JFJunrun Feng

Junrun Feng

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Junrun Feng has a total of 78 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Direct regeneration of spent LiFePO 4 cathodes: from degradation mechanisms to scalable solutions

    by Lun Ai, Xiaoyan Zhou, Chen Chen, Haohao Wei, Zhengxin Deng, Kunpeng Li, Linna Dai, Xiaohui Li, Jie Ji, Jinlong Cai, et al.

    This review systematically summarizes the mechanistic foundation of LiFePO 4 direct regeneration and quantitatively assesses solid-state, hydrothermal, and electrochemical methods, guiding scalable and sustainable battery recycling.

  • Electrochemically sustained Zn-O coordination resolves a static-working-state interfacial discrepancy in aqueous zinc batteries

    by Linlong Zuo, Junrun Feng, Jinlong Cai, Jian Wang, Guanghan Zhu, Feng Ryan Wang, Zhangxiang Hao

  • Open Access

    Binder Engineering in Sulfide‐Based All‐Solid‐State Batteries: Mechanical Resilience, Chemical Compatibility, and Transport Regulation

    by Lu Xiong, Lun Zhang, Guanghan Zhu, Feng Ryan Wang, Zhangxiang Hao, Junrun Feng

    Sulfide‐based all‐solid‐state batteries (ASSBs) are promising next‐generation energy‐storage systems owing to their high ionic conductivity, favorable deformability, and compatibility with high‐energy electrodes. Replacing liquid electrolytes with solid ion conductors fundamentally changes electrode operation from liquid‐mediated wetting to contact‐dependent solid‐state transport. Consequently, polymer binders are no longer passive adhesives but multifunctional interphases that maintain solid–solid contact, regulate stress evolution, stabilize interfaces, and preserve ion/electron transport pathways. This review summarizes recent advances in binder engineering for sulfide‐based ASSBs from the perspectives of mechanical resilience, chemical compatibility, and transport regulation. We first discuss the key failure mechanisms governing binder design, including contact loss, stress accumulation, interfacial degradation, solvent incompatibility, and transport obstruction. Representative strategies are then reviewed, including elastic and stress‐dissipating binders, dynamic and mechanically adaptive networks, polarity‐regulated and solvent‐compatible architectures, postactivated adhesive binders, and ion‐conductive binders. Finally, we propose a multidimensional evaluation framework based on cycling durability, cell operating‐voltage range, cathode chemistry, and testing conditions. By redefining binders as multifunctional mechano‐chemical‐transport regulators, this review provides design principles for linking molecular binder engineering with practical sulfide‐based ASSB manufacturing and operation.

  • Anchoring-site distribution engineering via sulfosalicylate surface treatment for durable zinc metal anodes

    by Zhangxiang Hao, Linlong Zuo, Jinlong Cai, Jian Wang, Guanghan Zhu, Xin Chen, Feng Ryan Wang, Junrun Feng

    Anchoring-site distribution engineering via sulfosalicylate molecular regulation stabilizes Zn interfaces and enables durable aqueous zinc batteries.

  • Open Access

    Synergy Between Photon‐to‐Phonon Pathway and Active Lattice Oxygen Enables Efficient and Stable Syngas Synthesis

    by Chengzhi Guo, Apoorv Jain, Junrun Feng, Xinyu Li, Xinru Li, Shuya Jia, Juncong Wang, Leirun Chen, Xinjie Luo, Xiaolei Zhang, et al.

    Light‐driven dry reforming of methane (DRM) offers a promising route for syngas synthesis while simultaneously mitigating greenhouse gas emissions of CO 2 and CH 4 . However, the attractive mild‐temperature operating window imposes kinetic constraints on C─H/C═O activation and promotes thermodynamic tendencies for coke formation, resulting in limited efficiency and stability. Herein, manganese oxide (MnO x ) is employed as a multifunctional support to integrate the classic Rh catalytic center, establishing a new benchmark photothermo catalyst for DRM. The system achieves record‐high syngas production rates (H 2 : 948 mmol g −1 h −1 ; CO: 992 mmol g −1 h −1 ) without external heating, alongside exceptional long‐term stability (∼500 h). These production rates and stability also surpass conventional thermocatalysts in similar temperature ranges, with stability exceeding most thermocatalysts by an order of magnitude. Under a separate low‐conversion, high‐gas hourly space velocity (GHSV) protocol, a light‐to‐chemical efficiency (29.5%) can also be reached. MnO x functions as a broadband light harvester, generating a localized thermal field at the micrometre‐scale via an efficient photon‐to‐phonon pathway to facilitate C─H bond activation on Rh. Concurrently, its active lattice oxygen enables a dynamic O L ‐O V cycle for timely removal of C* intermediates and C═O activation. This work underscores the critical role of support engineering in advancing light‐driven DRM.

