MCMohit Chatwani

Mohit Chatwani

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mohit Chatwani has a total of 76 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Mechanochemical Activation of Nickel Oxide: A Pivotal Step in the Process Chain Enabling Binder-Free Anodes for Alkaline Water Electrolysis

    by Mohit Chatwani, Adarsh Jain, Christian Marcks, Jacob Johny, Lars Grebener, Hao Yun, Ali Raza Khan, Georg Bendt, Stefan Romeis, Viktor Čolić, et al.

    Sustainable hydrogen production via alkaline water electrolysis demands robust electrocatalysts for the oxygen evolution reaction (OER) that combine performance with scalability. We address this by mechanochemical activation of nickel oxide (NiO) to fabricate binder-free anodes. First, we investigated the effects of planetary ball milling (PBM), which decreased crystallite size, increased specific surface area, elevated Ni3+ content, and enhanced the amount of surface hydroxyl groups. PBM with larger beads induced more pronounced structural transformations due to higher impact forces. Mechanochemically activated NiO showed a lower overpotential than bare nickel (365 vs. 377 mV at 100 mA cm–2 in 1 M KOH) with excellent particle cohesion, enabling mechanically stable, binder-free anodes. We translated this approach to continuously operable stirred media milling, enabling mechanochemical activation and concurrent ink formulation in isopropanol, eliminating intermediate powder drying as needed in the case of PBM. The resulting anodes exhibited an even lower overpotential (343 mV) and higher mechanical robustness, offering a binder-free pathway for OER electrode fabrication.

  • Open Access

    Thickness‐Dependent Plasma Activation in Binder‐Free Multilayer Ni–Co–O Anodes for Alkaline Oxygen Evolution

    by Mohit Chatwani, Christian Marcks, Christina Meinert, Ioannis Spanos, Adarsh Jain, Viktor Mackert, Ahammed Suhail Odungat, Timo Wagner, Lars Grebener, Abhishek Shaji, et al.

    Binder‐free Ni–Co–O anodes were fabricated by ultrasonic spraycoating multilayer catalyst films directly onto Ni substrates, followed by nitrogen plasma treatment to enhance performance in alkaline water electrolysis. By systematically varying coating thickness, we were able to elucidate the relationship between plasma‐induced surface reconstruction and electrode architecture. Plasma exposure, with an effective modification depth of ∼1 µm, promoted near‐surface Co enrichment and improved wettability while preserving the bulk crystal structure, as confirmed by X‐ray photoelectron spectroscopy, energy‐dispersive X‐ray spectroscopy, and grazing‐incidence X‐ray diffraction. Despite this only partial activation of thicker coatings, their enhanced porosity and microscale roughness facilitated superior electrolyte penetration and gas release, leading to higher catalytic efficiency. Consequently, the thickest plasma‐treated electrode exhibits an overpotential of 335 mV at 100 mA cm −2 in 1 M KOH, outperforming the Ni substrate reference (380 mV), while maintaining robust mechanical integrity without delamination. These findings demonstrate that catalytic performance depends on the interplay between finite plasma activation depth and multilayer thickness, highlighting the need to tailor coating thickness to balance surface modification with effective electrolyte penetration and gas transport. Nitrogen plasma treatment thus provides a scalable strategy for engineering mechanically robust and efficient binder‐free Ni–Co–O anodes for alkaline oxygen evolution reaction.


  • Open Access

    A Proof of Principle for the Phase‐Dependent Electrocatalytic Activity of NiTi Shape Memory Alloys for the Oxygen Evolution Reaction

    by Vineetha Vinayakumar, Santiago Benito, Aneeta Jose, Alexander Kunzmann, Adarsh Jain, Ruben Skjelstad Dragland, Mohit Chatwani, Blaž Toplak, Adithya Aravind, Dennis Meier, et al.

