Zhixiang Dai
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Zhixiang Dai has a total of 52 co-authors. Here are the top co-authors by number of shared publications:
- Feng Wang
Natural Gas Gathering and Transmission Engineering Technology Research Institute, PetroChina Southwest Oil and Gas Field Company, Chengdu 610041, China
5 shared publications - Jun Zhou
Southwest Petroleum University
4 shared publications - Wei Zhang
Natural Gas Gathering and Transmission Engineering Technology Research Institute, PetroChina Southwest Oil and Gas Field Company, Chengdu 610041, China
4 shared publications - Dan Zhou
School of Intelligent Manufacturing, Panzhihua College, Panzhihua 617000, China
2 shared publications - Jie Sun
Southwest Petroleum University
2 shared publications - Qin Bie
Gathering and Transportation Engineering Technology Research Institute, PetroChina Southwest Oil & Gasfield Company, Chengdu 610041, China
2 shared publications
Latest Publications
- Open Access
- 24 September 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16  (19) , 9516
A Digital Delivery Framework for Precision Carbon Management in Gas Gathering Systems: From Tiered Accounting to Reduction Optimization
With the tightening of global methane regulations (EU Methane Regulation 2024/1787, U.S. EPA GHG rules, OGMP 2.0) and China’s dual-carbon commitments, precise and traceable carbon accounting for natural gas gathering systems has become an urgent engineering imperative. To tackle manual workflows, data isolation, low precision, and poor traceability in carbon accounting for natural gas field surface systems, this study develops a four-tier digital delivery framework. The main goal is to establish an end-to-end engineering paradigm that transforms carbon management from passive post-hoc statistics into an active, traceable decision-support tool. By embedding carbon attributes into seed files and adopting a unified one-code-through equipment coding scheme, static design data, dynamic SCADA measurements, and emission factor databases are interoperably consolidated within a central data hub. The hub implements a three-stage progressive accounting workflow and closed-loop emission mitigation. Methodologically, a three-tier progressive accounting model (Tier 1: system-level, Tier 2: process-level, Tier 3: equipment-level) is constructed, with Tier 3 supported by OGMP 2.0 source-level emission factors locally calibrated against 386 field LDAR measurements. Deployed at Gas Field A, the framework realizes full diagram-model consistency and narrows systematic error from ±30% to ±3.5%. Tier-2 accounting quantifies gathering, compression, and dehydration emissions at 322,000, 504,300, and 162,500 tCO2e, while Tier-3 analysis pinpoints reciprocating compressors and heaters as the primary contributors (51.70% of total emissions). Optimizations including compressor energy conservation, enhanced LDAR, and waste heat recovery provide an estimated annual mitigation potential of 97,400 tCO2e (10.10%). In conclusion, this framework mitigates data fragmentation and accuracy defects, delivering a transferable technical route for oil and gas operators to advance methane abatement and dual-carbon targets.
- 24 September 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16  (19) , 9516
Open AccessA Digital Delivery Framework for Precision Carbon Management in Gas Gathering Systems: From Tiered Accounting to Reduction Optimization
With the tightening of global methane regulations (EU Methane Regulation 2024/1787, U.S. EPA GHG rules, OGMP 2.0) and China’s dual-carbon commitments, precise and traceable carbon accounting for natural gas gathering systems has become an urgent engineering imperative. To tackle manual workflows, data isolation, low precision, and poor traceability in carbon accounting for natural gas field surface systems, this study develops a four-tier digital delivery framework. The main goal is to establish an end-to-end engineering paradigm that transforms carbon management from passive post-hoc statistics into an active, traceable decision-support tool. By embedding carbon attributes into seed files and adopting a unified one-code-through equipment coding scheme, static design data, dynamic SCADA measurements, and emission factor databases are interoperably consolidated within a central data hub. The hub implements a three-stage progressive accounting workflow and closed-loop emission mitigation. Methodologically, a three-tier progressive accounting model (Tier 1: system-level, Tier 2: process-level, Tier 3: equipment-level) is constructed, with Tier 3 supported by OGMP 2.0 source-level emission factors locally calibrated against 386 field LDAR measurements. Deployed at Gas Field A, the framework realizes full diagram-model consistency and narrows systematic error from ±30% to ±3.5%. Tier-2 accounting quantifies gathering, compression, and dehydration emissions at 322,000, 504,300, and 162,500 tCO2e, while Tier-3 analysis pinpoints reciprocating compressors and heaters as the primary contributors (51.70% of total emissions). Optimizations including compressor energy conservation, enhanced LDAR, and waste heat recovery provide an estimated annual mitigation potential of 97,400 tCO2e (10.10%). In conclusion, this framework mitigates data fragmentation and accuracy defects, delivering a transferable technical route for oil and gas operators to advance methane abatement and dual-carbon targets.
