HTHao Teng

Hao Teng

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Hao Teng has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Disturbance Refined Separation-Based Composite Control for Airborne Electro-Optical Gimbals Subject to Pointing Constraints

    by Jiaao Wu, Yixuan Zhang, Yaokun Lu, Hao Teng, Pengwei Hu, Jianzhong Qiao

    Maintaining high-precision line-of-sight pointing in airborne electro-optical gimbals remains a significant challenge due to the simultaneous presence of heterogeneous disturbances and strict mechanical structural constraints within complex dynamic conditions. Traditional anti-disturbance methods often struggle to provide fine-grained compensation for multi-source uncertainties where low-frequency lumped disturbances (e.g., friction and unbalanced torques) and high-frequency harmonic vibrations (e.g., engine-induced vibrations and aerodynamic gusts) are intricately coupled. To address these challenges, this paper proposes a refined disturbance separation-based composite control scheme. First, a deep-coupled aircraft–gimbal dynamics model is constructed to reveal the spectral separation characteristics of multi-source disturbances under the “moving base” effect. Second, a Refined Disturbance Observer architecture is developed by coupling an Extended State Observer with a Harmonic Disturbance Observer, enabling the decoupled separation and precise estimation of heterogeneous disturbances based on their spectral characteristics. Furthermore, a finite-time composite controller incorporating a Barrier Lyapunov Function is designed to guarantee that the system output strictly adheres to inherent mechanical structural boundaries. Numerical simulations confirm high-precision tracking and strict constraint satisfaction of the scheme.

  • Strength Quantification Composite Control for Flexible Satellites With Prescribed Performance

    by Yongjian Yang, Yukai Zhu, Hao Teng, Jianzhong Qiao

    Attitude control performance under multiple disturbances is essential for flexible satellites to accomplish various missions, while the magnitude and rate of control signals (control strength) are also crucial for ensuring a long-term operation. In this article, a strength quantification composite control (SQCC) scheme, consisting of an extended refined disturbance observer (ERDO) and a prescribed performance controller (PPC), is proposed to meet the requirements of control performance and strength. First, a deep-coupled system model is constructed for satellites encompassing flexible dynamics and external disturbances. Then, based on an introduced exogenous disturbance system, the ERDO is proposed, utilizing partially known dynamics (e.g., vibration and polynomial) and parameters (e.g., damping ratios and frequencies), enabling accurate estimation of both flexible vibrations and external disturbances. Combining the ERDO and PPC, the SQCC scheme can achieve prescribed control performance and prequantified control strength simultaneously. Finally, numerical simulations and experimental studies demonstrate the efficacy of the proposed method.


  • Refined Disturbance Utilization-Based Green Control for Spacecraft With Composite Actuator Disturbances

    by Hao Teng, Yaokun Lu, Pengfei Xia, Jianzhong Qiao, Lei Guo

    As the actuator of spacecraft, reaction wheels inevitably exist multiple input disturbances, such as axle friction. These disturbances are coupled with system inputs and exhibit strong composite characteristic, which significantly affect the control quality of spacecraft. To overcome the negative impact of composite disturbances, this article proposes a refined disturbance utilization-based green control scheme, focusing on the disturbance separation, estimation, and utilization. First, a deep coupled model of the spacecraft based on the reaction wheel dynamic is established, effectively separating composite disturbances according to their influence topology. Second, to effectively estimate composite disturbances, refined sliding-mode disturbance observer and adaptive sliding-mode disturbance observer are, respectively, designed based on the characteristics of the separated disturbances. Subsequently, in an effort to assess the beneficial or harmful effects of composite disturbances, disturbance discrimination operators are designed by utilizing the impact of disturbances on the system convergence. Combining the dual disturbance observers and the disturbance discrimination operators, a refined disturbance utilization-based green controller is finally constructed to compensate for harmful disturbances and utilize beneficial disturbances. Simulation and experiment validate the effectiveness of the proposed scheme, which demonstrates the characteristics of high-precision and low-energy consumption.