    Nickel–titanium (NiTi) shape memory alloys are intermetallic compounds that can exhibit a reversible martensitic phase transformation. While extensively studied for biomedical and actuator applications, their potential as electrocatalysts for the oxygen evolution reaction (OER) remains virtually unexplored. Here, we systematically investigate how phase structure influences OER activity in NiTi alloys by comparing martensite Ni 50 Ti 50 (B19’ monoclinic) and austenite Ni 51.2 Ti 48.8 (B2 cubic). Despite differing by only 1.2 at.% Ni, the investigated specimens exhibit markedly different electrocatalytic behavior. In 1 M KOH containing 15 ppb Fe, the martensitic phase requires 40 mV lower overpotential (450 vs. 490 mV at 10 mA cm −2 ) and maintains stable operation at 1.56 V vs. RHE for 12 h. This improved activity correlates with phase‐dependent properties: enhanced electrical conductivity, finer surface texture, and markedly increased hydrophilicity (contact angle 21° vs. 71°). The martensitic phase also shows a 10% larger electrochemically active surface area. Under elevated Fe levels (150 ppb), the martensite phase undergoes stronger surface restructuring and achieves a 370 mV lower overpotential, indicating superior Fe incorporation. These findings demonstrate that OER performance in NiTi alloys is systematically tunable via microstructural states, establishing phase engineering as a promising strategy for designing next‐generation water‐splitting electrocatalysts.

  • Open Access

    Activation of powder-coated electrodes for the alkaline oxygen evolution reaction

    by Christian Marcks, Clara Gohlke, Mohit Chatwani, Adarsh Jain, Timo Wagner, Nicolas Wöhrl, Vineetha Vinayakumar, Vera Seidl, Doris Segets, Anna K. Mechler


  • Open Access

    A Proof of Principle for the Phase-Dependent Electrocatalytic Activity of NiTi Shape Memory Alloys for Oxygen Evolution Reaction

    by Vineetha Vinayakumar, Santiago Benito, Aneeta Jose, Alexander Kunzmann, Adarsh Jain, Ruben Skjelstad Dragland, Mohit Chatwani, Blaz Toplak, Adithya Aravind, Dennis Meier, et al.

    Nickel-titanium (NiTi) shape memory alloys are intermetallic compounds which can exhibit a reversible martensitic phase transformation. While extensively studied for biomedical and actuator applications, their potential as electrocatalysts for the oxygen evolution reaction (OER) remains virtually unexplored. Here, we systematically investigate how phase structure influences OER activity in NiTi alloys by comparing martensite Ni₅₀Ti₅₀ (B19' monoclinic) and austenite Ni₅₁.₂Ti₄₈.₈ (B2 cubic). Despite differing by only 1.2 at.% Ni, the investigated specimens exhibit markedly different electrocatalytic behavior. In 1 M KOH containing 15 ppb Fe, the martensitic one requires 40 mV lower overpotential (450 mV vs. 490 mV at 10 mA cm⁻²) and maintains stable operation at 1.56 V vs. RHE over 12 hours. This improved activity correlates with characteristic phase-dependent properties: enhanced electrical conductivity, finer surface texture, and a markedly increased hydrophilicity of martensite (contact angle 21° vs. 71°). The martensitic phase also shows a 10% larger electrochemically active surface area. Under elevated Fe levels (150 ppb), the martensite phase undergoes stronger surface restructuring and achieves a 370 mV lower overpotential, indicating superior Fe incorporation compared to austenite. Together, these findings demonstrate that the OER performance in NiTi alloys is systematically tunable via their microstructural states and establish phase engineering of intermetallic shape memory alloys as a promising strategy for rationally designing next-generation electrocatalysts for water splitting.

  • Open Access

    A Proof‐of‐Principle Demonstration: Exploring the Effect of Anode Layer Microstructure on the Alkaline Oxygen Evolution Reaction

    by Adarsh Jain, Christian Marcks, Lars Grebener, Jacob Johny, Ahammed Suhail Odungat, Mohit Chatwani, Mena‐Alexander Kräenbring, Abhishek Shaji, Marc Frederic Tesch, Anna K. Mechler, et al.

    This study explores the effect of nickel cobalt oxide (Ni‐Co‐O) anode layer microstructure on the oxygen evolution reaction (OER). Four anodes with similar Ni‐Co‐O loadings and chemical characteristics but distinct morphologies are fabricated by ultrasonic spraying catalyst inks of varying solvent composition (pure water versus a water‐ethanol mixture) and drying temperatures (50 and 150 °C) on nickel (Ni) plates. Upon varying solvent composition, particles in the water‐based ink exhibited lower stability than particles in the water‐ethanol‐based ink, boosting the particle connectivity in the layers. This particle connectivity correlated with the mechanical strength of the layers, resulting in reduced contact resistance and enhanced activity. The second observation is that at 50 °C, the surface morphology exhibited hill‐like islands with higher roughness, while at 150 °C, concave hemispherical shapes with lower roughness are observed. From 2D‐distribution data, it is found that surface roughness correlated with the wettability with electrolyte. Roughness increased the lyophobicity and enhanced the activity through more accessible active sites and efficient bubble transport. This work highlights how microstructure affects macroscopic layer properties, and how these in turn can enhance or diminish the performance of the OER compared to bare Ni, offering insights into the knowledge‐based design of anode layers.


