Zhangxiang Hao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Zhangxiang Hao has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Junrun Feng
School of Science School of Chip Industry Hubei University of Technology Wuhan Hubei China
11 shared publications Zhuo Chen
School of Science, School of Chip Industry, Hubei University of Technology, Wuhan, Hubei 430068, China
9 shared publications- Feng Ryan Wang
Department of Chemical Engineering, University College London, London, UK
7 shared publications Lin Sheng
School of Mechanical and Electronic Engineering, Suzhou University, Suzhou, Anhui 234000, China
6 shared publicationsLun Zhang
Materials and Catalysis Laboratory Department of Chemical Engineering University College London London UK
6 shared publicationsWeihua Zhou
School of Science, School of Chip Industry, Hubei University of Technology, Wuhan, Hubei 430068, China
6 shared publications
Latest Publications
- Open Access
- 8 October 2026
- Published by Wiley in Batteries & Supercaps
- Vol. 9 (10) , e70502
Binder Engineering in Sulfide‐Based All‐Solid‐State Batteries: Mechanical Resilience, Chemical Compatibility, and Transport Regulation
Sulfide‐based all‐solid‐state batteries (ASSBs) are promising next‐generation energy‐storage systems owing to their high ionic conductivity, favorable deformability, and compatibility with high‐energy electrodes. Replacing liquid electrolytes with solid ion conductors fundamentally changes electrode operation from liquid‐mediated wetting to contact‐dependent solid‐state transport. Consequently, polymer binders are no longer passive adhesives but multifunctional interphases that maintain solid–solid contact, regulate stress evolution, stabilize interfaces, and preserve ion/electron transport pathways. This review summarizes recent advances in binder engineering for sulfide‐based ASSBs from the perspectives of mechanical resilience, chemical compatibility, and transport regulation. We first discuss the key failure mechanisms governing binder design, including contact loss, stress accumulation, interfacial degradation, solvent incompatibility, and transport obstruction. Representative strategies are then reviewed, including elastic and stress‐dissipating binders, dynamic and mechanically adaptive networks, polarity‐regulated and solvent‐compatible architectures, postactivated adhesive binders, and ion‐conductive binders. Finally, we propose a multidimensional evaluation framework based on cycling durability, cell operating‐voltage range, cathode chemistry, and testing conditions. By redefining binders as multifunctional mechano‐chemical‐transport regulators, this review provides design principles for linking molecular binder engineering with practical sulfide‐based ASSB manufacturing and operation.
- 8 October 2026
- Published by Wiley in Batteries & Supercaps
- Vol. 9 (10) , e70502
Open AccessBinder Engineering in Sulfide‐Based All‐Solid‐State Batteries: Mechanical Resilience, Chemical Compatibility, and Transport Regulation
Sulfide‐based all‐solid‐state batteries (ASSBs) are promising next‐generation energy‐storage systems owing to their high ionic conductivity, favorable deformability, and compatibility with high‐energy electrodes. Replacing liquid electrolytes with solid ion conductors fundamentally changes electrode operation from liquid‐mediated wetting to contact‐dependent solid‐state transport. Consequently, polymer binders are no longer passive adhesives but multifunctional interphases that maintain solid–solid contact, regulate stress evolution, stabilize interfaces, and preserve ion/electron transport pathways. This review summarizes recent advances in binder engineering for sulfide‐based ASSBs from the perspectives of mechanical resilience, chemical compatibility, and transport regulation. We first discuss the key failure mechanisms governing binder design, including contact loss, stress accumulation, interfacial degradation, solvent incompatibility, and transport obstruction. Representative strategies are then reviewed, including elastic and stress‐dissipating binders, dynamic and mechanically adaptive networks, polarity‐regulated and solvent‐compatible architectures, postactivated adhesive binders, and ion‐conductive binders. Finally, we propose a multidimensional evaluation framework based on cycling durability, cell operating‐voltage range, cathode chemistry, and testing conditions. By redefining binders as multifunctional mechano‐chemical‐transport regulators, this review provides design principles for linking molecular binder engineering with practical sulfide‐based ASSB manufacturing and operation.
- 14 September 2026
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 28 (35) , 14297-14306
Anchoring-site distribution engineering via sulfosalicylate surface treatment for durable zinc metal anodes
Anchoring-site distribution engineering via sulfosalicylate molecular regulation stabilizes Zn interfaces and enables durable aqueous zinc batteries.
- 14 September 2026
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 28 (35) , 14297-14306
Anchoring-site distribution engineering via sulfosalicylate surface treatment for durable zinc metal anodes
Anchoring-site distribution engineering via sulfosalicylate molecular regulation stabilizes Zn interfaces and enables durable aqueous zinc batteries.