- Open Access
- 17 September 2025
- Published by MDPI AG in Automation
- Vol. 6  (3) , 46
Intelligent Fault Diagnosis of Gas Pressure Regulator Based on AE-GWO-SVM Algorithm
A pressure regulator is essential for pressure control in a gas transmission system. The traditional maintenance approaches for pressure regulators involve equipment disassembly that disrupts normal production. In response, this paper proposes a support vector machine (SVM) model improved by the grey wolf optimization algorithm (GWO) and autoencoder (AE), i.e., the AE-GWO-SVM model. It achieves intelligent fault diagnosis on pressure regulators based on operation data collected by the SCADA system. Firstly, a number of actual pressure regulator faults are counted, and it is found that internal and external leakages are key problems faced by pressure regulators. To address the limited fault data available in field practice, a dataset of pressure regulator faults is constructed using numerical simulation. Additionally, 18 new features are obtained through feature combination, and an improved distance evaluation method (IDE) is utilized to select highly correlated features as input for the machine learning model. Furthermore, an autoencoder (AE) is employed to overcome the interference from abnormal data, which significantly enhances the fault identification process of GWO-SVM. To verify the performance of the AE-GWO-SVM model, an experimental platform for pressure regulators is designed and constructed. Compared with conventional SVM, the accuracy of the AE-GWO-SVM model increases from 60.4% to 86.7%, indicating its strong diagnosis capability for pressure regulator faults.
- 17 September 2025
- Published by MDPI AG in Automation
- Vol. 6  (3) , 46
Open AccessIntelligent Fault Diagnosis of Gas Pressure Regulator Based on AE-GWO-SVM Algorithm
A pressure regulator is essential for pressure control in a gas transmission system. The traditional maintenance approaches for pressure regulators involve equipment disassembly that disrupts normal production. In response, this paper proposes a support vector machine (SVM) model improved by the grey wolf optimization algorithm (GWO) and autoencoder (AE), i.e., the AE-GWO-SVM model. It achieves intelligent fault diagnosis on pressure regulators based on operation data collected by the SCADA system. Firstly, a number of actual pressure regulator faults are counted, and it is found that internal and external leakages are key problems faced by pressure regulators. To address the limited fault data available in field practice, a dataset of pressure regulator faults is constructed using numerical simulation. Additionally, 18 new features are obtained through feature combination, and an improved distance evaluation method (IDE) is utilized to select highly correlated features as input for the machine learning model. Furthermore, an autoencoder (AE) is employed to overcome the interference from abnormal data, which significantly enhances the fault identification process of GWO-SVM. To verify the performance of the AE-GWO-SVM model, an experimental platform for pressure regulators is designed and constructed. Compared with conventional SVM, the accuracy of the AE-GWO-SVM model increases from 60.4% to 86.7%, indicating its strong diagnosis capability for pressure regulator faults.
- Open Access
- 14 August 2025
- Published by MDPI AG in Applied System Innovation
- Vol. 8  (4) , 113
Comprehensive Assessment Approach for the Design of Automatic Control Systems in Gas Field Stations
The design of automatic control systems is critical for ensuring safety in gas field surface engineering production. However, over-reliance on standardized design approaches within the context of automation technology can compromise system flexibility and neglect individualized cost-effectiveness considerations. This paper identifies a comprehensive evaluation method as the preferred approach for assessing station control systems by comparing the advantages and disadvantages of various common evaluation techniques. We propose an integrated semi-quantitative and quantitative evaluation method designed to comprehensively and accurately assess the effectiveness of station automatic control systems. For the semi-quantitative framework, we first establish a specific indicator system for the control system and employ the Analytic Hierarchy Process (AHP) to determine indicator weights tailored to different station types, achieving a scientific quantification of evaluation criteria. Additionally, we utilize quantitative calculation methods, specifically reliability and availability analyses, to evaluate the station’s automatic control system. Differential research is conducted to customize the evaluation based on the distinct process characteristics of various gas field stations. Differential design calculations and analyses were performed for a single station, improving the economy and adaptability of the automatic control system design. The proposed comprehensive evaluation method ensures the safe and stable operation of control system designs and provides a new approach for the automation and intelligent transformation of gas field surface engineering.