  • Open Access

    Ni-Co-O anodes for the alkaline oxygen evolution reaction: Multistage electrode optimization and plasma-assisted activity enhancement enabled by a coherent workflow

    by Vineetha Vinayakumar, Timo Wagner, Christian Marcks, Jacob Johny, Garlef Wartner, Marc F. Tesch, Ioannis Spanos, Aliakbar Ghafari, Adarsh Jain, Oleg Prymak, et al.

    Ni-Co-based oxides (Ni-Co-O) are promising oxygen evolution reaction (OER) catalysts due to their adaptable structures, affordability, abundance, and strong electrochemical performance. While various studies explored the structure-activity relationships and OER mechanisms in these catalysts, comprehensive anode development requires a systematic workflow covering all stages of catalyst optimization. Here, we present an integrated approach for characterizing commercial Ni-Co-O nanomaterials using a combination of analytics during processing, in operando, and post-catalysis to gain insights into parameters influencing anode performance. Key findings include the critical impact of catalyst ink optimization through solvent matrix screening, enabling high-quality electrode layers via ultrasonic spray coating on Ni plates. These Ni-Co-O layers, tested as anodes in alkaline OER, were further enhanced by plasma post-processing, resulting in binder-free surfaces with increased porosity and wettability compared to untreated samples. Notably, plasma treatment also promoted a more redox reversible catalyst structure, improved Fe uptake efficiency, and led to a significantly enhanced OER activity by reducing the overpotential by ~43 mV at 100 mA/cm² compared to untreated samples. Our study highlights the importance of a holistic evaluation approach, from catalyst powder to post-mortem analysis, that enabled us to discover how plasma post-processing can yield binder-free electrodes with superior electrochemical properties.

  • Unveiling a Binder-Free Approach through Plasma Treatment of NiCoO2 Anode Multi-Layer Coatings for Alkaline Water Electrolysis

    by Mohit Chatwani, Christian Marcks, Adarsh Jain, Timo Wagner, Nicolas Wöhrl, Anna K. Mechler, Vineetha Vinayakumar, Doris Segets

