Antonio-Miguel Muñoz-Gómez
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Antonio-Miguel Muñoz-Gómez has a total of 44 co-authors. Here are the top co-authors by number of shared publications:
- Javier Ballestín-Fuertes
CIRCE Foundation, Parque Empresarial Dinamiza, Avenida Ranillas Edificio 3D, 50018 Zaragoza, Spain
3 shared publications - José Francisco Sanz Osorio
IUIM of Energy and Resource Efficiency of Aragon (ENERGAIA), University of Zaragoza, 50018 Zaragoza, Spain
2 shared publications - Juan-Manuel Marredo-Píriz
Advanced Center for Aerospace Technologies (CATEC), La Rinconada, Seville, Spain
2 shared publications - Alejandro Suarez
GRVC Robotics Laboratory, Universidad de Sevilla, Seville, Spain
1 shared publication - Alfredo Felix Cota
Politecnico di Torino, Torino, Italy
1 shared publication - Alvaro Caballero
GRVC Robotics Laboratory, Universidad de Sevilla, Seville, Spain
1 shared publication
Latest Publications
- Open Access
- 6 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 70363-70385
The Future of Electric Mobility Between Technology, Business Acceptance, and Policy Making: Lessons Learned From the INCIT-EV Project
INCIT-EV was an European Project financed under the Horizon2020 programme, grant agreement number 875683, that involved over 30 partners, grouped in national consortia (Spain, France, Netherlands, Estonia and Italy) and developed 7 case studies aimed at experimenting with new charging solutions for Electric Vehicles (EV) and business models capable of fostering the adoption of EVs in the European Union (EU). The project successfully ended on 30/6/2024, and the present work is aimed at illustrating the results of the research activities and experimental tests carried out, with an in-depth outlook on the future of EV charging and EV adoption based on the information gathered and the experiences of this project regarding the technology development, the economics of the EV market and the importance of the policy making activities by the governance authorities and technical committees.
- 6 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 70363-70385
Open AccessThe Future of Electric Mobility Between Technology, Business Acceptance, and Policy Making: Lessons Learned From the INCIT-EV Project
INCIT-EV was an European Project financed under the Horizon2020 programme, grant agreement number 875683, that involved over 30 partners, grouped in national consortia (Spain, France, Netherlands, Estonia and Italy) and developed 7 case studies aimed at experimenting with new charging solutions for Electric Vehicles (EV) and business models capable of fostering the adoption of EVs in the European Union (EU). The project successfully ended on 30/6/2024, and the present work is aimed at illustrating the results of the research activities and experimental tests carried out, with an in-depth outlook on the future of EV charging and EV adoption based on the information gathered and the experiences of this project regarding the technology development, the economics of the EV market and the importance of the policy making activities by the governance authorities and technical committees.
- Open Access
- 4 March 2026
- Published by MDPI AG in Electronics
- Vol. 15 (5) , 1065
Design Methodology for Interleaved Converters Based on Coupled Inductors with ZVS and Closed-Loop Controllability Constraints
Intelligence, surveillance, and reconnaissance (ISR) platforms and electric vertical take-off and landing (eVTOL) aircraft demand onboard power conversion systems that simultaneously achieve high gravimetric power density, robustness, and fault-tolerance. In this context, modular battery architectures based on per-string power electronic interfaces emerge as a key enabler for voltage regulation, fault isolation, and in-flight reconfiguration. However, the stringent mass and volume constraints of electric aviation place magnetic components among the primary limiting factors of converter scalability. This paper presents a design methodology for interleaved converters with coupled inductors that explicitly decompose common-mode, differential-mode, and uncoupled inductance components. The proposed approach enables independent adjustment of current ripple and dynamic response, allowing zero-voltage switching (ZVS) operation while ensuring stable and controllable behavior under close-loop current regulation. The methodology is experimentally validated on a 4 kW two-phase interleaved GaN-based boost converter operating at 500 kHz. Experimental results demonstrate a peak efficiency of 97%, with less than 1% variation across the operating range, and stable dynamic behavior under load transients. These results confirm the effectiveness of the proposed design methodology as a scalable solution for high-power-density, high-reliability power converters in electric aviation battery systems.
