Elena Alfredovna Yatsenko
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Elena Alfredovna Yatsenko has a total of 92 co-authors. Here are the top co-authors by number of shared publications:
- Boris Mikhailovich Goltsman
Platov South-Russian State Polytechnic University (NPI)
22 shared publications - Victoria Alexandrovna Smoliy
Department “General Chemistry and Technology Silicates”, Platov South-Russian State Polytechnic University (NPI), Prosveshcheniya Street 132, Rostov Region, 346428 Novocherkassk, Russia
13 shared publications - Anna Vladimirovna Ryabova
Department “General Chemistry and Technology Silicates”, Platov South-Russian State Polytechnic University (NPI), Prosveshcheniya Street 132, Rostov Region, 346428 Novocherkassk, Russia
7 shared publications - Lyudmila Vasilievna Klimova
Department “General Chemistry and Technology Silicates”, Platov South-Russian State Polytechnic University (NPI), Prosveshcheniya Street 132, Rostov Region, 346428 Novocherkassk, Russia
6 shared publications V. A. Smolii
M. I. Platov Southern Russia State Polytechnic University (NPI)
6 shared publicationsA. S. Kosarev
M. I. Platov South-Russia State Polytechnic University (NPI), Novocherkassk, Russia
5 shared publications
Latest Publications
- 11 August 2026
- Published by BSTU named after V.G. Shukhov in Bulletin of Belgorod State Technological University named after. V. G. Shukhov
- Vol. 11 (11) , 94-102
THE EFFECT OF THE TYPE AND QUANTITY OF HARDENING ADDITIVES ON THE BASIC PROPERTIES OF WEDGING AGENTS SYNTHESIZED ON THE BASIS OF DRILLING MUD
The paper investigates the possibility of processing drilling sludge from the Urengoy field into wedging agents (propants) for hydraulic fracturing technology. The urgency of the work is due to two factors: the high demand for propane in the development of depleted deposits and the need to dispose of large volumes of drilling sludge that have a man-made impact on the environment. Drilling mud from the Urengoy NGKM was used as the main raw material, aluminum oxide, granite and basalt were used as strengthening additives. The synthesis of laboratory samples of propants was carried out at a temperature of 1100 °C. The chemical composition of the raw materials was analyzed by X-ray spectral fluorescence analysis (XRF), while the mineralogical composition was analyzed by X-ray phase analysis. Initial tests showed that the samples without a melt have insufficient strength characteristics due to the high sintering temperatures of the components (more than 1100 °C). After the addition of fluff (NaF, 4% over weight), the strength of the samples increased significantly, reaching 70.47 MPa at a density of 1.83 kg/m3 for the reference composition.
- 11 August 2026
- Published by BSTU named after V.G. Shukhov in Bulletin of Belgorod State Technological University named after. V. G. Shukhov
- Vol. 11 (11) , 94-102
THE EFFECT OF THE TYPE AND QUANTITY OF HARDENING ADDITIVES ON THE BASIC PROPERTIES OF WEDGING AGENTS SYNTHESIZED ON THE BASIS OF DRILLING MUD
The paper investigates the possibility of processing drilling sludge from the Urengoy field into wedging agents (propants) for hydraulic fracturing technology. The urgency of the work is due to two factors: the high demand for propane in the development of depleted deposits and the need to dispose of large volumes of drilling sludge that have a man-made impact on the environment. Drilling mud from the Urengoy NGKM was used as the main raw material, aluminum oxide, granite and basalt were used as strengthening additives. The synthesis of laboratory samples of propants was carried out at a temperature of 1100 °C. The chemical composition of the raw materials was analyzed by X-ray spectral fluorescence analysis (XRF), while the mineralogical composition was analyzed by X-ray phase analysis. Initial tests showed that the samples without a melt have insufficient strength characteristics due to the high sintering temperatures of the components (more than 1100 °C). After the addition of fluff (NaF, 4% over weight), the strength of the samples increased significantly, reaching 70.47 MPa at a density of 1.83 kg/m3 for the reference composition.
