Yeongsun Lee
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yeongsun Lee has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
- Yong-Su Na
Department of Nuclear Engineering, Seoul National University 1 , Seoul 08826
9 shared publications - Jong-Kyu Park
Seoul National University
8 shared publications - Jeongwon Lee
Korea Institute of Fusion Energy
5 shared publications - Pavel Aleynikov
Max-Planck-Institut für Plasmaphysik
5 shared publications - Peter C. De Vries
ITER Organization
5 shared publications - Hyun-Tae Kim
UKAEA, Abingdon, United Kingdom of Great Britain and Northern Ireland
4 shared publications
Latest Publications
- Open Access
- 7 October 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (12) , 126043
Revised error field assessment in KSTAR with profile diagnostics of resonant field penetration
The assessment of the n = 1 intrinsic error field in KSTAR has been revised in three respects. First, a local penetration timing criterion is defined from electron cyclotron emission (ECE) and charge exchange spectroscopy (CES) signatures near the reconstructed q = 2 surface. This timing determines the in-vessel control coil current used as the penetration threshold in the compass scan analysis. Second, the compass scans with the MID and OFFMID coils in 1.8 T L-mode plasmas indicate an intrinsic EF level up to an order of magnitude larger than the 2015 KSTAR reference value, implying that the intrinsic EF can change over extended operation and following hardware modifications. Third, the inferred EF direction is assessed by comparing the MID and OFFMID results in terms of the General Perturbed Equilibrium Code overlap field, where the two configurations give nearly the same direction despite their different poloidal spectra. A rotating resonant magnetic perturbation (RMP) experiment provides an additional dynamic check of this direction, with penetration observed near the phase predicted from the static MID scan. The reversed- B t comparison further constrains the possible source symmetry and is more compatible with a PF related contribution than with a TF dominated contribution, although the specific hardware source is not identified. These results provide an updated EF reference for KSTAR operation and motivate periodic reassessment of the intrinsic EF over the operational lifetime of the device.
- 7 October 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (12) , 126043
Open AccessRevised error field assessment in KSTAR with profile diagnostics of resonant field penetration
The assessment of the n = 1 intrinsic error field in KSTAR has been revised in three respects. First, a local penetration timing criterion is defined from electron cyclotron emission (ECE) and charge exchange spectroscopy (CES) signatures near the reconstructed q = 2 surface. This timing determines the in-vessel control coil current used as the penetration threshold in the compass scan analysis. Second, the compass scans with the MID and OFFMID coils in 1.8 T L-mode plasmas indicate an intrinsic EF level up to an order of magnitude larger than the 2015 KSTAR reference value, implying that the intrinsic EF can change over extended operation and following hardware modifications. Third, the inferred EF direction is assessed by comparing the MID and OFFMID results in terms of the General Perturbed Equilibrium Code overlap field, where the two configurations give nearly the same direction despite their different poloidal spectra. A rotating resonant magnetic perturbation (RMP) experiment provides an additional dynamic check of this direction, with penetration observed near the phase predicted from the static MID scan. The reversed- B t comparison further constrains the possible source symmetry and is more compatible with a PF related contribution than with a TF dominated contribution, although the specific hardware source is not identified. These results provide an updated EF reference for KSTAR operation and motivate periodic reassessment of the intrinsic EF over the operational lifetime of the device.
- Open Access
- 1 September 2026
- Published by AIP Publishing in Physics of Plasmas
- Vol. 33 (9)
Non-thermal electron cyclotron emission during runaway plateau in tokamak disruptions from a highly anisotropic dielectric tensor
During the runaway plateau phase in a tokamak, a cold background electron temperature of O(1 eV) forbids the onset of kinetic instability due to strong collisional damping. Nevertheless, non-thermal ECE anomalies at the level of 100 eV to keV have been observed in this phase without externally injected waves. To explore this, we characterize a highly anisotropic hot plasma medium with a Gaussian pitch-angle distribution. We derive an analytic hot plasma dielectric tensor, yielding direct expressions for the non-thermal emission coefficients and the kinetic instability drive rate. These analytic forms are verified against the KIAT and SYNO codes at small pitch-angle spread and are numerically complemented at large pitch-angle spread. Using the method of images, we define a fictitious global temperature of the entire plasma medium as measured by a horizontal ECE system. Because this representative medium temperature can exceed the keV level, the radiative temperature measured under incomplete wall reflection can be highly non-thermal without invoking any kinetic instability. This interpretation provides a conceptual basis for quantitative validation against experimental ECE measurements under realistic conditions.