- 4 March 2026
- Published by MDPI AG in Electronics
- Vol. 15 (5) , 1065
Open AccessDesign Methodology for Interleaved Converters Based on Coupled Inductors with ZVS and Closed-Loop Controllability Constraints
Intelligence, surveillance, and reconnaissance (ISR) platforms and electric vertical take-off and landing (eVTOL) aircraft demand onboard power conversion systems that simultaneously achieve high gravimetric power density, robustness, and fault-tolerance. In this context, modular battery architectures based on per-string power electronic interfaces emerge as a key enabler for voltage regulation, fault isolation, and in-flight reconfiguration. However, the stringent mass and volume constraints of electric aviation place magnetic components among the primary limiting factors of converter scalability. This paper presents a design methodology for interleaved converters with coupled inductors that explicitly decompose common-mode, differential-mode, and uncoupled inductance components. The proposed approach enables independent adjustment of current ripple and dynamic response, allowing zero-voltage switching (ZVS) operation while ensuring stable and controllable behavior under close-loop current regulation. The methodology is experimentally validated on a 4 kW two-phase interleaved GaN-based boost converter operating at 500 kHz. Experimental results demonstrate a peak efficiency of 97%, with less than 1% variation across the operating range, and stable dynamic behavior under load transients. These results confirm the effectiveness of the proposed design methodology as a scalable solution for high-power-density, high-reliability power converters in electric aviation battery systems.
- Open Access
- 8 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Field Robotics
- Vol. 2, 549-573
Multi-Aerial Robotic System for Power Line Inspection and Maintenance: Comparative Analysis From the AERIAL-CORE Final Experiments
This paper shows how different types of novel aerial robots with new functionalities can cooperate in the inspection and maintenance (I&M) of power lines, one of the largest and most essential civil infrastructures in any country. This study relies on the results from the AERIAL-CORE research and innovation project. The paper describes an I&M validation scenario and evaluation metrics for three linked operation domains: 1) long-range inspection for the detection of possible damages on power lines in a post-storm scenario, 2) aerial manipulation for the installation of devices on power lines, and 3) aerial co-working to help human operators in their activities at height. It presents the demonstration of ten different aerial robots in a real scenario with 10 km of power lines. The platforms include morphing-wing and VTOL (vertical take-off and landing) UAVs (unmanned aerial vehicles), multi-rotors, and aerial manipulators. These platforms, custom-developed or commercially available, are evaluated in the three application domains, describing the new functionalities implemented for each case. The paper ends with guidelines, design principles, and lessons learned for future developments derived from the final demonstration of the project.
- 8 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Field Robotics
- Vol. 2, 549-573
Open AccessMulti-Aerial Robotic System for Power Line Inspection and Maintenance: Comparative Analysis From the AERIAL-CORE Final Experiments
This paper shows how different types of novel aerial robots with new functionalities can cooperate in the inspection and maintenance (I&M) of power lines, one of the largest and most essential civil infrastructures in any country. This study relies on the results from the AERIAL-CORE research and innovation project. The paper describes an I&M validation scenario and evaluation metrics for three linked operation domains: 1) long-range inspection for the detection of possible damages on power lines in a post-storm scenario, 2) aerial manipulation for the installation of devices on power lines, and 3) aerial co-working to help human operators in their activities at height. It presents the demonstration of ten different aerial robots in a real scenario with 10 km of power lines. The platforms include morphing-wing and VTOL (vertical take-off and landing) UAVs (unmanned aerial vehicles), multi-rotors, and aerial manipulators. These platforms, custom-developed or commercially available, are evaluated in the three application domains, describing the new functionalities implemented for each case. The paper ends with guidelines, design principles, and lessons learned for future developments derived from the final demonstration of the project.