    Over the past decades, the challenge of sustainable energy production at low cost has persisted. Hydrogen emerges as a viable alternative fuel for various applications, yet its utilization faces hurdles. This particularly concerns the sluggish kinetics of the oxygen evolution reaction (OER) at the anode, necessitating higher input energy than theoretically optimal. Apart from an active electrocatalyst, the structure of the anode coating significantly influences performance [1-2-3]. Typically, fluorinated polymer compounds serve as a binder/ionomer, enhancing ionic transport during OER [4]. However, its exorbitant price and compliance with European Union regulations banning per- and polyfluoro substances (PFAS) poses challenges. One solution is to develop binder-free anodes. In this study, we explore the effectiveness of a nitrogen plasma treatment (PT) on catalyst-coated nickel plates with varying mass loadings to achieve binder-free and efficient OER performance. As a starting point, we utilized commercial nickel-cobalt-oxide (NiCoO2, Merck group), featuring processable primary particle sizes < 150 nm. Characterization of the powder involved various techniques including X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). Next, Hansen solubility parameters were recorded to select the suitable dispersant and an ink was prepared using an ethanol-water mixture. Ink stability was demonstrated through analytical centrifugation measurements analyzed by transmittograms [5]. Stable inks passing this quality gate were spray coated onto Ni metal plates with varying layer numbers of 40 (anode 40L), 80 (anode 80L), and 120 (anode 120 L), corresponding to mass loadings of 375 µg cm-2, 750 ug cm-2 and 1125 ug cm-2, respectively. Noteworthily, anode 40L exhibited incomplete catalyst coverage with visible substrate whereas anode 80L and anode 120L displayed a fully covered substrate. As these layers suffered from mechanical instability due to delamination, we added post-treatment by nitrogen plasma. All anodes were analyzed before and after plasma treatment in terms of their morphology, physico-chemical characteristics, and adhesion properties. The mechanical properties of these coatings were evaluated using an adhesion analyser, revealing enhanced adhesion strength for plasma treated samples compared to their as-prepared counterparts. Scanning electron microscopy (SEM) analysis exhibited notable morphological alterations in the plasma-treated samples as illustrated in Figure 1a-c. Two distinct morphologies were observed. In case of anode 40L with plasma treatment (40L PT), the sample displayed incomplete coverage and exhibited spherical clusters of agglomerates. In contrast, the fully coated anodes 80L PT and 120L PT showcased enhanced coverage and distinct agglomerates. Besides these morphological observations, energy dispersive X-ray (EDX) analysis and X-ray photoelectron spectroscopy (XPS) showcased a notable increase in the oxygen to metal ratio in anode 40L PT compared to anodes 80L PT and 120L PT. We attribute this to the synergistic interaction between the N2 plasma and the Ni plate substrate. This holds particularly for anode 40L PT, due to its low catalyst density and exposed Ni surface from the substrate which might have potentially induced the presence of oxygen molecules on the electrode surface. Finally, electrochemical measurements showed similar activity for the fully covered anodes 80L PT and 120L PT as shown in Figure 1d. This was expected due to very similar morphologies and surface properties evidenced by the chemical analysis. This indicates that higher mass loading does not increase the OER performance after PT. In contrast, anode 40L PT exhibited clearly superior performance with an overpotential value of 373 ± 3 mV. This can be potentially attributed to the higher abundance of oxides at the surface, which might have increased the amount of active sites in the anode. Our study highlights the potential of binder-free anodes for enhancing the efficiency of the OER in hydrogen production. By employing commercial NiCoO2 powder as an electrocatalyst, coated on nickel substrates and finally utilizing a post-nitrogen plasma treatment, we achieved optimization of properties among the different layers, resulting in improved OER performance. These findings provide valuable insights into advancing the development of efficient and sustainable energy production technologies, thereby facilitating progress towards binder-free innovations in the field of electrocatalysis. References: [1] M.-I. Jamesh and M. Harb, Journal of Energy Chemistry, 56, 299–342 (2021) [2] V. Vinayakumar et al., ECS Meeting Abstracts, MA2023-02, 2846–2846 (2023) [3] A. Jain et al., ChemCatChem, 16 (2024) [4] G. Li, D. Yang, and P. A. Chuang, ACS catalysis, 11688–11698 (2018) [5] S. Bapat and D. Segets, ACS Applied Nano Materials, 3, 7384–7391 (2020) Figure 1

  • Mechanochemical Activation of Nickel Oxide Enabling Binder-Free Anodes for Alkaline Water Electrolysis

    by Mohit Chatwani, Christian Marcks, Adarsh Jain, Anna K. Mechler, Vineetha Vinayakumar, Doris Segets

