JLJu-Yong Lee

Ju-Yong Lee

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ju-Yong Lee has a total of 56 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Materials and Design Strategies of Fully 3D Printed Biodegradable Wireless Devices for Biomedical Applications

    by Ju‐Yong Lee, Jooik Jeon, Joo‐Hyeon Park, Se‐Hun Kang, Yea‐Seol Park, Minseong Chae, Jieun Han, Kyung‐Sub Kim, Jae‐Hwan Lee, Sung‐Geun Choi, et al.

    3D printing of bioelectronics offers a versatile platform for fabricating personalized and structurally integrated electronic systems within biological scaffolds. Biodegradable electronics, which naturally dissolve after their functional lifetime, minimize the long‐term burden on both patients and healthcare providers by eliminating the need for surgical retrieval. In this study, we developed a library of 3D‐printable, biodegradable electronic inks encompassing conductors, semiconductors, and dielectrics, thereby enabling the direct printing of fully functional, multi‐material, customizable electronic systems in a single integrated process. Especially, conjugated molecules were introduced to improve charge mobility and energy level alignment in semiconducting inks. This ink platform supports the fabrication of passive and active components and physical and chemical sensors, making it suitable for complex biomedical applications. Versatility of this system was demonstrated through two representative applications: (i) wireless pressure sensor embedded within biodegradable scaffolds, (ii) wireless electrical stimulators that retain programmable electrical functionality in vivo and degrade post‐implantation. This work establishes a foundation of modules for autonomous, biodegradable bioelectronic systems fabricated entirely via 3D printing, with implications for personalized diagnostics, therapeutic interfaces, and transient medical devices.


  • Open Access

    Dual-phoretic wireless device for directionally oriented and carrier-free targeted drug delivery

    by Sung-Geun Choi, Seongchan Kim, Joon-Woo Kim, Myung-Kyun Choi, Jieun Han, Dong-Jun Koo, Soo-Hwan Lee, Aejin Kim, Ji-Woo Gu, Ki Hun Kim, et al.

    Drug localization, release control, and penetration into solid tissues through biological tight junctions are crucial for the treatment of localized diseases with biological barriers by maximizing therapeutic efficacy of the drug and minimizing damage to normal organs. Here, we introduce a dual-phoretic wireless drug delivery system that harnesses the physical control of ion transportation: electrophoresis for controllable release and iontophoresis for directional penetration. Adjustable, pulsatile, and repeatable drug release under biological conditions is achieved using ion diodes and Zn-based electrochemical cells. Through seamless integration with iontophoretic compartments, a fourfold improvement in delivery efficiency compared to drug diffusion, reaching the core of in vivo tumor, is verified by a 3D tomographic analysis. Fully implantable and wireless operation in a simulated 2-week therapeutic scenario results in a remarkable 50% tumor reduction from the initial volume while minimizing damage to nearby normal tissue and off-target organs such as the heart, liver, spleen, and kidney.


  • Top Cited Papers
    Open Access

    Hypersensitive meta-crack strain sensor for real-time biomedical monitoring

    by Jae-Hwan Lee, Yoon-Nam Kim, Junsang Lee, Jooik Jeon, Jae-Young Bae, Ju-Yong Lee, Kyung-Sub Kim, Minseong Chae, Hyunjun Park, Jong-Hyoung Kim, et al.

    Real-time monitoring of infinitesimal deformations on complex morphologies is essential for precision biomechanical engineering. While flexible strain sensors facilitate real-time monitoring with shape-adaptive properties, their sensitivity is generally lower than spectroscopic imaging methods. Crack-based strain sensors achieve enhanced sensitivity with gauge factors (GFs) exceeding 30,000; however, such GFs are only attainable at large strains exceeding several percent and decline below 10 for strains under 10 −3 , rendering them inadequate for minute deformations. Here, we introduce hypersensitive and flexible “meta-crack” sensors detecting infinitesimal strains through previously undiscovered crack-opening mechanisms. These sensors achieve remarkable GFs surpassing 1000 at strains of 10 −4 on substrates with a Poisson’s ratio of −0.9. The crack orientation–independent gap-widening behavior elucidates the origin of hypersensitivity, corroborated by simplified models and finite element analysis. Additionally, parallel mechanical circuits of meta-cracks effectively address the trade-off between resolution and maximum sensing threshold. In vivo real-time monitoring of cerebrovascular dynamics with a strain resolution of 10 −5 underscores the hypersensitivity and conformal adaptability of sensors.


  • Magnetically Actuated Trigger Transient Soft Actuators Comprising On-Demand Photo-Initiated and Thermo-Degradable Polypropylene Carbonate–Photo-Acid Generator

    by Min-Ha Oh, Young-Hwan Kim, Jieun Han, Yongsub Kim, Daewhan Kim, Kyung-Sub Kim, Ju-Yong Lee, Sang-Koog Kim, Min Sang Kwon, Sang Yup Kim, et al.

    Lifetime-reconfigurable soft robots have emerged as a new class of robots, emphasizing the unmet needs of futuristic sustainability and security. Trigger-transient materials that can both actuate and degrade on-demand are crucial for achieving life-reconfigurable soft robots. Here, we propose the use of transient and magnetically actuating materials that can decompose under ultraviolet light and heat, achieved by adding photo-acid generator (PAG) and magnetic particles (Sr-ferrite) to poly(propylene carbonate) (PPC). Chemical and thermal analyses reveal that the mechanism of PPC-PAG decomposition occurs through PPC backbone cleavage by the photo-induced acid. The self-assembled monolayer (SAM) encapsulation of Sr-ferrite preventing the interaction with the PAG allowed the transience of magnetic soft actuators. We demonstrate remotely controllable and degradable magnetic soft kirigami actuators using blocks with various magnetized directions. This study proposes novel approaches for fabricating lifetime-configurable magnetic soft actuators applicable to diverse environments and applications, such as enclosed/sealed spaces and security/military devices.


  • Open Access

    Lifetime-configurable soft robots via photodegradable silicone elastomer composites

    by Min-Ha Oh, Young-Hwan Kim, Seung-Min Lee, Gyeong-Seok Hwang, Kyung-Sub Kim, Yoon-Nam Kim, Jae-Young Bae, Ju-Young Kim, Ju-Yong Lee, Yu-Chan Kim, et al.

    Developing soft robots that can control their own life cycle and degrade on-demand while maintaining hyperelasticity is a notable research challenge. On-demand degradable soft robots, which conserve their original functionality during operation and rapidly degrade under specific external stimulation, present the opportunity to self-direct the disappearance of temporary robots. This study proposes soft robots and materials that exhibit excellent mechanical stretchability and can degrade under ultraviolet light by mixing a fluoride-generating diphenyliodonium hexafluorophosphate with a silicone resin. Spectroscopic analysis revealed the mechanism of Si─O─Si backbone cleavage using fluoride ion (F−) and thermal analysis indicated accelerated decomposition at elevated temperatures. In addition, we demonstrated a robotics application by fabricating electronics integrated gaiting robot and a fully closed-loop trigger disintegration robot for autonomous, application-oriented functionalities. This study provides a simple yet novel strategy for designing life cycle mimicking soft robotics that can be applied to reduce soft robotics waste, explore hazardous areas, and ensure hardware security with on-demand destructive material platforms.