposal and the recognition of opportunities for generating valuable by-products. The efficiency and outcomes of this process are intricately linked to the characteristics of the plasma involved, such as plasma enthalpy and heat flux. We employed an experimental radio frequency inductively coupled plasma (RF-ICP) torch operating at atmospheric pressure to generate plasma. Utilizing optical emission spectroscopy (OES), we measured plasma parameters, specifically the effective electron temperature (Teff) and plasma density (ne), while varying argon gas flow rates and RF powers. Our investigations revealed that both flow rate and RF power exert significant control over plasma parameters, and we observed an unusual phenomenon within this range of discharge pressures. Consequently, both the plasma's enthalpy and the heat flux it generates are influenced by variations in both flow rate and RF power.
- 26 December 2023
- Published by MDPI AG in Preprints.org
Open AccessEfficient Waste Management via Tuning Plasma Properties in Radio Frequency Inductively Coupled Plasma
In the last ten years, plasma waste treatment has gained increasing prominence as a technology in response to growing challenges in waste disposal and the recognition of opportunities for generating valuable by-products. The efficiency and outcomes of this process are intricately linked to the characteristics of the plasma involved, such as plasma enthalpy and heat flux. We employed an experimental radio frequency inductively coupled plasma (RF-ICP) torch operating at atmospheric pressure to generate plasma. Utilizing optical emission spectroscopy (OES), we measured plasma parameters, specifically the effective electron temperature (Teff) and plasma density (ne), while varying argon gas flow rates and RF powers. Our investigations revealed that both flow rate and RF power exert significant control over plasma parameters, and we observed an unusual phenomenon within this range of discharge pressures. Consequently, both the plasma's enthalpy and the heat flux it generates are influenced by variations in both flow rate and RF power.
- Open Access
- 2 August 2023
- Published by MDPI AG in Preprints.org
Optical Characterization of RF Plasma Torch for Municipal Solid Waste (MSW) Treatment Process
Over the past decade, plasma waste treatment has become a more prominent technology due to increasing problems with waste disposal and realizing opportunities to generate valuable co-products. Plasma waste treatment extensively uses atmospheric pressure (RF) inductive coupled plasma (ICP) torches. In situ Optical Emission Spectroscopy (OES) is used to evaluate the developed RF ICP torch for Municipal Solid Waste (MSW) treatment and ascertain the plasma parameters to understand the physical mechanism involved. The argon plasma jet's electron temperature and plasma density outside the torch chamber are calculated using the Boltzmann plot and Stark broadening at different gas flow rates, and RF power. The expected electron temperature and plasma density behaviour were observed at a low gas flow rate. The electron temperature decreases with the RF power from 8089 K to 6097 K as demand for increasing the plasma density. An energy loss mechanism was revealed while raising the gas flow rate, as the electron temperature increases with RF power from 5750 K to 6221 K, and the plasma density decreases. This behaviour is due to the anomalous skin effect. Detecting and avoiding this phenomenon is essential as it negatively affects torch energy efficiency and waste treatment.
- 2 August 2023
- Published by MDPI AG in Preprints.org
Open AccessOptical Characterization of RF Plasma Torch for Municipal Solid Waste (MSW) Treatment Process
Over the past decade, plasma waste treatment has become a more prominent technology due to increasing problems with waste disposal and realizing opportunities to generate valuable co-products. Plasma waste treatment extensively uses atmospheric pressure (RF) inductive coupled plasma (ICP) torches. In situ Optical Emission Spectroscopy (OES) is used to evaluate the developed RF ICP torch for Municipal Solid Waste (MSW) treatment and ascertain the plasma parameters to understand the physical mechanism involved. The argon plasma jet's electron temperature and plasma density outside the torch chamber are calculated using the Boltzmann plot and Stark broadening at different gas flow rates, and RF power. The expected electron temperature and plasma density behaviour were observed at a low gas flow rate. The electron temperature decreases with the RF power from 8089 K to 6097 K as demand for increasing the plasma density. An energy loss mechanism was revealed while raising the gas flow rate, as the electron temperature increases with RF power from 5750 K to 6221 K, and the plasma density decreases. This behaviour is due to the anomalous skin effect. Detecting and avoiding this phenomenon is essential as it negatively affects torch energy efficiency and waste treatment.