- 5 February 2026
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 28 (11) , 4972-4981
Constructing a Ca-rich protective layer on the anode for high-performance aqueous zinc-ion batteries
A biocompatible calcium-rich protective layer (Ca 10 (OH) 2 (PO 4 ) 6 , CHP) is constructed on zinc anodes, effectively suppressing dendrite growth and side reactions. The Zn@CHP symmetric cell achieves an ultralong lifespan of 1180 h at 5 mA cm −2 .
- 5 February 2026
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 28 (11) , 4972-4981
Constructing a Ca-rich protective layer on the anode for high-performance aqueous zinc-ion batteries
A biocompatible calcium-rich protective layer (Ca 10 (OH) 2 (PO 4 ) 6 , CHP) is constructed on zinc anodes, effectively suppressing dendrite growth and side reactions. The Zn@CHP symmetric cell achieves an ultralong lifespan of 1180 h at 5 mA cm −2 .
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Nanoscale
A calcium oxalate protective interphase for regulated zinc deposition in aqueous batteries
A facile CaC 2 O 4 coating stabilizes Zn anodes through persistent interfacial protection and Zn 2+ transport regulation. Reduced activation energy and suppressed side reactions enable durable aqueous Zn-ion batteries.
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Nanoscale
A calcium oxalate protective interphase for regulated zinc deposition in aqueous batteries
A facile CaC 2 O 4 coating stabilizes Zn anodes through persistent interfacial protection and Zn 2+ transport regulation. Reduced activation energy and suppressed side reactions enable durable aqueous Zn-ion batteries.
- Open Access
- 13 October 2025
- Published by Wiley in ChemSusChem
- Vol. 18 (23) , e202501033
NCM811–Sulfide Electrolyte Interfacial Degradation Mechanisms and Regulation Strategies in All‐Solid‐State Lithium Battery
The all‐solid‐state lithium battery (ASSLB) with LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811) cathode and sulfide solid‐state electrolyte (SSE) represents a transformative technology, offering enhanced safety and high energy density through the complete elimination of flammable liquid electrolyte and enabling the lithium metal anode. However, its commercialization is fundamentally limited by complex instabilities at the NCM811/sulfide SSE interface, which trigger coupled mechanical, chemical, and electrochemical degradation. The solid/solid interface creates complex dynamic feedback loops: mechanical stress from anisotropic volume changes accelerates interfacial chemical reactions; chemical degradation progressively alters electrochemical behavior; and continuous electrochemical cycling induces further mechanical instability. This multiscale coupling manifests as progressive contact loss, microcracks, detrimental space charge layer, and impedance growth, which collectively compromise performance under demanding conditions. This review establishes a coherent mechanistic framework to understand these highly interdependent degradation pathways, and systematically evaluates various stabilization strategies, including targeted surface modification, strategic bulk engineering, and innovative synergistic design approaches that specifically address the inherently coupled interface instability. Despite progress, intrinsic material incompatibilities persist, necessitating breakthroughs in materials design, interface engineering, characterization, and manufacturing. This work provides fundamental mechanistic insights into solid‐state electrochemistry and practical guidance for developing commercially viable ASSLB.
- 13 October 2025
- Published by Wiley in ChemSusChem
- Vol. 18 (23) , e202501033
Open AccessNCM811–Sulfide Electrolyte Interfacial Degradation Mechanisms and Regulation Strategies in All‐Solid‐State Lithium Battery
The all‐solid‐state lithium battery (ASSLB) with LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811) cathode and sulfide solid‐state electrolyte (SSE) represents a transformative technology, offering enhanced safety and high energy density through the complete elimination of flammable liquid electrolyte and enabling the lithium metal anode. However, its commercialization is fundamentally limited by complex instabilities at the NCM811/sulfide SSE interface, which trigger coupled mechanical, chemical, and electrochemical degradation. The solid/solid interface creates complex dynamic feedback loops: mechanical stress from anisotropic volume changes accelerates interfacial chemical reactions; chemical degradation progressively alters electrochemical behavior; and continuous electrochemical cycling induces further mechanical instability. This multiscale coupling manifests as progressive contact loss, microcracks, detrimental space charge layer, and impedance growth, which collectively compromise performance under demanding conditions. This review establishes a coherent mechanistic framework to understand these highly interdependent degradation pathways, and systematically evaluates various stabilization strategies, including targeted surface modification, strategic bulk engineering, and innovative synergistic design approaches that specifically address the inherently coupled interface instability. Despite progress, intrinsic material incompatibilities persist, necessitating breakthroughs in materials design, interface engineering, characterization, and manufacturing. This work provides fundamental mechanistic insights into solid‐state electrochemistry and practical guidance for developing commercially viable ASSLB.
- Open Access
- 12 September 2025
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 27 (38) , 11561-11580
Electrolyte engineering for low-temperature aqueous batteries: strategies, mechanisms, and perspectives
Low temperatures limit the application of aqueous batteries. This review analyzes electrolyte modifications: concentration engineering, inorganic/organic additives, and gel electrolytes, integrating molecular mechanisms with macroscopic outcomes.