  • Input Excitation Disturbance Separation-Based Energy-Saving Attitude Control for Flexible Spacecraft With Actuator Degradation

    by Yukai Zhu, Yan Meng, Hao Teng, Yangyang Cui, Haipeng Chen

    Actuator degradation (i.e., partial loss of effectiveness) of flexible spacecraft is multiplicatively coupled with the control input and mixed with the flexible vibration disturbance. How to accurately identify and compensate these disturbances is a key to improve the attitude control performances. This article studies the high-precision and energy-saving attitude control of flexible spacecraft in the presence of composite disturbances including actuator degradation, actuator bias, and flexible vibration disturbance. A refined deep-coupled attitude dynamic model is established to clearly reveal the inherent coupling relations among angular velocity, control input, and composite disturbances. In the first phase, a novel input excitation disturbance observer (IEDO) is proposed to separate the composite disturbances, and then a parameter identification method is designed to identify the parameters of actuator degradation and bias. Due to the accurate separation ability of IEDO, the parameter identification performance will not be affected by the flexible vibration disturbance. In the second phase, a sliding mode observer is designed to estimate the flexible vibration disturbance and parameter identification error, and then an energy-saving composite attitude control law is proposed by accurately compensating the composite disturbances. Finally, numerical results and experiment results are given to demonstrate the effectiveness of the proposed methods.


  • Deep-Coupled Sliding Mode Disturbance Observer-Based Composite Attitude Control for Flexible Communication Spacecrafts

    by Zeyu Bao, Yukai Zhu, Hao Teng, Yangyang Cui, Lei Guo

    Multifrequency flexible vibration generated from solar arrays and deployable antennas has become the dominant disturbance source for communication spacecrafts with high precision, high stability, and fast-response attitude control requirements. Thereby, focusing on the accurate and rapid rejection of flexible vibration disturbance, a deep-coupled sliding mode disturbance observer (DO)-based composite attitude control scheme is proposed in this article for flexible communication spacecrafts. First, the dynamic of flexible vibration disturbance has been fully excavated and described by a recessive model, overcoming the conservativeness of derivative-bounded assumption in traditional methods. Second, a novel deep-coupled sliding mode DO with finite-time convergence and adaptive parameter estimation capabilities is proposed to estimate the flexible vibration disturbance, where the disturbance model has been fully utilized. Then, based on the output of deep-coupled sliding mode DO, a composite attitude control law is proposed by combining a finite-time backstepping control. Unified stability analysis has been conducted by combining the observer dynamic and attitude control dynamic. Finally, numerical simulation and experiment verification are respectively carried out to show the performances of the proposed method.


  • Composite Attitude Tracking Control for Launch Vehicles Subject to Actuator Degradation Fault and Multiple Disturbances

    by Hao Teng, Yukai Zhu, Jianzhong Qiao, Xiuming Yao, Lei Guo

    The safety and high-precision attitude control of launch vehicles are threatened by degradation fault and multiple disturbances (such as model uncertainty, uncertain inertia, and external disturbance) during the reentry stage. To address these challenges, an adaptive sliding mode observer (ASMO)-based composite control scheme is proposed in this article for launch vehicles to achieve simultaneous compensation and suppression of the degradation fault and multiple disturbances. Since the mismatched model uncertainty that coupled with the system state exhibits strong uncertainty, an ASMO is designed to estimate it by adaptively learning the upper bound of the derivative of the mismatched model uncertainty. In order to attenuate the effect of the degradation fault, uncertain inertia, and external disturbance, three adaptive laws are accordingly designed to identify them online. By combining the ASMO and the designed adaptive laws, a composite controller is constructed, and the degradation fault and multiple disturbances are simultaneously compensated and suppressed. The coordinated optimization performance and refinement of antidisturbance control and fault-tolerant control are effectively enhanced. Moreover, by introducing a prescribed performance function, the attitude tracking error response is constrained within a predefined range. Simulation and experiments validate the effectiveness of the proposed scheme.


  • Deep Coupled Alignment Control for Spacecrafts With Composite Disturbances and Mandatory Pointing Constraint

    by Hao Teng, Yongjian Yang, Jianzhong Qiao, Yukai Zhu, Lei Guo

    The high-precision alignment of spacecrafts subject to multiple composite disturbances [e.g., axle frictions and back electromotive force (EMF)] and mandatory pointing constraints is an extremely challenging issue for both theoretically and practically. To address this challenge, a refined deep coupled alignment control scheme is proposed in this article. First, a deep coupled alignment model of spacecraft based on the dynamics of the reaction wheel actuator is established, which reveals the influence of the composite disturbances, such as the axle frictions and the back EMF on the system, and separates the composite disturbances into mismatched and matched disturbance according to the affected channels. Second, in view of the characteristics of the composite disturbances, heterogeneous sliding mode disturbance observers (SMDOs) are designed to estimate them accordingly. Then, in order to cope with the mandatory pointing constrains, barrier functions are introduced to convert the alignment errors to limit their variation range. Finally, combined with heterogeneous SMDOs and conversion errors, a composite refined controller is constructed to finely compensate the composite disturbances in the alignment system. High-precision control performance is achieved and the mandatory pointing requirement is satisfied. Simulations and experiments verify the effectiveness of the proposed scheme.