Jun Ho Song
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jun Ho Song has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Bo Sung Kim
Department of Applied Physics, Korea University, Sejong 30019, Republic of Korea
2 shared publications - Changyong Oh
Department of Applied Physics, Korea University, Sejong 30019, Republic of Korea
1 shared publication - Changyong Oh
DRAM Process Architecture Team, Samsung Electronics, Hwaseong-si 18448, Gyeonggi-do, Republic of Korea
1 shared publication - Choong-Ho Cho
Korea University
1 shared publication - Dae Gyu Lee
Department of Computer Information Science, Korea University, Sejong 30019, Republic of Korea
1 shared publication - Hojun Jeong
Division of Display and Semiconductor Physics, Korea University, Sejong 30019, Republic of Korea
1 shared publication
Latest Publications
- Open Access
Dry Etching Characteristics of InGaZnO Thin Films Under Inductively Coupled Plasma–Reactive-Ion Etching with Hydrochloride and Argon Gas Mixture
Inductively coupled plasma–reactive etching (ICP-RIE) of InGaZnO (IGZO) thin films was studied with variations in gas mixtures of hydrochloride (HCl) and argon (Ar). The dry etching characteristics of the IGZO films were investigated according to radiofrequency bias power, gas mixing ratio, and chamber pressure. The IGZO film showed an excellent etch rate of 83.2 nm/min from an optimized etching condition such as a plasma power of 100 W, process pressure of 3 mTorr, and HCl ratio of 75% (HCl:Ar at 30 sccm:10 sccm). In addition, this ICP-RIE etching condition with a high HCl composition ratio at a moderate RIE power of 100 W showed a low etched pattern skew and low photoresist damage on the IGZO patterns. It also provided excellent surface morphology of the SiO2 film underneath after the entire dry etching of the IGZO layer. The IGZO thin film as an active layer was successfully patterned under the ICP-RIE dry etching under the HCl-Ar gas mixture, affording an excellent electrical characteristic in the resultant top-gate IGZO thin-film transistor.
Open AccessDry Etching Characteristics of InGaZnO Thin Films Under Inductively Coupled Plasma–Reactive-Ion Etching with Hydrochloride and Argon Gas Mixture
Inductively coupled plasma–reactive etching (ICP-RIE) of InGaZnO (IGZO) thin films was studied with variations in gas mixtures of hydrochloride (HCl) and argon (Ar). The dry etching characteristics of the IGZO films were investigated according to radiofrequency bias power, gas mixing ratio, and chamber pressure. The IGZO film showed an excellent etch rate of 83.2 nm/min from an optimized etching condition such as a plasma power of 100 W, process pressure of 3 mTorr, and HCl ratio of 75% (HCl:Ar at 30 sccm:10 sccm). In addition, this ICP-RIE etching condition with a high HCl composition ratio at a moderate RIE power of 100 W showed a low etched pattern skew and low photoresist damage on the IGZO patterns. It also provided excellent surface morphology of the SiO2 film underneath after the entire dry etching of the IGZO layer. The IGZO thin film as an active layer was successfully patterned under the ICP-RIE dry etching under the HCl-Ar gas mixture, affording an excellent electrical characteristic in the resultant top-gate IGZO thin-film transistor.
- Open Access
- 22 August 2023
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 41 (5)
Study on effective dry etching of InGaZnO thin films under capacitively coupled plasma-reactive ion etching with a nonfluorine-based etching gas
Dry etching of InGaZnO (IGZO) thin films was performed in a capacitively coupled plasma-reactive ion etching (CCP-RIE) mode using hydrochloride (HCl) and argon (Ar) gases. Dry-etching characteristics and surface properties of IGZO films were then investigated according to gas mixture ratio, radio frequency power, and chamber working pressure. With an optimized ratio of HCl : Ar at 20 : 20 SCCM, the IGZO film showed good etch characteristics with a moderate etch rate of 6.0 nm/min and a low roughness of 0.19 nm. During the etching process of IGZO thin films, nonvolatile by-products such as GaClx, InClx, and ZnClx generated on the surface could be effectively removed by physical bombardment with Ar+ ions. As a result, we successfully conducted dry etching of IGZO thin films in the CCP-RIE system under HCl-Ar gas conditions, which demonstrated dry etching on IGZO without needing a fluorine-based etching gas.
- 22 August 2023
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 41 (5)
Open AccessStudy on effective dry etching of InGaZnO thin films under capacitively coupled plasma-reactive ion etching with a nonfluorine-based etching gas
Dry etching of InGaZnO (IGZO) thin films was performed in a capacitively coupled plasma-reactive ion etching (CCP-RIE) mode using hydrochloride (HCl) and argon (Ar) gases. Dry-etching characteristics and surface properties of IGZO films were then investigated according to gas mixture ratio, radio frequency power, and chamber working pressure. With an optimized ratio of HCl : Ar at 20 : 20 SCCM, the IGZO film showed good etch characteristics with a moderate etch rate of 6.0 nm/min and a low roughness of 0.19 nm. During the etching process of IGZO thin films, nonvolatile by-products such as GaClx, InClx, and ZnClx generated on the surface could be effectively removed by physical bombardment with Ar+ ions. As a result, we successfully conducted dry etching of IGZO thin films in the CCP-RIE system under HCl-Ar gas conditions, which demonstrated dry etching on IGZO without needing a fluorine-based etching gas.