- 14 August 2025
- Published by MDPI AG in Applied System Innovation
- Vol. 8  (4) , 113
Open AccessComprehensive Assessment Approach for the Design of Automatic Control Systems in Gas Field Stations
The design of automatic control systems is critical for ensuring safety in gas field surface engineering production. However, over-reliance on standardized design approaches within the context of automation technology can compromise system flexibility and neglect individualized cost-effectiveness considerations. This paper identifies a comprehensive evaluation method as the preferred approach for assessing station control systems by comparing the advantages and disadvantages of various common evaluation techniques. We propose an integrated semi-quantitative and quantitative evaluation method designed to comprehensively and accurately assess the effectiveness of station automatic control systems. For the semi-quantitative framework, we first establish a specific indicator system for the control system and employ the Analytic Hierarchy Process (AHP) to determine indicator weights tailored to different station types, achieving a scientific quantification of evaluation criteria. Additionally, we utilize quantitative calculation methods, specifically reliability and availability analyses, to evaluate the station’s automatic control system. Differential research is conducted to customize the evaluation based on the distinct process characteristics of various gas field stations. Differential design calculations and analyses were performed for a single station, improving the economy and adaptability of the automatic control system design. The proposed comprehensive evaluation method ensures the safe and stable operation of control system designs and provides a new approach for the automation and intelligent transformation of gas field surface engineering.
- Open Access
Changes in Physical Parameters of CO2 Containing Impurities in the Exhaust Gas of the Purification Plant and Selection of Equations of State
CO2 transport is a crucial part of CCUS. Nonetheless, due to the physical property differences between CO2 and natural gas and oil, CO2 pipeline transport is distinct from natural gas and oil transport. Gaseous CO2 transportation has become the preferred scheme for transporting impurity-containing CO2 tail gas in purification plants due to its advantages of simple technology, low cost, and high safety, which are well suited to the scenarios of low transportation volume and short distance in purification plants. The research on its physical property and state parameters is precisely aimed at optimizing the process design of gaseous transportation so as to further improve transportation efficiency and safety. Therefore, it has important engineering practical significance. Firstly, this paper collected and analyzed the research cases of CO2 transport both domestically and internationally, revealing that phase state and physical property testing of CO2 gas containing impurities is the basic condition for studying CO2 transport. Subsequently, the exhaust gas captured by the purification plant was captured after hydrodesulfurization treatment, and the characteristics of the exhaust gas components were obtained by comparing before and after treatment. By preparing fluid samples with varied CO2 content and conducting the flash evaporation test and PV relationship test, the compression factor and density of natural gas under different temperatures and pressures were obtained. It is concluded that under the same pressure in general, the higher the CO2 content, the smaller the compression factor. Except for pure CO2, the higher the CO2 content, the higher the density under constant pressure, which is related to the content of C2 and heavier hydrocarbon components. At the same temperature, the higher the CO2 content, the higher the viscosity under the same pressure; the lower the pressure, the slower the viscosity growth slows down. The higher the CO2 content at the same temperature, the higher the specific heat at constant pressure. With the decrease in temperature, the CO2 content reaching the highest specific heat at the identical pressure gradually decreases. Finally, BWRS, PR, and SRK equations of state were utilized to calculate the compression factor and density of the gas mixture with a molar composition of 50% CO2 and the gas mixture with a molar composition of 100% CO2. Compared with the experimental results, the most suitable equation of state is selected as the PR equation, which refers to the parameter setting of critical nodes of CO2 gas transport.