- Open Access
- 21 January 2025
- Published by MDPI AG in Electronics
- Vol. 14 (3) , 415
Single-Stage Power Converter for Magnetic Field Energy Harvesting to Achieve Self-Powered Smart Grid IoT Devices
Energy harvesting technologies are becoming increasingly popular as potential sources of energy for Internet of Things (IoT) devices. Magnetic field energy harvesting (MFEH) from current-carrying components, such as power cables, represents a particularly promising technology for smart grid, infrastructure, and environmental monitoring applications. This paper presents a single-stage AC/DC power converter, a control architecture, and an energy harvester design applicable to MFEH devices. The power converter consists of a MOSFET full bridge that is used to actively rectify the induced voltage at the transceiver while providing a regulated output voltage. The approach is suitable for a broad range of grid power lines, offering a compact power stage that achieves a reduction in component count while active rectification minimizes energy losses, thereby improving thermal management in power electronics compared with the previous research. The experimental results demonstrate that the power converter provides a stable energy source and offers an alternative to self-powering smart grid IoT devices.
- 21 January 2025
- Published by MDPI AG in Electronics
- Vol. 14 (3) , 415
Open AccessSingle-Stage Power Converter for Magnetic Field Energy Harvesting to Achieve Self-Powered Smart Grid IoT Devices
Energy harvesting technologies are becoming increasingly popular as potential sources of energy for Internet of Things (IoT) devices. Magnetic field energy harvesting (MFEH) from current-carrying components, such as power cables, represents a particularly promising technology for smart grid, infrastructure, and environmental monitoring applications. This paper presents a single-stage AC/DC power converter, a control architecture, and an energy harvester design applicable to MFEH devices. The power converter consists of a MOSFET full bridge that is used to actively rectify the induced voltage at the transceiver while providing a regulated output voltage. The approach is suitable for a broad range of grid power lines, offering a compact power stage that achieves a reduction in component count while active rectification minimizes energy losses, thereby improving thermal management in power electronics compared with the previous research. The experimental results demonstrate that the power converter provides a stable energy source and offers an alternative to self-powering smart grid IoT devices.
- Open Access
- 10 September 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (18) , 10175
A Novel Charging Station on Overhead Power Lines for Autonomous Unmanned Drones
Innovative drone-based technologies provide novel techniques to guarantee the safety and quality of power supply and to perform these tasks more efficiently. Electric multirotor drones, which are at the forefront of technology, face significant flight time limitations due to battery capacity and weight constraints that limit their autonomous operation. This paper presents a novel drone charging station that harvests energy from the magnetic field present in power lines to charge the drone’s battery. This approach relies on a charging station that is easy to install by the drone on an overhead AC power line without modifying the electrical infrastructure. This paper analyses the inductive coupling between the energy harvester and the power line, electrical protection, the power electronics required for maximum power point tracking and the mechanical design of the charging station. A drone that perches on a cable, an end effector for installation procedures and the charging maneuver are described, along with discussion of the robotic and electrical tests performed in a relevant environment. Finally, a lightweight drone charging station capable of harvesting 145 W of power from a 600 A line current is reported.
- 10 September 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (18) , 10175
Open AccessA Novel Charging Station on Overhead Power Lines for Autonomous Unmanned Drones
Innovative drone-based technologies provide novel techniques to guarantee the safety and quality of power supply and to perform these tasks more efficiently. Electric multirotor drones, which are at the forefront of technology, face significant flight time limitations due to battery capacity and weight constraints that limit their autonomous operation. This paper presents a novel drone charging station that harvests energy from the magnetic field present in power lines to charge the drone’s battery. This approach relies on a charging station that is easy to install by the drone on an overhead AC power line without modifying the electrical infrastructure. This paper analyses the inductive coupling between the energy harvester and the power line, electrical protection, the power electronics required for maximum power point tracking and the mechanical design of the charging station. A drone that perches on a cable, an end effector for installation procedures and the charging maneuver are described, along with discussion of the robotic and electrical tests performed in a relevant environment. Finally, a lightweight drone charging station capable of harvesting 145 W of power from a 600 A line current is reported.