- Open Access
- 19 June 2026
- Published by BCREC Publishing Group in Bulletin of Chemical Reaction Engineering & Catalysis
- Vol. 21 (3) , 710-716
Cation-dependent Behavior of Aluminium under Pulsed Electrolysis
For decades, chloride ions Cl⁻have been considered a key factor in the electrochemical behavior of aluminum in chloride electrolytes, including depassivation, pitting corrosion, and anodic dissolution. However, the influence of electrolyte cations has been considered secondary or ignored in most classical studies. In this study, we investigated the influence of electrolyte cations (MgCl2, CaCl2, SrCl2, BaCl2) on the electrochemical behavior of aluminum under the influence of an alternating symmetrical pulsed current with a density of 1 A.cm-2. The study found that in the presence of Ba2+ and Sr2+, aluminum is oxidized to form dispersed two-phase products AlOOH and Al(OH)3, with an average particle size of 1.9 and 2.2 nm for the AlOOH phase and 20.4 and 13.9 nm for the Al(OH)3 phase. In Mg2+ and Ca2+ chlorides, passivating films of Mg(OH)2 or Ca(OH)2 are formed, as well as layered double hydroxides – Mg6Al2(OH)16Cl2∙4H2O (Mg-Al LDH) or Ca2Al(OH)6Cl∙2H2O (Ca-Al LDH), respectively, which inhibit aluminum corrosion under pulse electrolysis conditions, even in the presence of activating Cl- ions. Copyright © 2026 by Authors, Published by BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).
- 19 June 2026
- Published by BCREC Publishing Group in Bulletin of Chemical Reaction Engineering & Catalysis
- Vol. 21 (3) , 710-716
Open AccessCation-dependent Behavior of Aluminium under Pulsed Electrolysis
For decades, chloride ions Cl⁻have been considered a key factor in the electrochemical behavior of aluminum in chloride electrolytes, including depassivation, pitting corrosion, and anodic dissolution. However, the influence of electrolyte cations has been considered secondary or ignored in most classical studies. In this study, we investigated the influence of electrolyte cations (MgCl2, CaCl2, SrCl2, BaCl2) on the electrochemical behavior of aluminum under the influence of an alternating symmetrical pulsed current with a density of 1 A.cm-2. The study found that in the presence of Ba2+ and Sr2+, aluminum is oxidized to form dispersed two-phase products AlOOH and Al(OH)3, with an average particle size of 1.9 and 2.2 nm for the AlOOH phase and 20.4 and 13.9 nm for the Al(OH)3 phase. In Mg2+ and Ca2+ chlorides, passivating films of Mg(OH)2 or Ca(OH)2 are formed, as well as layered double hydroxides – Mg6Al2(OH)16Cl2∙4H2O (Mg-Al LDH) or Ca2Al(OH)6Cl∙2H2O (Ca-Al LDH), respectively, which inhibit aluminum corrosion under pulse electrolysis conditions, even in the presence of activating Cl- ions. Copyright © 2026 by Authors, Published by BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).
- 30 December 2025
- Published by Ore and Metals Publishing House in Eurasian Mining
- No. 2,p. 74-77
Oil and gas well drilling waste disposal in the Russian Arctic Zone: Review
The oil and gas industry is a key economic sector in Russia. Considerable oil reserves of the country occur in its Arctic Zone. Within the internationally defined borders of the Russian Arctic Zone and Arctic Shelf, 282 oil fields are discovered, including 26 oil fields on the shelf and in the coastal transition zone. Major proven reserves occur in the Yamalo-Nenets and Nenets Autonomous Areas within the Arctic Zone of Russia. Well drilling produces much drilling mud, drill fluID and drilling wastewater. Drilling mud represents the bulk of the industry waste which pollutes the environment. The ecological safety of the Russian Arctic is a top-priority problem. As a result of drilling mud impact, the natural environment and underground water alter greatly. This article analyzes methods and means of drilling waste treatment and conversion to different materials. The scope of the analysis encompasses thermal treatment, bioconversion, the use of drilling mud as a natural fine aggregate to replace limestone and clay in the cement industry, as well as manufacturing of constructional materials and propping agents. It seems to be apromising trend to create mobile facilities in the Russian Arctic for the in-situ production of constructional materials from drilling waste.The study was supported by the Ministry of Science and Higher Education of the Russian Federation under the state contract within the topic “Technology Fundamentals of Recycling of Oil Industry Waste in the Arctic Zone of Russia with Production of Effective Constructional Materials and Propping Agents, FENN-2025-0001, Head—E. A. Yatsenko.