Open AccessChanges in Physical Parameters of CO2 Containing Impurities in the Exhaust Gas of the Purification Plant and Selection of Equations of State
CO2 transport is a crucial part of CCUS. Nonetheless, due to the physical property differences between CO2 and natural gas and oil, CO2 pipeline transport is distinct from natural gas and oil transport. Gaseous CO2 transportation has become the preferred scheme for transporting impurity-containing CO2 tail gas in purification plants due to its advantages of simple technology, low cost, and high safety, which are well suited to the scenarios of low transportation volume and short distance in purification plants. The research on its physical property and state parameters is precisely aimed at optimizing the process design of gaseous transportation so as to further improve transportation efficiency and safety. Therefore, it has important engineering practical significance. Firstly, this paper collected and analyzed the research cases of CO2 transport both domestically and internationally, revealing that phase state and physical property testing of CO2 gas containing impurities is the basic condition for studying CO2 transport. Subsequently, the exhaust gas captured by the purification plant was captured after hydrodesulfurization treatment, and the characteristics of the exhaust gas components were obtained by comparing before and after treatment. By preparing fluid samples with varied CO2 content and conducting the flash evaporation test and PV relationship test, the compression factor and density of natural gas under different temperatures and pressures were obtained. It is concluded that under the same pressure in general, the higher the CO2 content, the smaller the compression factor. Except for pure CO2, the higher the CO2 content, the higher the density under constant pressure, which is related to the content of C2 and heavier hydrocarbon components. At the same temperature, the higher the CO2 content, the higher the viscosity under the same pressure; the lower the pressure, the slower the viscosity growth slows down. The higher the CO2 content at the same temperature, the higher the specific heat at constant pressure. With the decrease in temperature, the CO2 content reaching the highest specific heat at the identical pressure gradually decreases. Finally, BWRS, PR, and SRK equations of state were utilized to calculate the compression factor and density of the gas mixture with a molar composition of 50% CO2 and the gas mixture with a molar composition of 100% CO2. Compared with the experimental results, the most suitable equation of state is selected as the PR equation, which refers to the parameter setting of critical nodes of CO2 gas transport.
- Open Access
Multi-Source Heterogeneous Data-Driven Digital Delivery System for Oil and Gas Surface Engineering
To address the challenges of data fragmentation, inconsistent standards, and weak interactivity in oil and gas field surface engineering, this study proposes an intelligent delivery system integrated with three-dimensional dynamic modeling. Utilizing a layered collaborative framework, the system combines optimization algorithms and anomaly detection methods during data processing to enhance the relevance and reliability of high-dimensional data. The model construction adopts a structured data architecture and dynamic governance strategies, supporting multi-project secure collaboration and full lifecycle data management. At the application level, it integrates three-dimensional visualization and semantic parsing capabilities to achieve interactive display and intelligent analysis of cross-modal data. Validated through practical engineering cases, the platform enables real-time linkage of equipment parameters, documentation, and three-dimensional models, significantly improving data integration efficiency and decision-making capabilities. This advancement drives the transformation of oil and gas field engineering toward intelligent and knowledge-driven practices.
Open AccessMulti-Source Heterogeneous Data-Driven Digital Delivery System for Oil and Gas Surface Engineering
To address the challenges of data fragmentation, inconsistent standards, and weak interactivity in oil and gas field surface engineering, this study proposes an intelligent delivery system integrated with three-dimensional dynamic modeling. Utilizing a layered collaborative framework, the system combines optimization algorithms and anomaly detection methods during data processing to enhance the relevance and reliability of high-dimensional data. The model construction adopts a structured data architecture and dynamic governance strategies, supporting multi-project secure collaboration and full lifecycle data management. At the application level, it integrates three-dimensional visualization and semantic parsing capabilities to achieve interactive display and intelligent analysis of cross-modal data. Validated through practical engineering cases, the platform enables real-time linkage of equipment parameters, documentation, and three-dimensional models, significantly improving data integration efficiency and decision-making capabilities. This advancement drives the transformation of oil and gas field engineering toward intelligent and knowledge-driven practices.
