AVAleksandr Voropay

Aleksandr Voropay

*This is an algorithmically generated author record based on publicly available information.

Aleksandr Voropay has a total of 13 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Исследование влияния плазменной обработки углеродного войлока на его электрохимические свойства

    by А.н. Воропай, Е.с. Осетров

    в наше время в мире быстро растет популярность ванадиевых проточных батарей в связи с более высокой стабильностью при длительной эксплуатации и низкими затратами при создании систем с длительным временем автономной работы. В то же время, исследования, направленные на разработку методов повышения электрокаталитической активности углеродных войлочных материалов по отношению к ионам ванадия, были в значительной степени разработаны для увеличения удельной мощности проточных ячеек, которые являются неотъемлемой частью ванадиевых проточных батарей. Одним из подходов к модификации этих материалов является плазменная обработка. В этой работе была проведена двухстадийная плазменная обработка углеродного войлока, сначала в среде одного газа, а затем в среде другого газа. В качестве газа выбраны кислород и азот. Было показано, что независимо от порядка, в котором проводится плазменная обработка, наблюдается схожая тенденция в значении разности потенциалов между пиком окисления и пиком восстановления, сначала она увеличивается на первой стадии, а затем уменьшается в второй этап. Однако обработка азотом на втором этапе имеет тенденцию к более быстрому (почти в 2 раза) уменьшению разности потенциалов, что мы наблюдаем в этой работе. nowadays, the popularity of vanadium flow batteries is rapidly growing in the world due to higher stability during long-term operation and low costs when creating systems with long battery life. At the same time, research aimed at developing methods to increase the electrocatalytic activity of carbon felt materials in relation to vanadium ions has been largely developed to increase the specific power of flow cells, which are an integral part of vanadium flow batteries. One of the approaches to the modification of these materials is plasma treatment. In this work, two-stage plasma treatment of carbon felt was carried out, first in the medium of one gas, and then in the medium of another gas. Oxygen and nitrogen are selected as the gas. It has been shown that regardless of the order in which plasma treatment is performed, there is a similar trend in the value of the potential difference between the peak of oxidation and the peak of reduction, first it increases in the first stage, and then decreases in the second stage. However, nitrogen treatment at the second stage tends to decrease the potential difference more rapidly (almost 2 times), which we observe in this work.

  • The Effect of the Thickness of a Carbon-Black Active Layer on the Properties of Combined Electrodes in a Cell of the Vanadium Redox Flow Battery

    by A. N. Voropay, E. D. Vladimir, E. S. Osetrov, A. A. Usenko, E. O. Deryabina, V. V. Zueva

    The development of vanadium redox flow batteries requires elaborating new materials to improve their performance. To date, the studies of electrode materials for these energy storage devices are focused on increasing their specific power and energy efficiency. It is known that the energy efficiency can be increased by reducing the electrode polarization, which hinders the transport of the ions that carry charge between half-elements. This can be achieved for an electrochemically active layer localized immediately near the membrane surface. For this purpose, it is proposed to use bilayer composite electrodes with the active layer localized immediately at the electrode/membrane boundary. For the active layer of carbon black CH210 and a PVDF binder with a loading of 20 mg/cm2, the energy efficiency stays and a level of 79.6% for the current density of 150 mA/cm2. However, an increase in the layer thickness reduces the discharge capacity to 1% of its initial value corresponding to the uncoated electrode at a current density of 25 mA/cm2. Thus, the development of an active layer on the surface of a commercially available GFD 4.6 EA material by airbrush spraying is a fairly simple way to increase the efficiency of the charge-discharge cycle for a cell in a vanadium redox flow battery.


  • Open Access

    Study of 10 kW Vanadium Flow Battery Discharge Characteristics at Different Load Powers

    by Ilia Rashitov, Aleksandr Voropay, Grigoriy Tsepilov, Ivan Kuzmin, Alexey Loskutov, Evgeny Osetrov, Andrey Kurkin, Ivan Lipuzhin

    Vanadium redox flow batteries are promising energy storage devices and are already ahead of lead–acid batteries in terms of installed capacity in energy systems due to their long service life and possibility of recycling. One of the crucial tasks today is the development of models for assessing battery performance and its residual resource based on the battery’s present state. A promising method for estimating battery capacity is based on analyzing present voltage and current values under various load conditions. This paper analyzes the discharge characteristics of a 10 kW all-vanadium redox flow battery at fixed load powers from 6 to 12 kW. A linear dependence of operating voltage and initial discharge voltage on load power is established. It is also determined that the slope of the discharge curve linear section does not increase linearly in absolute value, and the Box–Lucas model can be used to describe it. Models for predicting current VRFB capacity based on different curve fitting functions are proposed. These models can be used to roughly estimate battery capacity at different load powers.


  • Open Access

    Vanadium Redox Flow Battery Stack Balancing to Increase Depth of Discharge Using Forced Flow Attenuation

    by Ilia Rashitov, Aleksandr Voropay, Grigoriy Tsepilov, Ivan Kuzmin, Alexey Loskutov, Andrey Kurkin, Evgeny Osetrov, Ivan Lipuzhin

    Vanadium redox flow batteries are gaining great popularity in the world due to their long service life, simple (from a technological point of view) capacity increase and overload resistance, which hardly affects the service life. However, these batteries have technical problems, namely in balancing stacks with each other in terms of volumetric flow rate of electrolyte. Stack power depends on the speed of the electrolyte flow through the stack. Stacks are connected in parallel by electrolytes to increase battery power. If one of the stacks has a lower hydrodynamic resistance, the volume of electrolytes passing through it increases, which leads to a decrease in the efficiency of the remaining stacks in the system. This experimental study was conducted on a 10 kW uninterruptible power supply system based on two 5 kW stacks of all-vanadium redox flow batteries. It was demonstrated that forced flow attenuation in a circuit with low hydrodynamic resistance leads to an overall improvement in the system operation.