  • Open Access

    Synergy Between Photon‐to‐Phonon Pathway and Active Lattice Oxygen Enables Efficient and Stable Syngas Synthesis

    by Chengzhi Guo, Apoorv Jain, Junrun Feng, Xinyu Li, Xinru Li, Shuya Jia, Juncong Wang, Leirun Chen, Xinjie Luo, Xiaolei Zhang, et al.

    Light‐driven dry reforming of methane (DRM) offers a promising route for syngas synthesis while simultaneously mitigating greenhouse gas emissions of CO 2 and CH 4 . However, the attractive mild‐temperature operating window imposes kinetic constraints on C─H/C═O activation and promotes thermodynamic tendencies for coke formation, resulting in limited efficiency and stability. Herein, manganese oxide (MnO x ) is employed as a multifunctional support to integrate the classic Rh catalytic center, establishing a new benchmark photothermo catalyst for DRM. The system achieves record‐high syngas production rates (H 2 : 948 mmol g −1 h −1 ; CO: 992 mmol g −1 h −1 ) without external heating, alongside exceptional long‐term stability (∼500 h). These production rates and stability also surpass conventional thermocatalysts in similar temperature ranges, with stability exceeding most thermocatalysts by an order of magnitude. Under a separate low‐conversion, high‐gas hourly space velocity (GHSV) protocol, a light‐to‐chemical efficiency (29.5%) can also be reached. MnO x functions as a broadband light harvester, generating a localized thermal field at the micrometre‐scale via an efficient photon‐to‐phonon pathway to facilitate C─H bond activation on Rh. Concurrently, its active lattice oxygen enables a dynamic O L ‐O V cycle for timely removal of C* intermediates and C═O activation. This work underscores the critical role of support engineering in advancing light‐driven DRM.

  • Mechanism-Driven Physical Vapor Deposition Interface Engineering for Stable Metal Anodes

    by Jun Wang, Yuang He, Weihua Zhou, Junrun Feng, Ziming Wan, Haoyu Feng, Xin Chen, Feng Ryan Wang, Zhangxiang Hao


  • Advanced Etching Strategies for Microstructural Control and Performance Enhancement in Metal–Ion Batteries

    by Ziming Wan, Haoyu Feng, Jinlong Cai, Junrun Feng, Gangqiang Ding, Zhangxiang Hao

    Etching technology, an advanced method for precise micro‐/nanostructuring, demonstrates significant potential in addressing critical challenges in high‐energy‐density batteries, such as electrode structural degradation and increasing interfacial impedance. Categorized into dry and wet etching based on their underlying mechanisms, these techniques facilitate selective material removal, enabling precise control over the morphology, crystal structure, and chemical state of electrodes, electrolytes, and interfaces. Owing to its high precision, 3D processing capability, and minimal damage to intrinsic material properties, etching serves as a powerful tool for realizing sophisticated structural designs. Despite its maturity in microelectronics, a systematic review of etching techniques for battery components is still lacking. To bridge this gap, we provide the first systematic examination of etching techniques for tailoring the microstructures of all four core battery components: cathodes, anodes, separators/solid‐state electrolytes, and current collectors. Specifically, we discuss their application strategies, underlying mechanisms, and design principles. Through case studies, it highlights the unique advantages of etching in mitigating issues like volume variation, dendrite growth, sluggish ion transport, and interfacial instability. Ultimately, this review aims to deepen the understanding of etching's role in battery microstructure control and to provide novel technical pathways and foundations for designing next‐generation batteries with enhanced performance and stability.

  • Constructing a Ca-rich protective layer on the anode for high-performance aqueous zinc-ion batteries

    by Lun Zhang, Zhuo Chen, Junrun Feng, Hao Gu, Lin Sheng, Zhangxiang Hao, Feng Ryan Wang

    A biocompatible calcium-rich protective layer (Ca 10 (OH) 2 (PO 4 ) 6 , CHP) is constructed on zinc anodes, effectively suppressing dendrite growth and side reactions. The Zn@CHP symmetric cell achieves an ultralong lifespan of 1180 h at 5 mA cm −2 .


  • A calcium oxalate protective interphase for regulated zinc deposition in aqueous batteries

    by Zhou Fang, Lun Zhang, Weihua Zhou, Junrun Feng, Zhuo Chen, Ziming Wan, Haoyu Feng, Lin Sheng, Zhuo Peng, Wenyuan Zhang, et al.

    A facile CaC 2 O 4 coating stabilizes Zn anodes through persistent interfacial protection and Zn 2+ transport regulation. Reduced activation energy and suppressed side reactions enable durable aqueous Zn-ion batteries.