- Open Access
Analysis and Control of Abnormal Wear of Reciprocating Compressors in Natural Gas Underground Storage Caverns
Throughout China’s 14th five-year plan, the national natural gas pipeline network has been interconnected, and the gas quality became increasingly complex. A certain amount of dust particles widely spread in the natural gas pipeline and lead to abnormal wear of the reciprocating compressor’s compression cylinder within the underground storage cavern. The wear characteristics of the compression cylinder are effectively demonstrated based on the tangential impact energy model, and combined with field measurement and the moving-grid method of computational fluid dynamics. The results reveal that the lubricating oil forms “grinding paste” when mixed with dust particles. With an increase in the dust mass concentration from 0.01% to 3.00%, the viscosity of the “grinding paste” increases from 450,800 mPa·s to 1,274,000 mPa·s, and the density increases from 890 kg/m3 to 980 kg/m3. The abnormal wear frequently occurs at the 12 o’clock and 6 o’clock directions of the compression cylinder. When the piston is in the midpoint of the stroke, the wall shear rate and the wear rate are the highest. When the piston is at both endpoints of the stroke, the wall shear rate and the wear rate are the lowest. For every 1000 h of operation without repairing the cylinder, the dust concentration should be controlled below 0.60%. For every 5000 h and 10,000 h of operation without replacing the cylinder, the dust concentration should be controlled below 1.3% and 0.4%. When the dust mass concentration is 0.01%, the wear rate decreases with decreasing lubricating oil viscosity. When the dust mass concentration is 0.51% and 1.0%, and the lubricating oil viscosities are 259,700 mPa·s, 220,500 mPa·s, and 196,980 mPa·s, the wear rate increases dramatically with decreasing lubricating oil viscosity.
Open AccessAnalysis and Control of Abnormal Wear of Reciprocating Compressors in Natural Gas Underground Storage Caverns
Throughout China’s 14th five-year plan, the national natural gas pipeline network has been interconnected, and the gas quality became increasingly complex. A certain amount of dust particles widely spread in the natural gas pipeline and lead to abnormal wear of the reciprocating compressor’s compression cylinder within the underground storage cavern. The wear characteristics of the compression cylinder are effectively demonstrated based on the tangential impact energy model, and combined with field measurement and the moving-grid method of computational fluid dynamics. The results reveal that the lubricating oil forms “grinding paste” when mixed with dust particles. With an increase in the dust mass concentration from 0.01% to 3.00%, the viscosity of the “grinding paste” increases from 450,800 mPa·s to 1,274,000 mPa·s, and the density increases from 890 kg/m3 to 980 kg/m3. The abnormal wear frequently occurs at the 12 o’clock and 6 o’clock directions of the compression cylinder. When the piston is in the midpoint of the stroke, the wall shear rate and the wear rate are the highest. When the piston is at both endpoints of the stroke, the wall shear rate and the wear rate are the lowest. For every 1000 h of operation without repairing the cylinder, the dust concentration should be controlled below 0.60%. For every 5000 h and 10,000 h of operation without replacing the cylinder, the dust concentration should be controlled below 1.3% and 0.4%. When the dust mass concentration is 0.01%, the wear rate decreases with decreasing lubricating oil viscosity. When the dust mass concentration is 0.51% and 1.0%, and the lubricating oil viscosities are 259,700 mPa·s, 220,500 mPa·s, and 196,980 mPa·s, the wear rate increases dramatically with decreasing lubricating oil viscosity.
- Open Access
Construction Method and Practical Application of Oil and Gas Field Surface Engineering Case Database Based on Knowledge Graph
To address the challenge of quickly and efficiently accessing relevant management experience for a wide range of ground engineering construction projects, supporting project management with information technology is crucial. This includes the establishment of a case database and an application platform for intelligent search and recommendations. The article leverages Optical Character Recognition (OCR) technology, knowledge graph technology, and Natural Language Processing (NLP) technology. It explores the mechanisms for classifying construction cases, methods for constructing a case database, structuring case data, intelligently retrieving and matching cases, and intelligent recommendation methods. This research forms a complete, feasible, and scalable method for deconstructing, storing, intelligently retrieving, and recommending construction cases, providing a theoretical basis for the establishment of a construction case database. It aims to meet the needs of digital project management and intelligent decision-making support in the oil and gas sector, thereby enhancing the efficiency and accuracy of project construction. This work offers a theoretical foundation for the development of an intelligent management platform for ground engineering projects in the oil and gas industry, supporting the sector’s digital transformation and intelligent development.
