Denis D. Chirkov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Denis D. Chirkov has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Iliya I. Butorin
Department of Organic and Biomolecular Chemistry, Ural Federal University, 620002 Yekaterinburg, Russia
2 shared publications - Oleg S. Eltsov
Institute of Chemical Engineering, Ural Federal University, 620062 Ekaterinburg, Russian Federation
2 shared publications - Pavel A. Slepukhin
Ural Federal University, Yekaterinburg, Russia
2 shared publications - Vladimir L. Rusinov
Ural Federal University named after the first President of Russia B.N.Yeltsin, Ekaterinburg, Russian Federation
2 shared publications - Aleksey E. Shkuro
Уральский государственный лесотехнический университет, Екатеринбург, Россия
1 shared publication - Alesya Valer'Yevna Vurasko
Уральский государственный лесотехнический университет
1 shared publication
Latest Publications
- Open Access
- 1 May 2026
- Published by Ural Federal University in Chimica Techno Acta
- Vol. 13 (2) , 9856
Features of the synthesis of 5,7-di(het)aryltriazolo[1,5-a]pyrimidine derivatives
To date, the synthesis of 5,7-di(het)arylazolo[1,5-a]pyrimidines, including 6-nitro-substituted derivatives, is represented by a limited number of original studies. To expand the synthetic approaches in this field of azaheterocyclic chemistry, we have developed a universal method for the preparation of 5,7-di(het)aryl-6-nitro-4,5,6,7-tetrahydro[1,2,4]triazolo[1,5-a]pyrimidines and the corresponding 6-unsubstituted 5,7-di(hetero)aryl[1,2,4]triazolo[1,5-a]pyrimidines using imines and nitrostyrenes as starting reagents. It was shown that the reaction of 3-substituted-(E)-1-(4-nitrophenyl)-N-(1H-1,2,4-triazol-5-yl)methanimines (1) with nitrostyrene derivatives (2) in acetonitrile and one equivalent of NEt3 results in the products of denitration-aromatization – 7-(het)aryl-2-(methylthio)-5-(4-nitrophenyl)-[1,2,4]triazolo[1,5-a]pyrimidines (3). This process of nitro group elimination with concomitant aromatization is also observed for 5,7-di(het)aryl-6-nitro-4,5,6,7-tetrahydro[1,2,4]triazolo[1,5-a]pyrimidines and depends on the electronegativity of the substituent at the C-5 atom, the nature of the basic or acidic activators used, and the solvent. A series of experiments were conducted to establish the mechanism of nitro group elimination using 4,5,6,7-tetrahydro-[1,2,4]triazolo[1,5-a]pyrimidine (6a) as the starting reagent. During the study, the nitro group reduction product – 7-(4-methoxyphenyl)-2-(methylthio)-5-(pyridin-3-yl)-[1,2,4]triazolo[1,5-a]pyrimidin-6-amine (8) was obtained.
- 1 May 2026
- Published by Ural Federal University in Chimica Techno Acta
- Vol. 13 (2) , 9856
Open AccessFeatures of the synthesis of 5,7-di(het)aryltriazolo[1,5-a]pyrimidine derivatives
To date, the synthesis of 5,7-di(het)arylazolo[1,5-a]pyrimidines, including 6-nitro-substituted derivatives, is represented by a limited number of original studies. To expand the synthetic approaches in this field of azaheterocyclic chemistry, we have developed a universal method for the preparation of 5,7-di(het)aryl-6-nitro-4,5,6,7-tetrahydro[1,2,4]triazolo[1,5-a]pyrimidines and the corresponding 6-unsubstituted 5,7-di(hetero)aryl[1,2,4]triazolo[1,5-a]pyrimidines using imines and nitrostyrenes as starting reagents. It was shown that the reaction of 3-substituted-(E)-1-(4-nitrophenyl)-N-(1H-1,2,4-triazol-5-yl)methanimines (1) with nitrostyrene derivatives (2) in acetonitrile and one equivalent of NEt3 results in the products of denitration-aromatization – 7-(het)aryl-2-(methylthio)-5-(4-nitrophenyl)-[1,2,4]triazolo[1,5-a]pyrimidines (3). This process of nitro group elimination with concomitant aromatization is also observed for 5,7-di(het)aryl-6-nitro-4,5,6,7-tetrahydro[1,2,4]triazolo[1,5-a]pyrimidines and depends on the electronegativity of the substituent at the C-5 atom, the nature of the basic or acidic activators used, and the solvent. A series of experiments were conducted to establish the mechanism of nitro group elimination using 4,5,6,7-tetrahydro-[1,2,4]triazolo[1,5-a]pyrimidine (6a) as the starting reagent. During the study, the nitro group reduction product – 7-(4-methoxyphenyl)-2-(methylthio)-5-(pyridin-3-yl)-[1,2,4]triazolo[1,5-a]pyrimidin-6-amine (8) was obtained.
