JWJingkai Wang

Jingkai Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jingkai Wang has a total of 8 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Theoretical and Experimental Study on Homologous Acoustic Emission Signal Recognition Based on Synchrosqueezed Wavelet Transform Coherence

    by Jingkai Wang, Linsheng Huo, Chunguang Liu, Gangbing Song

    The acoustic emission (AE) technique has been widely investigated for its ability to locate damage in structures. However, the selection of the arrival point of AE signals and the existence of nonhomologous AE signals can significantly affect the location accuracy of damages. The synchrosqueezed wavelet transform (SWT) was used in our previous research to pick the accurate arrival point, but the existence of the nonhomologous signals was neglected in the picking process. To address this limitation, the synchrosqueezed wavelet transform coherence (SWTC) method is proposed to improve the accuracy by recognizing homologous signals and suppressing the spectral leakage in this paper. Compared with the wavelet transform coherence (WTC) method previously used, the SWTC method using the squeezing wavelet coefficients obtained by the SWT can constitute a more explicit coherence graph of AE signals. This clear coherence graph can help reduce the effect of subjective factors in observing the coherence and improve the recognition accuracy of homologous signals. The effectiveness of the proposed method is experimentally verified on a steel pipe and a concrete beam. The results demonstrate that the SWTC accurately identifies homologous AE signals and effectively improves the localization accuracy across different signal densities, localization distances, and materials.


  • Open Access

    Investigation of Bonding Behavior of FRP and Steel Bars in Self-Compacting Concrete Structures Using Acoustic Emission Method

    by Bo Di, Jingkai Wang, Haotian Li, Jinhang Zheng, Yu Zheng, Gangbing Song

    To extend understanding of the bonding behavior of fiber reinforced polymer (FRP) and steel bars in self-compacting concrete (SCC), an experimental series consisting of 36 direct pull-out tests monitored by acoustic emission (AE) were performed in this paper. The test variables involved rebar type, bar diameter, embedded length, and polypropylene (PP) fiber volume content. For each test, the pull-out force and free end slip were continuously measured and compared with the corresponding AE signals. It was found that the proposed AE method was effective in detecting the debonding process between the FRP/steel bars and the hosting concrete. The AE signal strength exhibited a good correlation with the actual bond stress-slip relationship measured in each specimen. Based on the AE location technique, the invisible non-uniform distribution of bonding stress along the bar was further revealed, the initial location of damage and the debonding process were captured. Additionally, the contribution of bar-to-concrete load-bearing mechanism (chemical adhesion, friction, and mechanical interlocking) to sustain the pull-out force was effectively clarified by studying the collected signals in the frequency domain of AE methods. The experimental results demonstrate that the proposed AE method has potential to detect the debonding damage of FRP/steel bar reinforced SCC structures accurately.


  • Open Access

    Wear Degree Quantification of Pin Connections Using Parameter-Based Analyses of Acoustic Emissions

    by Jingkai Wang, Linsheng Huo, Chunguang Liu, Gangbing Song

    Pin connections are commonly used in many engineering fields, and continuous operation may cause severe wear on the pins and may lead to their eventual fracture, if undetected. However, a reliable nonintrusive real-time method to monitor the wear of pin connections is yet to be developed. In this paper, acoustic emission (AE)-based parametric analysis methods, including the logarithm of the cumulative energy (LAE), the logarithm of the slope of cumulative energy (LSCE), the b-value method, the Ib-value method, and the fast Fourier transformation (FFT), were developed to quantify the wear degree of pin connections. The b-value method offers a criterion to quickly judge whether severe wear occurs on a pin connection. To assist the research, an experimental apparatus to accelerate wear test of pin connections was designed and fabricated. The AE sensor, mounted on the test apparatus in a nondestructive manner, is capable of real-time monitoring. The micrographs of the wear of pins, and the surface roughness of pins, verified that the values of the max LAE and the max LSCE became larger as the wear degree of pin connections increased, which means different values of the max LAE and the max LSCE can reflect different wear degree of pin connections. Meanwhile, the results of the micrographs and surface roughness confirmed that the b-value is an effective method to identify severe wear, and the value “1” can be used as a criterion to detect severe damage in different structures. Furthermore, the results of spectrum analysis in the low frequency range showed that the wear frequency was concentrated in the range of 0.01 to 0.02 MHz for the pin connection. This study demonstrated that these methods, developed based on acoustic emission technique, can be utilized in quantifying the wear degree of pin connections in a nondestructive way.


  • Open Access

    Feasibility Study of Real-Time Monitoring of Pin Connection Wear Using Acoustic Emission

    by Jingkai Wang, Linsheng Huo, Chunguang Liu, Yuanchen Peng, Gangbing Song

    Pin connections are one of the most important connecting forms and they have been widely used in engineering fields. In its service, pin connections are subject to wear, and it will be beneficial if the health condition of pin connections can be monitored in real time. In this paper, an acoustic emission (AE)-based method was developed to monitor wear degree of low rotational speed pin connections in real time in a nondestructive way. Most pin connections are operated at low rotational speed. To facilitate the research, an experimental apparatus to accelerate the wear test of low rotational speed pin connections was designed and fabricated. The piezoceramic AE sensor was mounted on the test apparatus in a nondestructive way, and it was capable of real-time monitoring. Accelerated wear tests of low rotational speed pin connections were conducted. To verify the results of the AE technique, a VHX-600E digital (from Keyence, Osaka, Japan) microscope was applied to observe the micrographs of the tested pins. The experimental results show that AE activity existed throughout the entire wear process, and it was the most prominent in the serious wear phase. The wear degree of the pin connections can be reflected qualitatively by the signal strength and the accumulative signal strength of the AE signals. In addition, two different wear forms can be distinguished by comparing the signal strength values of all specimens. Micrographs of all specimens confirm these results, and determine that the two wear forms include adhesive wear and abrasive wear. Furthermore, AE results demonstrated that adhesive wear is the main mode of wear for the low rotational speed pin connections, and the signal strength of the adhesive wear is around 190 times larger than that of abrasive wear. This feasibility study demonstrated that the developed acoustic emission technique can be utilized in the wear monitoring of pin connections in real time in a nondestructive way.