Adarsh Jain
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Adarsh Jain has a total of 85 co-authors. Here are the top co-authors by number of shared publications:
- Christian Marcks
Electrochemical Reaction Engineering RWTH Aachen University Forckenbeckstraße 51 52074 Aachen Germany
11 shared publications - Anna Katharina Mechler
Electrochemical Reaction Engineering (AVT.ERT) RWTH Aachen University Aachen Germany
10 shared publications - Doris Segets
Institute for Energy and Materials Processes – Particle Science and Technology (EMPI‐PST) University of Duisburg‐Essen Duisburg Germany
10 shared publications - Mohit Chatwani
Institute for Energy and Materials Processes – Particle Science and Technology (EMPI‐PST) University of Duisburg‐Essen Duisburg Germany
9 shared publications - Vineetha Vinayakumar
Institute for Energy and Materials Processes – Particle Science and Technology (EMPI‐PST) University of Duisburg‐Essen Duisburg Germany
8 shared publications Ahammed Suhail Odungat
Institute for Energy and Materials Processes − Particle Science and Technology (EMPI-PST), University of Duisburg-Essen, Carl-Benz-Straße 199, 47057 Duisburg, Germany
4 shared publications
Latest Publications
- 1 September 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 9 (17) , 11148-11164
Mechanochemical Activation of Nickel Oxide: A Pivotal Step in the Process Chain Enabling Binder-Free Anodes for Alkaline Water Electrolysis
Sustainable hydrogen production via alkaline water electrolysis demands robust electrocatalysts for the oxygen evolution reaction (OER) that combine performance with scalability. We address this by mechanochemical activation of nickel oxide (NiO) to fabricate binder-free anodes. First, we investigated the effects of planetary ball milling (PBM), which decreased crystallite size, increased specific surface area, elevated Ni3+ content, and enhanced the amount of surface hydroxyl groups. PBM with larger beads induced more pronounced structural transformations due to higher impact forces. Mechanochemically activated NiO showed a lower overpotential than bare nickel (365 vs. 377 mV at 100 mA cm–2 in 1 M KOH) with excellent particle cohesion, enabling mechanically stable, binder-free anodes. We translated this approach to continuously operable stirred media milling, enabling mechanochemical activation and concurrent ink formulation in isopropanol, eliminating intermediate powder drying as needed in the case of PBM. The resulting anodes exhibited an even lower overpotential (343 mV) and higher mechanical robustness, offering a binder-free pathway for OER electrode fabrication.
- 1 September 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 9 (17) , 11148-11164
Mechanochemical Activation of Nickel Oxide: A Pivotal Step in the Process Chain Enabling Binder-Free Anodes for Alkaline Water Electrolysis
Sustainable hydrogen production via alkaline water electrolysis demands robust electrocatalysts for the oxygen evolution reaction (OER) that combine performance with scalability. We address this by mechanochemical activation of nickel oxide (NiO) to fabricate binder-free anodes. First, we investigated the effects of planetary ball milling (PBM), which decreased crystallite size, increased specific surface area, elevated Ni3+ content, and enhanced the amount of surface hydroxyl groups. PBM with larger beads induced more pronounced structural transformations due to higher impact forces. Mechanochemically activated NiO showed a lower overpotential than bare nickel (365 vs. 377 mV at 100 mA cm–2 in 1 M KOH) with excellent particle cohesion, enabling mechanically stable, binder-free anodes. We translated this approach to continuously operable stirred media milling, enabling mechanochemical activation and concurrent ink formulation in isopropanol, eliminating intermediate powder drying as needed in the case of PBM. The resulting anodes exhibited an even lower overpotential (343 mV) and higher mechanical robustness, offering a binder-free pathway for OER electrode fabrication.