- 30 December 2025
- Published by Ore and Metals Publishing House in Eurasian Mining
- No. 2,p. 74-77
Oil and gas well drilling waste disposal in the Russian Arctic Zone: Review
The oil and gas industry is a key economic sector in Russia. Considerable oil reserves of the country occur in its Arctic Zone. Within the internationally defined borders of the Russian Arctic Zone and Arctic Shelf, 282 oil fields are discovered, including 26 oil fields on the shelf and in the coastal transition zone. Major proven reserves occur in the Yamalo-Nenets and Nenets Autonomous Areas within the Arctic Zone of Russia. Well drilling produces much drilling mud, drill fluID and drilling wastewater. Drilling mud represents the bulk of the industry waste which pollutes the environment. The ecological safety of the Russian Arctic is a top-priority problem. As a result of drilling mud impact, the natural environment and underground water alter greatly. This article analyzes methods and means of drilling waste treatment and conversion to different materials. The scope of the analysis encompasses thermal treatment, bioconversion, the use of drilling mud as a natural fine aggregate to replace limestone and clay in the cement industry, as well as manufacturing of constructional materials and propping agents. It seems to be apromising trend to create mobile facilities in the Russian Arctic for the in-situ production of constructional materials from drilling waste.The study was supported by the Ministry of Science and Higher Education of the Russian Federation under the state contract within the topic “Technology Fundamentals of Recycling of Oil Industry Waste in the Arctic Zone of Russia with Production of Effective Constructional Materials and Propping Agents, FENN-2025-0001, Head—E. A. Yatsenko.
- Open Access
Study of Structure and Phase Formation During Thermal Treatment of Geopolymer Compositions Based on Mineral Waste
A comprehensive study was conducted to investigate the influence of mineral waste on the thermal stability of foamed geopolymer materials. The study’s objects were steelmaking slag (SS) from the Taganrog Metallurgical Plant, drilling sludge (DS) from the Sutorminskoye oil field, and an ash and slag mixture (ASM) from the Novocherkasskaya SDPP. The utilisation of drilling sludge as an additive in the production of geopolymers has been proposed for the first time. The study involved the development of alkaline activators based on solutions of sodium and potassium silicates and their hydroxides. The samples were synthesised with varying proportions of steelmaking slag and drilling sludge, and physicochemical, mechanical and high-temperature studies were conducted to ascertain the optimal composition. X-ray phase analysis of the synthesised samples was conducted. An investigation was conducted into alterations in the phase composition of the material as a consequence of heat treatment. Proposals were hereby made for the mechanisms of the formation of new phases. The study identified an alkaline activator based on a solution of silicate and sodium hydroxide, with the introduction of 10% steelmaking slag into the component mixture, as the most effective mixture. The resultant geopolymers exhibited a density of 311 kg/m3 and an ultimate compressive strength of 1.54 MPa.
Open AccessStudy of Structure and Phase Formation During Thermal Treatment of Geopolymer Compositions Based on Mineral Waste
A comprehensive study was conducted to investigate the influence of mineral waste on the thermal stability of foamed geopolymer materials. The study’s objects were steelmaking slag (SS) from the Taganrog Metallurgical Plant, drilling sludge (DS) from the Sutorminskoye oil field, and an ash and slag mixture (ASM) from the Novocherkasskaya SDPP. The utilisation of drilling sludge as an additive in the production of geopolymers has been proposed for the first time. The study involved the development of alkaline activators based on solutions of sodium and potassium silicates and their hydroxides. The samples were synthesised with varying proportions of steelmaking slag and drilling sludge, and physicochemical, mechanical and high-temperature studies were conducted to ascertain the optimal composition. X-ray phase analysis of the synthesised samples was conducted. An investigation was conducted into alterations in the phase composition of the material as a consequence of heat treatment. Proposals were hereby made for the mechanisms of the formation of new phases. The study identified an alkaline activator based on a solution of silicate and sodium hydroxide, with the introduction of 10% steelmaking slag into the component mixture, as the most effective mixture. The resultant geopolymers exhibited a density of 311 kg/m3 and an ultimate compressive strength of 1.54 MPa.