- 12 September 2025
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 27 (38) , 11561-11580
Open AccessElectrolyte engineering for low-temperature aqueous batteries: strategies, mechanisms, and perspectives
Low temperatures limit the application of aqueous batteries. This review analyzes electrolyte modifications: concentration engineering, inorganic/organic additives, and gel electrolytes, integrating molecular mechanisms with macroscopic outcomes.
- 24 June 2025
- Published by Elsevier in Journal of Power Sources
- Vol. 653
Leveraging nano sol properties for enhanced zinc anode performance in aqueous zinc-ion batteries
- 24 June 2025
- Published by Elsevier in Journal of Power Sources
- Vol. 653
Leveraging nano sol properties for enhanced zinc anode performance in aqueous zinc-ion batteries
- 10 April 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (21) , 15951-15960
Improving zinc anodes with a vapor-deposited uniform ultrathin copper layer for enhanced ion distribution and dendrite suppression
Aqueous zinc ion batteries are a promising technology for rechargeable batteries due to their low cost and high safety. However, the interfacial behavior between the zinc anode and the electrolyte often leads to critical issues such as the hydrogen evolution reaction, corrosion, and the formation of zinc dendrites. While protective layers on the zinc anode can improve performance, they may also increase impedance, reduce conductivity, and compromise electric field uniformity. To address these challenges, we developed a novel approach by applying an ultrathin copper (Cu) coating on a zinc anode (Cu@Zn) via a vacuum vapor deposition technique. This method achieves precise nanoscale control over the coating thickness, resulting in a uniform and defect-free protective layer that significantly enhances zinc ion nucleation and effectively suppresses dendrite formation. The symmetric Cu@Zn//Cu@Zn cells cycled over 1200 hours at 5 mA cm−2 and 1 mA h cm−2, surpassing 1000 hours at a high current density of 10 mA cm−2. The full-cell testing conducted at a current density of 1 A g−1 showed a significantly improved cycling stability, with the capacity decay rate reduced from 0.085% to 0.056% per cycle over 1000 charge–discharge cycles. This study presents a viable approach that offers significant potential for advancing battery technology.
- 10 April 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (21) , 15951-15960
Improving zinc anodes with a vapor-deposited uniform ultrathin copper layer for enhanced ion distribution and dendrite suppression
Aqueous zinc ion batteries are a promising technology for rechargeable batteries due to their low cost and high safety. However, the interfacial behavior between the zinc anode and the electrolyte often leads to critical issues such as the hydrogen evolution reaction, corrosion, and the formation of zinc dendrites. While protective layers on the zinc anode can improve performance, they may also increase impedance, reduce conductivity, and compromise electric field uniformity. To address these challenges, we developed a novel approach by applying an ultrathin copper (Cu) coating on a zinc anode (Cu@Zn) via a vacuum vapor deposition technique. This method achieves precise nanoscale control over the coating thickness, resulting in a uniform and defect-free protective layer that significantly enhances zinc ion nucleation and effectively suppresses dendrite formation. The symmetric Cu@Zn//Cu@Zn cells cycled over 1200 hours at 5 mA cm−2 and 1 mA h cm−2, surpassing 1000 hours at a high current density of 10 mA cm−2. The full-cell testing conducted at a current density of 1 A g−1 showed a significantly improved cycling stability, with the capacity decay rate reduced from 0.085% to 0.056% per cycle over 1000 charge–discharge cycles. This study presents a viable approach that offers significant potential for advancing battery technology.
- 14 March 2025
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 27 (15) , 3990-3999
In situ generated tin protective layers from stannous oxalate for dendrite-free zinc anodes
An in-situ generated Sn protective layer on Zn anodes guides Zn (002) deposition and forms the hydrophobic interface. It enables AZIBs to achieve 2300 h stability at 1 mA cm−2 and suppressing dendrite formation through dual-function protection.
- 14 March 2025
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 27 (15) , 3990-3999
In situ generated tin protective layers from stannous oxalate for dendrite-free zinc anodes
An in-situ generated Sn protective layer on Zn anodes guides Zn (002) deposition and forms the hydrophobic interface. It enables AZIBs to achieve 2300 h stability at 1 mA cm−2 and suppressing dendrite formation through dual-function protection.
- 29 October 2024
- Published by Elsevier in Electrochimica Acta
- Vol. 508
Construction of iodine-rich solid electrolyte interphase to achieve highly stable aqueous zinc-ion batteries
- 29 October 2024
- Published by Elsevier in Electrochimica Acta
- Vol. 508
Construction of iodine-rich solid electrolyte interphase to achieve highly stable aqueous zinc-ion batteries