- Open Access
- 21 July 2026
- Published by Elsevier in Electrochimica Acta
- Vol. 575
Drying strategies for drop-cast OER electrodes: preventing post-synthetic sintering for optimized performance of NiFe-LDH electrocatalysts
- 21 July 2026
- Published by Elsevier in Electrochimica Acta
- Vol. 575
Open AccessDrying strategies for drop-cast OER electrodes: preventing post-synthetic sintering for optimized performance of NiFe-LDH electrocatalysts
- Open Access
- 3 June 2026
- Published by Wiley in ChemElectroChem
- Vol. 13 (12)
A Proof of Principle for the Phase‐Dependent Electrocatalytic Activity of NiTi Shape Memory Alloys for the Oxygen Evolution Reaction
Nickel–titanium (NiTi) shape memory alloys are intermetallic compounds that can exhibit a reversible martensitic phase transformation. While extensively studied for biomedical and actuator applications, their potential as electrocatalysts for the oxygen evolution reaction (OER) remains virtually unexplored. Here, we systematically investigate how phase structure influences OER activity in NiTi alloys by comparing martensite Ni 50 Ti 50 (B19’ monoclinic) and austenite Ni 51.2 Ti 48.8 (B2 cubic). Despite differing by only 1.2 at.% Ni, the investigated specimens exhibit markedly different electrocatalytic behavior. In 1 M KOH containing 15 ppb Fe, the martensitic phase requires 40 mV lower overpotential (450 vs. 490 mV at 10 mA cm −2 ) and maintains stable operation at 1.56 V vs. RHE for 12 h. This improved activity correlates with phase‐dependent properties: enhanced electrical conductivity, finer surface texture, and markedly increased hydrophilicity (contact angle 21° vs. 71°). The martensitic phase also shows a 10% larger electrochemically active surface area. Under elevated Fe levels (150 ppb), the martensite phase undergoes stronger surface restructuring and achieves a 370 mV lower overpotential, indicating superior Fe incorporation. These findings demonstrate that OER performance in NiTi alloys is systematically tunable via microstructural states, establishing phase engineering as a promising strategy for designing next‐generation water‐splitting electrocatalysts.
- 3 June 2026
- Published by Wiley in ChemElectroChem
- Vol. 13 (12)
Open AccessA Proof of Principle for the Phase‐Dependent Electrocatalytic Activity of NiTi Shape Memory Alloys for the Oxygen Evolution Reaction
Nickel–titanium (NiTi) shape memory alloys are intermetallic compounds that can exhibit a reversible martensitic phase transformation. While extensively studied for biomedical and actuator applications, their potential as electrocatalysts for the oxygen evolution reaction (OER) remains virtually unexplored. Here, we systematically investigate how phase structure influences OER activity in NiTi alloys by comparing martensite Ni 50 Ti 50 (B19’ monoclinic) and austenite Ni 51.2 Ti 48.8 (B2 cubic). Despite differing by only 1.2 at.% Ni, the investigated specimens exhibit markedly different electrocatalytic behavior. In 1 M KOH containing 15 ppb Fe, the martensitic phase requires 40 mV lower overpotential (450 vs. 490 mV at 10 mA cm −2 ) and maintains stable operation at 1.56 V vs. RHE for 12 h. This improved activity correlates with phase‐dependent properties: enhanced electrical conductivity, finer surface texture, and markedly increased hydrophilicity (contact angle 21° vs. 71°). The martensitic phase also shows a 10% larger electrochemically active surface area. Under elevated Fe levels (150 ppb), the martensite phase undergoes stronger surface restructuring and achieves a 370 mV lower overpotential, indicating superior Fe incorporation. These findings demonstrate that OER performance in NiTi alloys is systematically tunable via microstructural states, establishing phase engineering as a promising strategy for designing next‐generation water‐splitting electrocatalysts.
- Open Access
- 24 March 2026
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 228
Activation of powder-coated electrodes for the alkaline oxygen evolution reaction
- 24 March 2026
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 228
Open AccessActivation of powder-coated electrodes for the alkaline oxygen evolution reaction
- 3 November 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (45) , 62720-62732
Wetting across the Lyophilic–Lyophobic Spectrum: Morphological Tuning of Anode Catalyst Layers for the Alkaline Oxygen Evolution Reaction
In alkaline water electrolysis (AWE), anode wettability plays a critical role in governing bubble dynamics at the anode-electrolyte interface. Effective bubble management is essential for improving AWE performance, as it enhances active site accessibility and reduces transport resistance. This study investigates the influence of superlyophilicity and superlyophobicity of spray-coated nickel iron layered double hydroxide (Ni-Fe-LDH) anodes on the electrochemical performance for the oxygen evolution reaction (OER). Surface wettability is adjusted through binder selection (Sustainion and Nafion) and drying-induced morphological modifications. Sustainion-based nanostructured anode layers display pronounced superlyophilicity (θ < 10°) governed by the Wenzel model. In contrast, Nafion-based nanostructured films exhibit tailored superlyophobicity (θ > 150°) indicative of a Cassie-Baxter-type wetting state. The superlyophilic anodes achieve the lowest overpotential, with a reduction of 73 mV at 100 mA cm-2 compared to the superlyophobic anode. Postelectrochemical analysis reveals a correlation between wetting states and the extent of the anode's active area utilization. Superlyophilic anodes achieve a complete wetting and full layer contribution, while superlyophobic anodes exhibit large nonwetted regions as high as ≈47%, resulting in partial contribution to the OER. The understanding gained by this work enables the rational design of high-performance anodes through the systematic control of wettability.