- 26 September 2025
- Published by Wiley in Magnetic Resonance in Chemistry
- Vol. 64 (1) , 34-46
Synthesis and Evidence for the Stereo/Region‐Specific Structure of 5,7‐Di(het)aryl‐4,5,6,7‐tetrahydro‐6‐nitroazolo[1,5‐ a ]pyrimidines
The series of new 2‐substituted‐5,7‐di(het)aryl‐6‐nitro‐4,5,6,7‐tetrahydroazolo[1,5‐ a ]pyrimidines were synthesized by reaction between imine and 1‐substituted 2‐nitroethylene derivatives. The structure of the obtained compounds including stereochemical configuration was confirmed by NMR techniques such as 1 H, 13 C, 2D 1 H‐ 1 H (gNOESY), 1 H‐ 13 C (gHSQC, gHMBC) 2D 1 H‐ 15 N gHMBC and XRD method, additionally. For the obtained compounds, the signals of all hydrogen, carbon, and nitrogen nuclei in the NMR spectra were associated using two‐dimensional NMR experiments. Based on the analysis of the spin–spin coupling constants (SSCC), it was found that the target compounds were obtained in the form of trans ‐ trans isomers.
- 26 September 2025
- Published by Wiley in Magnetic Resonance in Chemistry
- Vol. 64 (1) , 34-46
Synthesis and Evidence for the Stereo/Region‐Specific Structure of 5,7‐Di(het)aryl‐4,5,6,7‐tetrahydro‐6‐nitroazolo[1,5‐ a ]pyrimidines
The series of new 2‐substituted‐5,7‐di(het)aryl‐6‐nitro‐4,5,6,7‐tetrahydroazolo[1,5‐ a ]pyrimidines were synthesized by reaction between imine and 1‐substituted 2‐nitroethylene derivatives. The structure of the obtained compounds including stereochemical configuration was confirmed by NMR techniques such as 1 H, 13 C, 2D 1 H‐ 1 H (gNOESY), 1 H‐ 13 C (gHSQC, gHMBC) 2D 1 H‐ 15 N gHMBC and XRD method, additionally. For the obtained compounds, the signals of all hydrogen, carbon, and nitrogen nuclei in the NMR spectra were associated using two‐dimensional NMR experiments. Based on the analysis of the spin–spin coupling constants (SSCC), it was found that the target compounds were obtained in the form of trans ‐ trans isomers.