- 1 September 2026
- Published by AIP Publishing in Physics of Plasmas
- Vol. 33 (9)
Open AccessNon-thermal electron cyclotron emission during runaway plateau in tokamak disruptions from a highly anisotropic dielectric tensor
During the runaway plateau phase in a tokamak, a cold background electron temperature of O(1 eV) forbids the onset of kinetic instability due to strong collisional damping. Nevertheless, non-thermal ECE anomalies at the level of 100 eV to keV have been observed in this phase without externally injected waves. To explore this, we characterize a highly anisotropic hot plasma medium with a Gaussian pitch-angle distribution. We derive an analytic hot plasma dielectric tensor, yielding direct expressions for the non-thermal emission coefficients and the kinetic instability drive rate. These analytic forms are verified against the KIAT and SYNO codes at small pitch-angle spread and are numerically complemented at large pitch-angle spread. Using the method of images, we define a fictitious global temperature of the entire plasma medium as measured by a horizontal ECE system. Because this representative medium temperature can exceed the keV level, the radiative temperature measured under incomplete wall reflection can be highly non-thermal without invoking any kinetic instability. This interpretation provides a conceptual basis for quantitative validation against experimental ECE measurements under realistic conditions.
- Open Access
- 23 March 2026
- Published by Cambridge University Press (CUP) in Journal of Plasma Physics
- Vol. 92 (2) , E32
Collision operator for electron runaway in cold weakly ionised plasmas
In cold weakly ionised plasmas, the Dreicer generation mechanism can be non-diffusive as demonstrated in a recent study. By expanding the previous letter, we present the detailed description of a proper collision operator to precisely account for the non-diffusive electron kinetics. The operator appropriately combines the Fokker–Planck operator and Boltzmann operator where free-bound collision cross-sections are valid in the low-energy region. The proposed operator is envisaged to predict runaway electron generation in cold weakly ionised plasmas, particularly to design a runaway-free reactor tokamak start-up.
- 23 March 2026
- Published by Cambridge University Press (CUP) in Journal of Plasma Physics
- Vol. 92 (2) , E32
Open AccessCollision operator for electron runaway in cold weakly ionised plasmas
In cold weakly ionised plasmas, the Dreicer generation mechanism can be non-diffusive as demonstrated in a recent study. By expanding the previous letter, we present the detailed description of a proper collision operator to precisely account for the non-diffusive electron kinetics. The operator appropriately combines the Fokker–Planck operator and Boltzmann operator where free-bound collision cross-sections are valid in the low-energy region. The proposed operator is envisaged to predict runaway electron generation in cold weakly ionised plasmas, particularly to design a runaway-free reactor tokamak start-up.
- Open Access
- 23 February 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (3) , 036043
Multi-machine validation of plasma initiation modelling and prospects for future devices: Predicting plasma initiation using only hardware design and control room input data
This paper reports on the generic prediction capability of full electromagnetic plasma initiation modelling with DYON, which was carried out for the first time in fusion research by the joint modelling of the International Tokamak Physics Activity—Integrating Operation Scenario group. The following devices were included in the experiment database: VEST (spherical torus, copper coils, Stainless steel wall, R / a = 0.3 m/0.2 m, V v = 3.7 m 3 ), MAST-U (spherical torus, copper coils, C wall, R / a = 0.7 m/0.5 m, V v = 55 m 3 ), EAST (conventional tokamak, superconducting coils, metallic wall, R / a = 1.85 m/0.5 m, V v = 38 m 3 ), DIII-D (conventional tokamak, copper coils, C wall, R / a = 1.67 m/0.65 m, V v = 35 m 3 ), and KSTAR (conventional tokamak, superconducting coils, C wall, R / a = 1.8 m/0.5 m, V v = 55 m 3 ). Despite the different hardware features of the devices, the required operating spaces of the loop voltage induction and prefill gas pressure for inductive plasma initiation in each device were successfully reproduced by the predictive simulations with DYON using only the individual hardware design and the control room input data for each discharge. This successful validation across multiple machines demonstrates that the full electromagnetic DYON modelling can capture the essential physics of inductive plasma initiation. The simulation settings commonly employed for all modelling and the modifications necessary to account for the discrepancies between individual devices are reported. Predictions for ITER based on the multi-machine validation indicate that a wide range of prefill gas pressures exists for the Townsend breakdown and the plasma burn-through (0.01–1.5 mPa).