- 3 November 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (45) , 62720-62732
Wetting across the Lyophilic–Lyophobic Spectrum: Morphological Tuning of Anode Catalyst Layers for the Alkaline Oxygen Evolution Reaction
In alkaline water electrolysis (AWE), anode wettability plays a critical role in governing bubble dynamics at the anode-electrolyte interface. Effective bubble management is essential for improving AWE performance, as it enhances active site accessibility and reduces transport resistance. This study investigates the influence of superlyophilicity and superlyophobicity of spray-coated nickel iron layered double hydroxide (Ni-Fe-LDH) anodes on the electrochemical performance for the oxygen evolution reaction (OER). Surface wettability is adjusted through binder selection (Sustainion and Nafion) and drying-induced morphological modifications. Sustainion-based nanostructured anode layers display pronounced superlyophilicity (θ < 10°) governed by the Wenzel model. In contrast, Nafion-based nanostructured films exhibit tailored superlyophobicity (θ > 150°) indicative of a Cassie-Baxter-type wetting state. The superlyophilic anodes achieve the lowest overpotential, with a reduction of 73 mV at 100 mA cm-2 compared to the superlyophobic anode. Postelectrochemical analysis reveals a correlation between wetting states and the extent of the anode's active area utilization. Superlyophilic anodes achieve a complete wetting and full layer contribution, while superlyophobic anodes exhibit large nonwetted regions as high as ≈47%, resulting in partial contribution to the OER. The understanding gained by this work enables the rational design of high-performance anodes through the systematic control of wettability.
- 11 September 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
Supraparticle Assembly of La0.8Sr0.2CoO3 Nanoparticles for Enhanced Lattice Oxygen Oxidation in Alkaline Electrolysis
Developing effective non-noble metal electrocatalysts for the oxygen evolution reaction (OER) remains challenging due to limited active sites, poor electronic conductivity, and high overpotentials associated with the conventional adsorbate evolution mechanism (AEM). To address these limitations, a one-step spray drying method is employed to assemble high-surface-area La0.8Sr0.2CoO3 nanoparticles (LSCO-NP) into hierarchical supraparticles with ≈65% porosity and interconnected meso-/macropore networks. This architecture not only accelerates ion diffusion and interparticle electron transfer but also induces a mechanistic switch from the AEM to the lattice oxygen oxidation mechanism (LOM). La0.8Sr0.2CoO3 supraparticles (LSCO-SP) demonstrate significantly enhanced OER performance, requiring ∼300 mV lower overpotential at 100 mA cm-2 after 1 h compared to LSCO-NP. Moreover, LSCO-SP exhibit faster catalytic kinetics, evidenced by a smaller Tafel slope of 76.2 mV dec-1 versus 82.5 mV dec-1 and lower charge transfer resistance of 1.11 Ω versus 1.31 Ω for LSCO-NP. Structural analyses confirmed that the LSCO-SP maintained their integrity under OER conditions. Furthermore, post-mortem X-ray photoelectron spectroscopy (XPS) and electron paramagnetic resonance (EPR) analyses reveal an increased formation of oxygen vacancies (Ovac) in LSCO-SP, confirming that the supraparticle design tunes the lattice oxygen-mediated mechanism-oxygen vacancy site mechanism (LOM-OVSM), enhancing OER performance. The hierarchical structure of LSCO-SP highlights their potential as a novel building block for catalyst layers in renewable energy applications.