Open AccessConstruction Method and Practical Application of Oil and Gas Field Surface Engineering Case Database Based on Knowledge Graph
To address the challenge of quickly and efficiently accessing relevant management experience for a wide range of ground engineering construction projects, supporting project management with information technology is crucial. This includes the establishment of a case database and an application platform for intelligent search and recommendations. The article leverages Optical Character Recognition (OCR) technology, knowledge graph technology, and Natural Language Processing (NLP) technology. It explores the mechanisms for classifying construction cases, methods for constructing a case database, structuring case data, intelligently retrieving and matching cases, and intelligent recommendation methods. This research forms a complete, feasible, and scalable method for deconstructing, storing, intelligently retrieving, and recommending construction cases, providing a theoretical basis for the establishment of a construction case database. It aims to meet the needs of digital project management and intelligent decision-making support in the oil and gas sector, thereby enhancing the efficiency and accuracy of project construction. This work offers a theoretical foundation for the development of an intelligent management platform for ground engineering projects in the oil and gas industry, supporting the sector’s digital transformation and intelligent development.
- Open Access
Fast Detection of the Single Point Leakage in Branched Shale Gas Gathering and Transportation Pipeline Network with Condensate Water
The node pressure and flow rate along the shale gas flow process are analyzed according to the characteristics of the shale gas flow pipe network, and the non-leaking and leaking processes of the shale gas flow pipe network are modeled separately. The changes in pressure over time along each pipe segment in the network provide new ideas for identifying leaking pipe sections. This paper uses the logarithmic value of pressure as the basis for judging whether the flow pipe network is leaking or not, according to the process of varying flow parameters resulting in the regularity of leakage. A graph of the change in pressure of the pipe section after the leak compared to the pressure of the non-leaking section of pipe over time can be plotted, accurately identifying the specific section of pipe with the leak. The accuracy of this novel method is verified by the leakage section and statistical data of the shale gas pipeline network in situ used in this paper.
Open AccessFast Detection of the Single Point Leakage in Branched Shale Gas Gathering and Transportation Pipeline Network with Condensate Water
The node pressure and flow rate along the shale gas flow process are analyzed according to the characteristics of the shale gas flow pipe network, and the non-leaking and leaking processes of the shale gas flow pipe network are modeled separately. The changes in pressure over time along each pipe segment in the network provide new ideas for identifying leaking pipe sections. This paper uses the logarithmic value of pressure as the basis for judging whether the flow pipe network is leaking or not, according to the process of varying flow parameters resulting in the regularity of leakage. A graph of the change in pressure of the pipe section after the leak compared to the pressure of the non-leaking section of pipe over time can be plotted, accurately identifying the specific section of pipe with the leak. The accuracy of this novel method is verified by the leakage section and statistical data of the shale gas pipeline network in situ used in this paper.
- Open Access
Electrochemical Investigation of Chloride Ion-Induced Breakdown of Passive Film on P110 Casing Steel Surface in Simulated Pore Solution: Behavior and Critical Value Determination
In the petroleum industry, the casing steel is fixed with a cement sheath to ensure reliable service in demanding conditions characterized by high temperature, high pressure, and exposure to multiple types of media. After the hydration of the cement, a porous material is produced with a highly alkaline solution filling the pores, commonly referred to as the pore solution. The casing will form a protective passive film when in contact with a highly alkaline pore solution. Nevertheless, once the cement sheath cracks, chloride ions in the stratum will pass through the cement sheath to the surface of the casing. When chloride ions accumulate to a certain concentration, the passive film will be destroyed, without exerting a protective influence on the substrate. After chloride ions come into direct contact with the casing, the casing is prone to severe failure due to corrosion perforation. The casing failure can cause a blowout outside the casing and even scrapping of the oil well. Controlling casing corrosion and ensuring casing integrity relies on understanding the critical chloride ion concentration that can cause the degradation of the passive film. Therefore, to assess the electrochemical properties and analyze the damage process of the passive film under varying chloride ion concentrations, several characterization techniques were employed. These included potential–time curves (E-t), polarization curves, electrochemical impedance spectroscopy (EIS), and Mott–Schottky curves. In addition, the composition of the passive film on the surface of the P110 casing steel was qualitatively analyzed using X-ray photoelectron spectroscopy (XPS). To further understand the surface morphology of the P110 casing steel, scanning electron microscopy (SEM) was used.