- 23 February 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (3) , 036043
Open AccessMulti-machine validation of plasma initiation modelling and prospects for future devices: Predicting plasma initiation using only hardware design and control room input data
This paper reports on the generic prediction capability of full electromagnetic plasma initiation modelling with DYON, which was carried out for the first time in fusion research by the joint modelling of the International Tokamak Physics Activity—Integrating Operation Scenario group. The following devices were included in the experiment database: VEST (spherical torus, copper coils, Stainless steel wall, R / a = 0.3 m/0.2 m, V v = 3.7 m 3 ), MAST-U (spherical torus, copper coils, C wall, R / a = 0.7 m/0.5 m, V v = 55 m 3 ), EAST (conventional tokamak, superconducting coils, metallic wall, R / a = 1.85 m/0.5 m, V v = 38 m 3 ), DIII-D (conventional tokamak, copper coils, C wall, R / a = 1.67 m/0.65 m, V v = 35 m 3 ), and KSTAR (conventional tokamak, superconducting coils, C wall, R / a = 1.8 m/0.5 m, V v = 55 m 3 ). Despite the different hardware features of the devices, the required operating spaces of the loop voltage induction and prefill gas pressure for inductive plasma initiation in each device were successfully reproduced by the predictive simulations with DYON using only the individual hardware design and the control room input data for each discharge. This successful validation across multiple machines demonstrates that the full electromagnetic DYON modelling can capture the essential physics of inductive plasma initiation. The simulation settings commonly employed for all modelling and the modifications necessary to account for the discrepancies between individual devices are reported. Predictions for ITER based on the multi-machine validation indicate that a wide range of prefill gas pressures exists for the Townsend breakdown and the plasma burn-through (0.01–1.5 mPa).
- Open Access
Collision operator for electron runaway in cold weakly-ionized plasmas
In cold weakly-ionized plasmas, Dreicer generation mechanism can be non-diffusive as demonstrated in [Y. Lee et. al. Phys. Rev. Lett. 133 17 175102 (2024)]. By expanding the previous letter, we present the detailed description of a proper collision operator to precisely account for the non-diffusive electron kinetics. The operator appropriately combines the Fokker-Planck operator and Boltzmann operator where free-bound collision cross sections are valid in low energy region. The proposed operator is envisaged to predict runaway electrons generations in cold weakly-ionized plasmas, particularly to design a runaway-free reactor tokamak startup.
Open AccessCollision operator for electron runaway in cold weakly-ionized plasmas
In cold weakly-ionized plasmas, Dreicer generation mechanism can be non-diffusive as demonstrated in [Y. Lee et. al. Phys. Rev. Lett. 133 17 175102 (2024)]. By expanding the previous letter, we present the detailed description of a proper collision operator to precisely account for the non-diffusive electron kinetics. The operator appropriately combines the Fokker-Planck operator and Boltzmann operator where free-bound collision cross sections are valid in low energy region. The proposed operator is envisaged to predict runaway electrons generations in cold weakly-ionized plasmas, particularly to design a runaway-free reactor tokamak startup.
- Open Access
- 1 September 2025
- Published by AIP Publishing in Physics of Plasmas
- Vol. 32 (9)
Investigation of resonant layer response in electron viscosity regime
We present a supplementary study of previous work in Waybright and Park [Phys. Plasmas 31, 022502 (2024)] which demonstrates a substantial effect of electron viscosity on the resonant layer response to non-axisymmetric magnetic perturbations. A main refinement is to include a curl element of electron viscosity in the generalized Ohm's law. The refinement reveals a resonant layer response in the electron viscosity regime corresponding to slowly rotating and highly viscous plasmas.
- 1 September 2025
- Published by AIP Publishing in Physics of Plasmas
- Vol. 32 (9)
Open AccessInvestigation of resonant layer response in electron viscosity regime
We present a supplementary study of previous work in Waybright and Park [Phys. Plasmas 31, 022502 (2024)] which demonstrates a substantial effect of electron viscosity on the resonant layer response to non-axisymmetric magnetic perturbations. A main refinement is to include a curl element of electron viscosity in the generalized Ohm's law. The refinement reveals a resonant layer response in the electron viscosity regime corresponding to slowly rotating and highly viscous plasmas.
- Open Access
Investigation of resonant layer response in electron viscosity regime
We present a supplementary study of previous work in Waybright and Park [Phys. Plasmas 31, 022502 (2024)] which demonstrates a substantial effect of electron viscosity on the resonant layer response to non-axisymmetric magnetic perturbations. A main refinement is to include a curl element of electron viscosity in the generalized Ohm's law. The refinement reveals a resonant layer response in the Electron Viscosity (EV) regime corresponding to slowly rotating and highly viscous plasmas.