- 11 September 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
Supraparticle Assembly of La0.8Sr0.2CoO3 Nanoparticles for Enhanced Lattice Oxygen Oxidation in Alkaline Electrolysis
Developing effective non-noble metal electrocatalysts for the oxygen evolution reaction (OER) remains challenging due to limited active sites, poor electronic conductivity, and high overpotentials associated with the conventional adsorbate evolution mechanism (AEM). To address these limitations, a one-step spray drying method is employed to assemble high-surface-area La0.8Sr0.2CoO3 nanoparticles (LSCO-NP) into hierarchical supraparticles with ≈65% porosity and interconnected meso-/macropore networks. This architecture not only accelerates ion diffusion and interparticle electron transfer but also induces a mechanistic switch from the AEM to the lattice oxygen oxidation mechanism (LOM). La0.8Sr0.2CoO3 supraparticles (LSCO-SP) demonstrate significantly enhanced OER performance, requiring ∼300 mV lower overpotential at 100 mA cm-2 after 1 h compared to LSCO-NP. Moreover, LSCO-SP exhibit faster catalytic kinetics, evidenced by a smaller Tafel slope of 76.2 mV dec-1 versus 82.5 mV dec-1 and lower charge transfer resistance of 1.11 Ω versus 1.31 Ω for LSCO-NP. Structural analyses confirmed that the LSCO-SP maintained their integrity under OER conditions. Furthermore, post-mortem X-ray photoelectron spectroscopy (XPS) and electron paramagnetic resonance (EPR) analyses reveal an increased formation of oxygen vacancies (Ovac) in LSCO-SP, confirming that the supraparticle design tunes the lattice oxygen-mediated mechanism-oxygen vacancy site mechanism (LOM-OVSM), enhancing OER performance. The hierarchical structure of LSCO-SP highlights their potential as a novel building block for catalyst layers in renewable energy applications.
- Open Access
- 10 May 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 144, 1240-1256
The impact of ink processing on key characteristics of platinum detachment and pore structure to optimize fuel cell performance
- 10 May 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 144, 1240-1256
Open AccessThe impact of ink processing on key characteristics of platinum detachment and pore structure to optimize fuel cell performance
- Open Access
- 9 January 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (19)
A Proof‐of‐Principle Demonstration: Exploring the Effect of Anode Layer Microstructure on the Alkaline Oxygen Evolution Reaction
This study explores the effect of nickel cobalt oxide (Ni‐Co‐O) anode layer microstructure on the oxygen evolution reaction (OER). Four anodes with similar Ni‐Co‐O loadings and chemical characteristics but distinct morphologies are fabricated by ultrasonic spraying catalyst inks of varying solvent composition (pure water versus a water‐ethanol mixture) and drying temperatures (50 and 150 °C) on nickel (Ni) plates. Upon varying solvent composition, particles in the water‐based ink exhibited lower stability than particles in the water‐ethanol‐based ink, boosting the particle connectivity in the layers. This particle connectivity correlated with the mechanical strength of the layers, resulting in reduced contact resistance and enhanced activity. The second observation is that at 50 °C, the surface morphology exhibited hill‐like islands with higher roughness, while at 150 °C, concave hemispherical shapes with lower roughness are observed. From 2D‐distribution data, it is found that surface roughness correlated with the wettability with electrolyte. Roughness increased the lyophobicity and enhanced the activity through more accessible active sites and efficient bubble transport. This work highlights how microstructure affects macroscopic layer properties, and how these in turn can enhance or diminish the performance of the OER compared to bare Ni, offering insights into the knowledge‐based design of anode layers.
- 9 January 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (19)
Open AccessA Proof‐of‐Principle Demonstration: Exploring the Effect of Anode Layer Microstructure on the Alkaline Oxygen Evolution Reaction
This study explores the effect of nickel cobalt oxide (Ni‐Co‐O) anode layer microstructure on the oxygen evolution reaction (OER). Four anodes with similar Ni‐Co‐O loadings and chemical characteristics but distinct morphologies are fabricated by ultrasonic spraying catalyst inks of varying solvent composition (pure water versus a water‐ethanol mixture) and drying temperatures (50 and 150 °C) on nickel (Ni) plates. Upon varying solvent composition, particles in the water‐based ink exhibited lower stability than particles in the water‐ethanol‐based ink, boosting the particle connectivity in the layers. This particle connectivity correlated with the mechanical strength of the layers, resulting in reduced contact resistance and enhanced activity. The second observation is that at 50 °C, the surface morphology exhibited hill‐like islands with higher roughness, while at 150 °C, concave hemispherical shapes with lower roughness are observed. From 2D‐distribution data, it is found that surface roughness correlated with the wettability with electrolyte. Roughness increased the lyophobicity and enhanced the activity through more accessible active sites and efficient bubble transport. This work highlights how microstructure affects macroscopic layer properties, and how these in turn can enhance or diminish the performance of the OER compared to bare Ni, offering insights into the knowledge‐based design of anode layers.
