LPLeonie Pap

Leonie Pap

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Leonie Pap has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A simple and robust method to quantify exciton dissociation efficiency with high precision in non-fullerene organic solar cells

    by Jared Faisst, Mathias List, Leonie Pap, Reid Kenneth Welland Patterson, Uli Würfel, Andreas W. Bett

    This study introduces a framework to determine exciton dissociation efficiency in non-fullerene organic solar cells with high precision by correlating exciton photoluminescence, current density, and absorptance across donor–acceptor ratios.


  • Open Access

    Exciton Dissociation Efficiency in Organic Solar Cells Quantified Via Thermally Induced Acceptor Aggregation and Photoluminescence Analysis

    by Jared Faisst, Reid Patterson, Mathias List, Leonie Pap, Yi Thomann, David Müller, Stefan W. Glunz, Andreas W. Bett, Uli Würfel

    The performance of organic photovoltaics (OPVs) depends critically on the efficiency of exciton dissociation at donor–acceptor interfaces, which is strongly influenced by the morphology. This work presents a method for quantifying the exciton dissociation efficiency leveraging the effect of thermally induced acceptor aggregation. The latter leads to an increase in the volume of pure domains, thereby hindering dissociation and increasing the recombination of excitons. As a result, the photocurrent decreases, while the photoluminescence (PL) of the non‐dissociated excitons increases. By correlating changes in absorptance, generated current and PL intensity over aging time, the method delivers robust estimates of the exciton dissociation efficiency, yielding 92.8% for the photoactive material PV‐X plus and 95.9% for PM6:DTY6 in their unaged state. The method also captures the decline in dissociation efficiency with aging, demonstrating that acceptor aggregation can become a significant performance‐limiting factor. Optical simulations of the device stacks reproduce the initial exciton dissociation efficiencies within their respective uncertainties, suggesting that exciton dissociation limits the internal quantum efficiency. However, the associated error margins are considerably larger, which underscores the enhanced accuracy of the proposed method and its suitability for diagnosing morphology‐related losses in OPV performance.


  • Open Access

    Metal‐Less Top Electrode Semitransparent Organic Solar Modules with an Average Visible Transmission of 51% and a Light Utilization Efficiency of 4%

    by Leonie Pap, Mathias List, René Haberstroh, Lasse Bienkowski, Martin Mattenheimer, Thomas Kroyer, Jared Faisst, Birger Zimmermann, Uli Würfel

    Semitransparent organic modules (STOMs) are of particular interest due to potential applications in building‐integrated photovoltaics though upscaling without significant performance losses while ensuring an aesthetic appearance for window applications remains a major research obstacle. This study presents two types of STOMs with an area of 11.4 cm2, exhibiting homogeneous appearance while retaining up to 92% of their respective small‐area cell power conversion efficiency (PCE). Precise laser structuring minimized the area loss originating from the sub‐cell series interconnection, allowing narrow cell stripes down to 1.25 mm. This enables a metal‐less top electrode composed solely of PEDOT:PSS without compromising fill factor. For a module, an additional challenge is to ensure a low resistance series interconnection between sub‐cells. This is realized with a novel approach based on a direct contact between PEDOT:PSS and a thin Ag layer within the back electrode. For the first design, the latter incorporates Al‐doped ZnO and Ag attaining a PCE of 6.1% with an average visible transmission (AVT) of 47.5%. A more elaborate design features an extended back electrode using TiO2 and SiO2 for improved optical performance (PCE = 7.9%), reaching an unprecedented AVT of 50.8% and a light utilization efficiency (LUE = AVT x PCE) of 4.0%.