Open AccessElectrochemical Investigation of Chloride Ion-Induced Breakdown of Passive Film on P110 Casing Steel Surface in Simulated Pore Solution: Behavior and Critical Value Determination
In the petroleum industry, the casing steel is fixed with a cement sheath to ensure reliable service in demanding conditions characterized by high temperature, high pressure, and exposure to multiple types of media. After the hydration of the cement, a porous material is produced with a highly alkaline solution filling the pores, commonly referred to as the pore solution. The casing will form a protective passive film when in contact with a highly alkaline pore solution. Nevertheless, once the cement sheath cracks, chloride ions in the stratum will pass through the cement sheath to the surface of the casing. When chloride ions accumulate to a certain concentration, the passive film will be destroyed, without exerting a protective influence on the substrate. After chloride ions come into direct contact with the casing, the casing is prone to severe failure due to corrosion perforation. The casing failure can cause a blowout outside the casing and even scrapping of the oil well. Controlling casing corrosion and ensuring casing integrity relies on understanding the critical chloride ion concentration that can cause the degradation of the passive film. Therefore, to assess the electrochemical properties and analyze the damage process of the passive film under varying chloride ion concentrations, several characterization techniques were employed. These included potential–time curves (E-t), polarization curves, electrochemical impedance spectroscopy (EIS), and Mott–Schottky curves. In addition, the composition of the passive film on the surface of the P110 casing steel was qualitatively analyzed using X-ray photoelectron spectroscopy (XPS). To further understand the surface morphology of the P110 casing steel, scanning electron microscopy (SEM) was used.
- Open Access
Establishment of Technical Standard Database for Surface Engineering Construction of Oil and Gas Field
In recent years, oil and gas field surface engineering construction projects tend to be large in scale, large in quantity, and short in cycle. The task of surface construction management has increased significantly. In the process of project construction, corresponding standards and specifications are required to provide sufficient technical guidance and support for design, construction, and management personnel to ensure project management and control towards compliance, safety, and quality. However, the oil and gas field engineering standards are numerous and specialized, involving different levels of national standards, enterprise standards, and industry standards, which leads to the inefficiency of the actual use of standards and specifications. To solve them, this paper uses knowledge graph technology, OCR recognition, and natural language processing technology to conduct systematic research on the knowledge classification mechanism, data extraction, database construction mechanism, data structuring, and intelligent retrieval matching of oil-gas field surface engineering construction standards. In this study, the structured identification, storage, and information warehousing of standards are realized, and a highly sharable library of standards and specifications is formed, which realizes the intelligent retrieval and pushing of technical standards for surface engineering construction. This paper creates conditions for the realization of intelligent push and benchmarking management of standards and specifications, providing support for digital transformation and intelligent development of oil–gas fields.
Open AccessEstablishment of Technical Standard Database for Surface Engineering Construction of Oil and Gas Field
In recent years, oil and gas field surface engineering construction projects tend to be large in scale, large in quantity, and short in cycle. The task of surface construction management has increased significantly. In the process of project construction, corresponding standards and specifications are required to provide sufficient technical guidance and support for design, construction, and management personnel to ensure project management and control towards compliance, safety, and quality. However, the oil and gas field engineering standards are numerous and specialized, involving different levels of national standards, enterprise standards, and industry standards, which leads to the inefficiency of the actual use of standards and specifications. To solve them, this paper uses knowledge graph technology, OCR recognition, and natural language processing technology to conduct systematic research on the knowledge classification mechanism, data extraction, database construction mechanism, data structuring, and intelligent retrieval matching of oil-gas field surface engineering construction standards. In this study, the structured identification, storage, and information warehousing of standards are realized, and a highly sharable library of standards and specifications is formed, which realizes the intelligent retrieval and pushing of technical standards for surface engineering construction. This paper creates conditions for the realization of intelligent push and benchmarking management of standards and specifications, providing support for digital transformation and intelligent development of oil–gas fields.