- Open Access
- 9 December 2024
- Published by Open Engineering Inc in engrXiv
Ni-Co-O anodes for the alkaline oxygen evolution reaction: Multistage electrode optimization and plasma-assisted activity enhancement enabled by a coherent workflow
Ni-Co-based oxides (Ni-Co-O) are promising oxygen evolution reaction (OER) catalysts due to their adaptable structures, affordability, abundance, and strong electrochemical performance. While various studies explored the structure-activity relationships and OER mechanisms in these catalysts, comprehensive anode development requires a systematic workflow covering all stages of catalyst optimization. Here, we present an integrated approach for characterizing commercial Ni-Co-O nanomaterials using a combination of analytics during processing, in operando, and post-catalysis to gain insights into parameters influencing anode performance. Key findings include the critical impact of catalyst ink optimization through solvent matrix screening, enabling high-quality electrode layers via ultrasonic spray coating on Ni plates. These Ni-Co-O layers, tested as anodes in alkaline OER, were further enhanced by plasma post-processing, resulting in binder-free surfaces with increased porosity and wettability compared to untreated samples. Notably, plasma treatment also promoted a more redox reversible catalyst structure, improved Fe uptake efficiency, and led to a significantly enhanced OER activity by reducing the overpotential by ~43 mV at 100 mA/cm² compared to untreated samples. Our study highlights the importance of a holistic evaluation approach, from catalyst powder to post-mortem analysis, that enabled us to discover how plasma post-processing can yield binder-free electrodes with superior electrochemical properties.
- 9 December 2024
- Published by Open Engineering Inc in engrXiv
Open AccessNi-Co-O anodes for the alkaline oxygen evolution reaction: Multistage electrode optimization and plasma-assisted activity enhancement enabled by a coherent workflow
Ni-Co-based oxides (Ni-Co-O) are promising oxygen evolution reaction (OER) catalysts due to their adaptable structures, affordability, abundance, and strong electrochemical performance. While various studies explored the structure-activity relationships and OER mechanisms in these catalysts, comprehensive anode development requires a systematic workflow covering all stages of catalyst optimization. Here, we present an integrated approach for characterizing commercial Ni-Co-O nanomaterials using a combination of analytics during processing, in operando, and post-catalysis to gain insights into parameters influencing anode performance. Key findings include the critical impact of catalyst ink optimization through solvent matrix screening, enabling high-quality electrode layers via ultrasonic spray coating on Ni plates. These Ni-Co-O layers, tested as anodes in alkaline OER, were further enhanced by plasma post-processing, resulting in binder-free surfaces with increased porosity and wettability compared to untreated samples. Notably, plasma treatment also promoted a more redox reversible catalyst structure, improved Fe uptake efficiency, and led to a significantly enhanced OER activity by reducing the overpotential by ~43 mV at 100 mA/cm² compared to untreated samples. Our study highlights the importance of a holistic evaluation approach, from catalyst powder to post-mortem analysis, that enabled us to discover how plasma post-processing can yield binder-free electrodes with superior electrochemical properties.