    In recent decades, the imperative for clean energy generation has grown significantly. Water electrolysis stands out as a sustainable method for hydrogen production due to its zero carbon emissions. However, high energy requirements and costs hinder its widespread adoption for large-scale applications [1]. Non-noble metal-based materials have emerged as cost-effective and efficient anodes for the oxygen evolution reaction (OER). However, the stability and performance of these materials heavily rely on the integration of ionomers or binders into the electrode coatings. For example, Nafion, renowned for its high ionic conductivity and ability to stabilize coating structures [2], has been a preferred choice [3]. Yet, their high cost and impending regulations concerning per- and polyfluoro alkyl substances (PFAS) by European agencies necessitate the exploration of alternative approaches. Here, we propose a solution involving binder-free anode coatings, achieved through mechano-chemical activation via planetary ball milling of commercially available catalyst materials. This innovative method offers a promising avenue for developing environmentally sustainable anodes with effective performance, circumventing the limitations associated with conventional binder materials. In this study, nickel oxide (NiO, Merck group) was processed without binders through a modification of the powder material via planetary ball milling where parameters as bead size, rotation speed, and process time were varied. The initial visual contrast transformation from the green hue of the NiO feed to a dark grey or black shade appearance after ball milling which might indicate the presence of Ni2O3. Additionally, certain samples exhibited a needle-like morphology, with particle enlargement occurring selectively in instances involving larger beads during the milling process. These samples were discarded due to missing processability. Powder characterizations were conducted on both the as-purchased NiO feed (as reference) and the ball milled samples. Transmission electron microscopy (TEM) analysis confirmed reduced primary particle size across all ball milled samples as shown in the inset of Figure 1a-b. Energy dispersive X-ray (EDX) analysis indicated a decrease in the Ni metal content with a simultaneous increase in the oxygen content, while – in line with our expectations [4] – the reduced crystallinity of all NiO phases after ball milling was confirmed by X-ray diffraction (XRD) analysis. With regard to the surface species, Fourier-transform infrared (FTIR) spectroscopy evidenced a significant increase of hydroxide (OH) in the ball milled samples. At the same time X-ray photoelectron spectroscopy (XPS) data revealed an increase in the Ni3+ content, followed by a decrease in Ni2+ as analyzed from the Ni 2p spectrum. Combining both findings, we expect an improved anode performance due to the formation of Ni(OH)2 or NiOOH species [5]. Preliminary dispersion experiments were realized in different probe liquids [6] and subsequently the Hansen solubility parameters (HSP) were determined to achieve high-quality dispersions efficiently [7]. Because of the large particle size, all dispersions based on commercial NiO sedimented quickly, whereas the ball milled samples with significantly reduced primary particle size were stable in liquids like ethanol and isopropanol.This finding was quantified by transmittograms, where the sedimentation time, radial position and transmission are plotted together as shown in Figure 1a-b. Due to the inadequate dispersion stability of commercial NiO and thus missing processability, no electrodes were realized with this material. Finally, the ball milled samples were spray-coated onto Ni plate substrates without using binders. Scanning electron microscopy (SEM) images displayed diverse distributions of catalyst particles implying different coating structures and a range of morphologies. Electrochemical measurements at 100 mA cm-2 evidenced an improved activity of ~100 mV for the electrodes that were fabricated from the ball milled samples (Sample 1: 400 rpm, 4 h, Sample 2: 250 rpm, 2 h, constant bead size of 0.3 mm) during oxygen evolution compared to the bare Ni plate substrate as shown in Figure 1c. Within 2 h of testing, no delamination of the material was monitored evidencing its chemical and mechanical stability as a binder-free catalyst layer. In conclusion, this study presents a promising approach to achieve binder-free anodes enabled by mechanochemical activation. The versatility of this method offers opportunities to optimize non-noble metal-based materials for enhanced OER performance, thereby advancing the prospects of sustainable energy generation. References: [1]H. Niu et al., Applied sciences (Basel), 2177 (2023). [2] A. Jain et al., ChemCatChem, 16 (2024) [3] G. Li, D. Yang, and P. A. Chuang, ACS catalysis, 11688–11698 (2018) [4] X. Zhou et al., Advanced materials, 29 (2016) [5] N. Akbari and M. Najafpour, Inorganic Chemistry, 62, 19107–19114 (2023) [6] A. S. Amin et al., ChemCatChem, 16 (2024) [7] S. Bapat and D. Segets, ACS Applied Nano Materials, 3, 7384–7391 (2020) Figure 1

  • Open Access

    From Small‐Area Observations to Insight: Surface‐Feature‐Extrapolation of Anodes for Alkaline Oxygen Evolution Reaction

    by Adarsh Jain, Vineetha Vinayakumar, André Olean‐Oliveira, Christian Marcks, Mohit Chatwani, Anna K. Mechler, Corina Andronescu, Doris Segets

    In this study, we developed a statistical framework, named multistage data quantification (MSDQ), to evaluate representative surface characteristics such as surface roughness, surface area, and homogeneity score of cobalt oxide‐based anodes, and contributing to a deeper insight into the quality of the anode surface. Atomic force microscopy (AFM) was employed to capture the surface morphology of two anodes that have a comparable loading of cobalt oxide but exhibit distinct morphological features. Application of MSDQ exposed notable disparities in surface characteristics across these anodes, underlining the critical importance of MSDQ in precise surface characterization. Specifically, surface roughness, surface area and homogeneity score effectively elucidated the disparities in electrocatalytic activity for the oxygen evolution reaction (OER), as quantified through scanning droplet cell (SDC) measurements. By conducting a systematic comparative analysis, the respective contributions of the extrinsic surface characteristics of the anodes to the intrinsic electrocatalytic material property could be differentiated and quantified. Applications of our findings range from benchmarking of anodes to optimization of anode manufacturing processes.