Open AccessInvestigation of resonant layer response in electron viscosity regime
We present a supplementary study of previous work in Waybright and Park [Phys. Plasmas 31, 022502 (2024)] which demonstrates a substantial effect of electron viscosity on the resonant layer response to non-axisymmetric magnetic perturbations. A main refinement is to include a curl element of electron viscosity in the generalized Ohm's law. The refinement reveals a resonant layer response in the Electron Viscosity (EV) regime corresponding to slowly rotating and highly viscous plasmas.
- Open Access
- 12 June 2025
- Published by IOP Publishing in Nuclear Fusion
- Vol. 65 (7) , 076021
Enhancing energy confinement through controlled boronization in VEST ohmic discharges
An enhanced energy confinement regime with minimized radiative losses has been observed by controlled boronization (BZn) in the Versatile Experimental Spherical Torus (VEST), achieving H 89 − P ∼ 2.0 without any external fueling. Previously, during the ohmic operation in VEST, the dominant radiative power losses caused by impurity influx continuously increased with the input power, reaching up to 1.4 MW, which resulted in the energy confinement time of H 89 − P ∼ 0.5 . To suppress radiative power losses, the BZn system, employing carborane ( C 2 B 10 H 12 ) with an expanded coverage range, is utilized as the final step in the wall-conditioning sequence. As the dose of BZn increased from 0 g to 0.2 g, the radiative losses were successfully suppressed to nearly negligible levels during ohmic discharges, eventually enhancing the energy confinement. However, as the dose increases further, the reacceleration of radiative losses is observed, suggesting that the optimal dose of BZn for radiative loss minimization is 0.2 g. Finally, the controlled BZn at the optimal point resulted in an increase in the energy confinement time by a factor of 2 compared to the 0 g dosed case. In this work, we envisage to optimize the BZn dose to minimize radiative power losses in upcoming fusion reactors.
- 12 June 2025
- Published by IOP Publishing in Nuclear Fusion
- Vol. 65 (7) , 076021
Open AccessEnhancing energy confinement through controlled boronization in VEST ohmic discharges
An enhanced energy confinement regime with minimized radiative losses has been observed by controlled boronization (BZn) in the Versatile Experimental Spherical Torus (VEST), achieving H 89 − P ∼ 2.0 without any external fueling. Previously, during the ohmic operation in VEST, the dominant radiative power losses caused by impurity influx continuously increased with the input power, reaching up to 1.4 MW, which resulted in the energy confinement time of H 89 − P ∼ 0.5 . To suppress radiative power losses, the BZn system, employing carborane ( C 2 B 10 H 12 ) with an expanded coverage range, is utilized as the final step in the wall-conditioning sequence. As the dose of BZn increased from 0 g to 0.2 g, the radiative losses were successfully suppressed to nearly negligible levels during ohmic discharges, eventually enhancing the energy confinement. However, as the dose increases further, the reacceleration of radiative losses is observed, suggesting that the optimal dose of BZn for radiative loss minimization is 0.2 g. Finally, the controlled BZn at the optimal point resulted in an increase in the energy confinement time by a factor of 2 compared to the 0 g dosed case. In this work, we envisage to optimize the BZn dose to minimize radiative power losses in upcoming fusion reactors.
- Open Access
- 25 April 2025
- Published by IOP Publishing in Nuclear Fusion
- Vol. 65 (5) , 056038
Modelling of electron cyclotron energy gain in the tokamak pre-ionization phase
This work presents a model for predicting electron energy gain from electron cyclotron (EC) wave–particle interactions during the breakdown phase of tokamak pre-ionization. Investigation of this phase to infer the EC requirements inevitably demands high-fidelity simulation study covering gas breakdown physics, plasma dynamics, and EC absorption. Under the significantly low density and temperature, electrons interact nonlinearly with EC wave and gain energy of which picture is distinct from the linear or quasilinear EC heating. For room temperature electrons, analytic estimates of energy gain have been derived using adiabatic nonlinear theory (Farina 2018 Nucl. Fusion 58 066012). However, electrons with large incident perpendicular energy can be generated from the ionization reactions and even be present in the Maxwellian tail during the breakdown. In this work, we refined the theory into a semi-analytic form that predicts nonlinear energy gain of arbitrary perpendicular energy. The semi-analytic model is demonstrated to be accurate and efficient in calculating macroscopic electron energy absorption: the expected total absorbed energies agree well with the numerical counterparts for key characteristic electron distributions, and computation time is significantly reduced by several orders of magnitude. This work is envisaged to offer a practical tool for electron avalanche dynamics study, contributing to development of predictive capability on EC pre-ionization phase of future tokamaks such as ITER and K-DEMO.