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (28) , 2132
Unveiling a Binder-Free Approach through Plasma Treatment of NiCoO2 Anode Multi-Layer Coatings for Alkaline Water Electrolysis
Over the past decades, the challenge of sustainable energy production at low cost has persisted. Hydrogen emerges as a viable alternative fuel for various applications, yet its utilization faces hurdles. This particularly concerns the sluggish kinetics of the oxygen evolution reaction (OER) at the anode, necessitating higher input energy than theoretically optimal. Apart from an active electrocatalyst, the structure of the anode coating significantly influences performance [1-2-3]. Typically, fluorinated polymer compounds serve as a binder/ionomer, enhancing ionic transport during OER [4]. However, its exorbitant price and compliance with European Union regulations banning per- and polyfluoro substances (PFAS) poses challenges. One solution is to develop binder-free anodes. In this study, we explore the effectiveness of a nitrogen plasma treatment (PT) on catalyst-coated nickel plates with varying mass loadings to achieve binder-free and efficient OER performance. As a starting point, we utilized commercial nickel-cobalt-oxide (NiCoO2, Merck group), featuring processable primary particle sizes < 150 nm. Characterization of the powder involved various techniques including X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). Next, Hansen solubility parameters were recorded to select the suitable dispersant and an ink was prepared using an ethanol-water mixture. Ink stability was demonstrated through analytical centrifugation measurements analyzed by transmittograms [5]. Stable inks passing this quality gate were spray coated onto Ni metal plates with varying layer numbers of 40 (anode 40L), 80 (anode 80L), and 120 (anode 120 L), corresponding to mass loadings of 375 µg cm-2, 750 ug cm-2 and 1125 ug cm-2, respectively. Noteworthily, anode 40L exhibited incomplete catalyst coverage with visible substrate whereas anode 80L and anode 120L displayed a fully covered substrate. As these layers suffered from mechanical instability due to delamination, we added post-treatment by nitrogen plasma. All anodes were analyzed before and after plasma treatment in terms of their morphology, physico-chemical characteristics, and adhesion properties. The mechanical properties of these coatings were evaluated using an adhesion analyser, revealing enhanced adhesion strength for plasma treated samples compared to their as-prepared counterparts. Scanning electron microscopy (SEM) analysis exhibited notable morphological alterations in the plasma-treated samples as illustrated in Figure 1a-c. Two distinct morphologies were observed. In case of anode 40L with plasma treatment (40L PT), the sample displayed incomplete coverage and exhibited spherical clusters of agglomerates. In contrast, the fully coated anodes 80L PT and 120L PT showcased enhanced coverage and distinct agglomerates. Besides these morphological observations, energy dispersive X-ray (EDX) analysis and X-ray photoelectron spectroscopy (XPS) showcased a notable increase in the oxygen to metal ratio in anode 40L PT compared to anodes 80L PT and 120L PT. We attribute this to the synergistic interaction between the N2 plasma and the Ni plate substrate. This holds particularly for anode 40L PT, due to its low catalyst density and exposed Ni surface from the substrate which might have potentially induced the presence of oxygen molecules on the electrode surface. Finally, electrochemical measurements showed similar activity for the fully covered anodes 80L PT and 120L PT as shown in Figure 1d. This was expected due to very similar morphologies and surface properties evidenced by the chemical analysis. This indicates that higher mass loading does not increase the OER performance after PT. In contrast, anode 40L PT exhibited clearly superior performance with an overpotential value of 373 ± 3 mV. This can be potentially attributed to the higher abundance of oxides at the surface, which might have increased the amount of active sites in the anode. Our study highlights the potential of binder-free anodes for enhancing the efficiency of the OER in hydrogen production. By employing commercial NiCoO2 powder as an electrocatalyst, coated on nickel substrates and finally utilizing a post-nitrogen plasma treatment, we achieved optimization of properties among the different layers, resulting in improved OER performance. These findings provide valuable insights into advancing the development of efficient and sustainable energy production technologies, thereby facilitating progress towards binder-free innovations in the field of electrocatalysis. References: [1] M.-I. Jamesh and M. Harb, Journal of Energy Chemistry, 56, 299–342 (2021) [2] V. Vinayakumar et al., ECS Meeting Abstracts, MA2023-02, 2846–2846 (2023) [3] A. Jain et al., ChemCatChem, 16 (2024) [4] G. Li, D. Yang, and P. A. Chuang, ACS catalysis, 11688–11698 (2018) [5] S. Bapat and D. Segets, ACS Applied Nano Materials, 3, 7384–7391 (2020) Figure 1