- 1 August 2023
- Published by M.V. Lomonosov Northern (Arctic) Federal University in Lesnoy Zhurnal (Forestry Journal)
- No. 3,p. 155-168
Deriving Biocomposites of Polymer Phase Plasticised Cellulose Acetates with Varying Degrees of Acetylation
It is anticipated that the creation of wood-polymer composites (WPC) made of naturally renewable polymers and their derivatives (biocomposites) would have a significant practical use due to the rise in prices for synthetic thermoplastic polymers derived from oil and gas. Furthermore, the necessity to replace synthetic polymers such as polyethylene, polypropylene, polyvinyl chloride, and others as components of composite materials is also associated with environmental hazards caused by their low degradation rate in the natural media (soil, water, and air). A further problem for manufacturers of WPC is the legislative requirement for autonomous neutralisation of production waste. One of the potential materials for practical application in the production of WPC are binders based on plasticised cellulose acetates. Russian and foreign scientists have studied the influence of the degree of acetylation of cellulose acetate on the properties of polymeric materials that do not contain lignocellulose fillers. There is no information found concerning the secondary use of cellulose acetate waste for the production of WPC. This article presents the results of an investigation into the hot pressing of biocomposites with a polymer phase of plasticised cellulose acetates of varying degrees of acetylation and fillers: wood flour and waste acetate photographic film. An experimental and statistical dependence of the effect of the degree of acetylation of cellulose acetate and filler content in the biocomposite on its properties was developed, sufficient to exceed a confidence level of 0.9. The experimental specifications included decomposition in activated soil, water absorption, bending strength, Brinell hardness, etc. Some test results showed that the derived biocomposites have the same level of properties as the reference WPC, which consists of a high-density polyethylene phase with a wood flour content of 50 %. The derived dependencies allow us to predict changes in the properties of biocomposites at different degrees of acetylation of plasticised cellulose acetate and filler content. Moreover, they solve the problem of choosing the optimal chemical combination for WPC for manufacturing a specific product by hot pressing. For citation: Shkuro A.E., Glukhikh V.V., Usova K.A., Chirkov D.D., Zakharov P.S., Vurasko A.V. Deriving Biocomposites of Polymer Phase Plasticised Cellulose Acetates with Varying Degrees of Acetylation. Lesnoy Zhurnal = Russian Forestry Journal, 2023, no. 4, pp. 155–168. (In Russ.). https://doi.org/10.37482/0536-1036-2023-4-155-168
- 1 August 2023
- Published by M.V. Lomonosov Northern (Arctic) Federal University in Lesnoy Zhurnal (Forestry Journal)
- No. 3,p. 155-168
Deriving Biocomposites of Polymer Phase Plasticised Cellulose Acetates with Varying Degrees of Acetylation
It is anticipated that the creation of wood-polymer composites (WPC) made of naturally renewable polymers and their derivatives (biocomposites) would have a significant practical use due to the rise in prices for synthetic thermoplastic polymers derived from oil and gas. Furthermore, the necessity to replace synthetic polymers such as polyethylene, polypropylene, polyvinyl chloride, and others as components of composite materials is also associated with environmental hazards caused by their low degradation rate in the natural media (soil, water, and air). A further problem for manufacturers of WPC is the legislative requirement for autonomous neutralisation of production waste. One of the potential materials for practical application in the production of WPC are binders based on plasticised cellulose acetates. Russian and foreign scientists have studied the influence of the degree of acetylation of cellulose acetate on the properties of polymeric materials that do not contain lignocellulose fillers. There is no information found concerning the secondary use of cellulose acetate waste for the production of WPC. This article presents the results of an investigation into the hot pressing of biocomposites with a polymer phase of plasticised cellulose acetates of varying degrees of acetylation and fillers: wood flour and waste acetate photographic film. An experimental and statistical dependence of the effect of the degree of acetylation of cellulose acetate and filler content in the biocomposite on its properties was developed, sufficient to exceed a confidence level of 0.9. The experimental specifications included decomposition in activated soil, water absorption, bending strength, Brinell hardness, etc. Some test results showed that the derived biocomposites have the same level of properties as the reference WPC, which consists of a high-density polyethylene phase with a wood flour content of 50 %. The derived dependencies allow us to predict changes in the properties of biocomposites at different degrees of acetylation of plasticised cellulose acetate and filler content. Moreover, they solve the problem of choosing the optimal chemical combination for WPC for manufacturing a specific product by hot pressing. For citation: Shkuro A.E., Glukhikh V.V., Usova K.A., Chirkov D.D., Zakharov P.S., Vurasko A.V. Deriving Biocomposites of Polymer Phase Plasticised Cellulose Acetates with Varying Degrees of Acetylation. Lesnoy Zhurnal = Russian Forestry Journal, 2023, no. 4, pp. 155–168. (In Russ.). https://doi.org/10.37482/0536-1036-2023-4-155-168