- 25 April 2025
- Published by IOP Publishing in Nuclear Fusion
- Vol. 65 (5) , 056038
Open AccessModelling of electron cyclotron energy gain in the tokamak pre-ionization phase
This work presents a model for predicting electron energy gain from electron cyclotron (EC) wave–particle interactions during the breakdown phase of tokamak pre-ionization. Investigation of this phase to infer the EC requirements inevitably demands high-fidelity simulation study covering gas breakdown physics, plasma dynamics, and EC absorption. Under the significantly low density and temperature, electrons interact nonlinearly with EC wave and gain energy of which picture is distinct from the linear or quasilinear EC heating. For room temperature electrons, analytic estimates of energy gain have been derived using adiabatic nonlinear theory (Farina 2018 Nucl. Fusion 58 066012). However, electrons with large incident perpendicular energy can be generated from the ionization reactions and even be present in the Maxwellian tail during the breakdown. In this work, we refined the theory into a semi-analytic form that predicts nonlinear energy gain of arbitrary perpendicular energy. The semi-analytic model is demonstrated to be accurate and efficient in calculating macroscopic electron energy absorption: the expected total absorbed energies agree well with the numerical counterparts for key characteristic electron distributions, and computation time is significantly reduced by several orders of magnitude. This work is envisaged to offer a practical tool for electron avalanche dynamics study, contributing to development of predictive capability on EC pre-ionization phase of future tokamaks such as ITER and K-DEMO.
- Open Access
- 31 March 2025
- Published by IOP Publishing in Nuclear Fusion
- Vol. 65 (5) , 056001
Comparison of start-up runaway electron generation simulations using the SCENPLINT code with JET experimental observations
This paper explores the process of runaway electron (RE) formation during the start-up of a tokamak discharge. This has been done by simulating the process of RE generation and, importantly their losses, self-consistently with the behavior of many other discharge parameters, using the SCENPLINT code, which has been updated to include RE physics. For the first time, an attempt is made to compare such simulations with experimental observations on start-up RE formation at JET. This proved to be a difficult task due to the many parameters that are self-consistently calculated by the code, the possible explosive growth of RE and the fact that the diagnosis of the simulated parameters is not always very accurate. A sensitivity study on the impact of various simulation assumptions was conducted. It was found that because during the JET start-up the ratio of the electric field to the critical electric field, E/E c is limited, using the secondary generation model proposed by Aleynikov and Breizman (Phys. Rev. Lett. 114 155001) ensures a better match to the experimental observations. This model predicts a reduced secondary generation when E/E c < 5 for start-up plasmas. Furthermore, the simulation results depended strongly on the assumed level of RE losses. Assuming the RE confinement time scales with the discharge current provide a better result. It was not, however, possible to determine which RE loss model, one based on drift-orbit losses or another based on RE diffusion due to magnetic turbulence, provided a better match to the experimental observations. These findings will be crucial to improve predictions of start-up RE formation in future devices such as ITER.
- 31 March 2025
- Published by IOP Publishing in Nuclear Fusion
- Vol. 65 (5) , 056001
Open AccessComparison of start-up runaway electron generation simulations using the SCENPLINT code with JET experimental observations
This paper explores the process of runaway electron (RE) formation during the start-up of a tokamak discharge. This has been done by simulating the process of RE generation and, importantly their losses, self-consistently with the behavior of many other discharge parameters, using the SCENPLINT code, which has been updated to include RE physics. For the first time, an attempt is made to compare such simulations with experimental observations on start-up RE formation at JET. This proved to be a difficult task due to the many parameters that are self-consistently calculated by the code, the possible explosive growth of RE and the fact that the diagnosis of the simulated parameters is not always very accurate. A sensitivity study on the impact of various simulation assumptions was conducted. It was found that because during the JET start-up the ratio of the electric field to the critical electric field, E/E c is limited, using the secondary generation model proposed by Aleynikov and Breizman (Phys. Rev. Lett. 114 155001) ensures a better match to the experimental observations. This model predicts a reduced secondary generation when E/E c < 5 for start-up plasmas. Furthermore, the simulation results depended strongly on the assumed level of RE losses. Assuming the RE confinement time scales with the discharge current provide a better result. It was not, however, possible to determine which RE loss model, one based on drift-orbit losses or another based on RE diffusion due to magnetic turbulence, provided a better match to the experimental observations. These findings will be crucial to improve predictions of start-up RE formation in future devices such as ITER.