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (28) , 2132
Unveiling a Binder-Free Approach through Plasma Treatment of NiCoO2 Anode Multi-Layer Coatings for Alkaline Water Electrolysis
Over the past decades, the challenge of sustainable energy production at low cost has persisted. Hydrogen emerges as a viable alternative fuel for various applications, yet its utilization faces hurdles. This particularly concerns the sluggish kinetics of the oxygen evolution reaction (OER) at the anode, necessitating higher input energy than theoretically optimal. Apart from an active electrocatalyst, the structure of the anode coating significantly influences performance [1-2-3]. Typically, fluorinated polymer compounds serve as a binder/ionomer, enhancing ionic transport during OER [4]. However, its exorbitant price and compliance with European Union regulations banning per- and polyfluoro substances (PFAS) poses challenges. One solution is to develop binder-free anodes. In this study, we explore the effectiveness of a nitrogen plasma treatment (PT) on catalyst-coated nickel plates with varying mass loadings to achieve binder-free and efficient OER performance. As a starting point, we utilized commercial nickel-cobalt-oxide (NiCoO2, Merck group), featuring processable primary particle sizes < 150 nm. Characterization of the powder involved various techniques including X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). Next, Hansen solubility parameters were recorded to select the suitable dispersant and an ink was prepared using an ethanol-water mixture. Ink stability was demonstrated through analytical centrifugation measurements analyzed by transmittograms [5]. Stable inks passing this quality gate were spray coated onto Ni metal plates with varying layer numbers of 40 (anode 40L), 80 (anode 80L), and 120 (anode 120 L), corresponding to mass loadings of 375 µg cm-2, 750 ug cm-2 and 1125 ug cm-2, respectively. Noteworthily, anode 40L exhibited incomplete catalyst coverage with visible substrate whereas anode 80L and anode 120L displayed a fully covered substrate. As these layers suffered from mechanical instability due to delamination, we added post-treatment by nitrogen plasma. All anodes were analyzed before and after plasma treatment in terms of their morphology, physico-chemical characteristics, and adhesion properties. The mechanical properties of these coatings were evaluated using an adhesion analyser, revealing enhanced adhesion strength for plasma treated samples compared to their as-prepared counterparts. Scanning electron microscopy (SEM) analysis exhibited notable morphological alterations in the plasma-treated samples as illustrated in Figure 1a-c. Two distinct morphologies were observed. In case of anode 40L with plasma treatment (40L PT), the sample displayed incomplete coverage and exhibited spherical clusters of agglomerates. In contrast, the fully coated anodes 80L PT and 120L PT showcased enhanced coverage and distinct agglomerates. Besides these morphological observations, energy dispersive X-ray (EDX) analysis and X-ray photoelectron spectroscopy (XPS) showcased a notable increase in the oxygen to metal ratio in anode 40L PT compared to anodes 80L PT and 120L PT. We attribute this to the synergistic interaction between the N2 plasma and the Ni plate substrate. This holds particularly for anode 40L PT, due to its low catalyst density and exposed Ni surface from the substrate which might have potentially induced the presence of oxygen molecules on the electrode surface. Finally, electrochemical measurements showed similar activity for the fully covered anodes 80L PT and 120L PT as shown in Figure 1d. This was expected due to very similar morphologies and surface properties evidenced by the chemical analysis. This indicates that higher mass loading does not increase the OER performance after PT. In contrast, anode 40L PT exhibited clearly superior performance with an overpotential value of 373 ± 3 mV. This can be potentially attributed to the higher abundance of oxides at the surface, which might have increased the amount of active sites in the anode. Our study highlights the potential of binder-free anodes for enhancing the efficiency of the OER in hydrogen production. By employing commercial NiCoO2 powder as an electrocatalyst, coated on nickel substrates and finally utilizing a post-nitrogen plasma treatment, we achieved optimization of properties among the different layers, resulting in improved OER performance. These findings provide valuable insights into advancing the development of efficient and sustainable energy production technologies, thereby facilitating progress towards binder-free innovations in the field of electrocatalysis. References: [1] M.-I. Jamesh and M. Harb, Journal of Energy Chemistry, 56, 299–342 (2021) [2] V. Vinayakumar et al., ECS Meeting Abstracts, MA2023-02, 2846–2846 (2023) [3] A. Jain et al., ChemCatChem, 16 (2024) [4] G. Li, D. Yang, and P. A. Chuang, ACS catalysis, 11688–11698 (2018) [5] S. Bapat and D. Segets, ACS Applied Nano Materials, 3, 7384–7391 (2020) Figure 1