  • Open Access

    Dielectric Bragg Reflector as Back Electrode for Semi‐Transparent Organic Solar Cells with an Average Visible Transparency of 52%

    by Leonie Pap, Bertolt Schirmacher, Esther Bloch, Clemens Baretzky, Birger Zimmermann, Uli Würfel

    A crucial challenge in the development of semi‐transparent solar cells is to maintain a reasonable power conversion efficiency (PCE) while reaching a high average visible transparency (AVT). Typically, organic semiconductors are favorable for this application since they can selectively absorb infrared light while transmitting visible light. This ability stems from limited electronic states at high(er) energies in contrast to inorganic semiconductors with their typical rise of the absorption coefficient toward higher photon energies. To increase PCE at high AVTs, a series of infrared dielectric Bragg reflectors is developed for semi‐transparent organic solar cells. Using the multi‐layered back electrode (TiO2|SiN|TiO2|AZO|Ag|AZO) with PV‐X Plus as photoactive layer and a metal‐free PEDOT:PSS top electrode, a light utilization efficiency (LUE = AVT × PCE) of up to 4.32% is achieved, together with an AVT of 47.9%. Although the short circuit current and AVT agree well with optical simulations, a low fill factor (FF) and partial shunting limit the overall device performance. Using ZnO and PFN‐Br as additional electron transport layers and modifying the back electrode stack (TiO2|SiO2|TiO2|AZO|Ag|AZO) accordingly leads to an LUE of up to 4.6% with a remarkable AVT of 51.9% and a maximum PCE of 8.79%.


  • Open Access

    Organic photo-battery with high operating voltage using a multi-junction organic solar cell and an organic redox-polymer-based battery

    by Rodrigo Delgado Andrés, Robin Wessling, Jan Büttner, Leonie Pap, Anna Fischer, Birgit Esser, Uli Würfel

    The demand for small energy devices capable of powering consumer electronics in the frame of the Internet of Things is ever increasing. The constraints placed on the size of these devices requires the design of power sources in the most compact way, for which a viable solution is the combination of energy harvesting and storage in one power pack. Herein, we report on a fully integrated monolithic organic photo-battery, consisting of an organic polymer-based battery, powered by a multi-junction organic solar cell capable of charging up to voltages as high as 4.2 V under varying illumination conditions. The full device demonstrated fast photo-charging within minutes and supplied on demand discharge capacities of up to 22 mAh g−1 (regarding battery active material) with average discharge potentials of 3.6 V vs. Li/Li+. The combined device constitutes the first monolithically integrated photo-battery made from organic building blocks capable of reaching competitive voltages sufficiently high for use in small, mobile power devices


  • Open Access

    Improved Light Utilization Efficiency for an ITO‐Free Semitransparent Organic Solar Cell Using a Multilayer Silver Back Electrode as Infrared Mirror

    by Leonie Pap, Bertolt Schirmacher, Esther Bloch, Shankar Bogati, Philipp Viehmann, Arnulf Scheel, David Müller, Mathias List, Birger Zimmermann, Uli Würfel

    Semitransparent organic solar cells (STOSCs) exhibit promising application as power‐generating windows in buildings and agricultural greenhouses. Due to unique optical properties of organic semiconductors, they can efficiently absorb near‐infrared light while maintaining a high degree semitransparency in the visible range. Since power conversion efficiency (PCE) and average visible transmission (AVT) frequently stand in a trade‐off relationship, a major challenge in improving the overall performance of STOSCs is maximizing the product of both, called light utilization efficiency (AVT × PCE = LUE). Herein, using multiple layers of aluminium‐doped ZnO (AZO) and silver as an infrared reflecting back electrode, in order to increase current generation while maintaining high visible transparency, is proposed. Using optical modeling, the optimal layer thickness of the AZO layer sandwiched between two Ag layers is determined, leading to an increased photocurrent generation of up to 10%. Simultaneously, experimental findings show that the fill factor decreases with an increasing AZO layer thickness. By adjusting the thickness of the photoactive layer, the blend concentration, and improving the top electrode material the thus‐far highest reported LUE for indium tin oxide‐free STOSCs is attained, reaching 4.0% with a PCE of 8.7% and an AVT of 46.3%.