- Open Access
- 29 August 2025
- Published by Moscow State University of Civil Engineering in Vestnik MGSU
- Vol. 20 (8) , 1199-1210
Fluoride-borate mixtures as a foaming intensifier for TPP slag wastes
Фторидно-боратные смеси как интенсификатор вспенивания шлаковых отходов тепловых электростанций
- 29 August 2025
- Published by Moscow State University of Civil Engineering in Vestnik MGSU
- Vol. 20 (8) , 1199-1210
Open AccessFluoride-borate mixtures as a foaming intensifier for TPP slag wastes
Фторидно-боратные смеси как интенсификатор вспенивания шлаковых отходов тепловых электростанций
- 30 May 2025
- Published by Ore and Metals Publishing House in Chernye Metally
- No. 5,p. 73-77
Study of the evolution of surface morphology and elemental composition of coatings based on cobalt-manganese spinel of current collectors of solid oxide fuel cells in an oxidizing environment
The paper presents data on the performance of physical and chemical properties of Co-Mn spinel-based coatings during area-specific resistance measurements in a model solid oxide fuel cell. Synthesis of coatings was carried out using the method of non-stationary electrolysis. When comparing microphotographs of coatings before and after high-temperature oxidation, it can be seen that crystallisation of coatings and enlargement of their constituent fragments during oxidation occur. Thus according to the data of X-ray microanalysis it is established that in the process of oxidation there is an increase in concentration of chromium, manganese and iron that can be connected with diffusion of these elements from steel on a surface of a coating. From the XRD data, it can be seen that cobalt and manganese are distributed evenly over the coating surface, while chromium, which is part of the substrate, is concentrated in the cracks of the coating. From the X-ray diffraction data, it can be seen that the coating is in an X-ray amorphous state. It should be noted, however, that oxidation in air for 1000 h at 850 °C results in the coating becoming more crystallized. Thus, in addition to the Co-Mn spinel peak, Fe-Cr, Cr2O3 and Fe3O4 phases are observed. The study of the change in the weight gain of the coated and pure steel samples in the cyclic regime of heating-holding-cooling showed the following. Oxidation of uncoated Crofer 22 APU steel grows from the first hours of oxidation according to a parabolic law: the rate is determined by the thermodiffusion of chromium through the oxide growing on the steel surface to the surface. The coated samples show a decrease in mass in the first 10 hours, and then the weight gain also grows according to the parabolic law. The values of the calculated rate constants show the effectiveness of the developed coatings.The study was supported by a grant from the Russian Science Foundation No. 24-23-00113, https://rscf.ru/project/24-23-00113/.
- 30 May 2025
- Published by Ore and Metals Publishing House in Chernye Metally
- No. 5,p. 73-77
Study of the evolution of surface morphology and elemental composition of coatings based on cobalt-manganese spinel of current collectors of solid oxide fuel cells in an oxidizing environment
The paper presents data on the performance of physical and chemical properties of Co-Mn spinel-based coatings during area-specific resistance measurements in a model solid oxide fuel cell. Synthesis of coatings was carried out using the method of non-stationary electrolysis. When comparing microphotographs of coatings before and after high-temperature oxidation, it can be seen that crystallisation of coatings and enlargement of their constituent fragments during oxidation occur. Thus according to the data of X-ray microanalysis it is established that in the process of oxidation there is an increase in concentration of chromium, manganese and iron that can be connected with diffusion of these elements from steel on a surface of a coating. From the XRD data, it can be seen that cobalt and manganese are distributed evenly over the coating surface, while chromium, which is part of the substrate, is concentrated in the cracks of the coating. From the X-ray diffraction data, it can be seen that the coating is in an X-ray amorphous state. It should be noted, however, that oxidation in air for 1000 h at 850 °C results in the coating becoming more crystallized. Thus, in addition to the Co-Mn spinel peak, Fe-Cr, Cr2O3 and Fe3O4 phases are observed. The study of the change in the weight gain of the coated and pure steel samples in the cyclic regime of heating-holding-cooling showed the following. Oxidation of uncoated Crofer 22 APU steel grows from the first hours of oxidation according to a parabolic law: the rate is determined by the thermodiffusion of chromium through the oxide growing on the steel surface to the surface. The coated samples show a decrease in mass in the first 10 hours, and then the weight gain also grows according to the parabolic law. The values of the calculated rate constants show the effectiveness of the developed coatings.The study was supported by a grant from the Russian Science Foundation No. 24-23-00113, https://rscf.ru/project/24-23-00113/.
- 30 September 2024
- Published by Springer Nature in Glass and Ceramics
- Vol. 81 (5-6) , 248-251
Synthesis of Effective Silicate Materials Based on Waste from the Energy Industry
- 30 September 2024
- Published by Springer Nature in Glass and Ceramics
- Vol. 81 (5-6) , 248-251
Synthesis of Effective Silicate Materials Based on Waste from the Energy Industry
- 1 September 2024
- Published by South Russian State Polytechnic University (NPI) in University News. North-Caucasian Region. Technical Sciences Series
- No. 3
Influence of curing temperature on technological properties and structure of geopolymers based on coal energy waste
Научно-образовательный и прикладной журнал ИЗВЕСТИЯ ВЫСШИХ УЧЕБНЫХ ЗАВЕДЕНИЙ. СЕВЕРО-КАВКАЗСКИЙ РЕГИОН. Технаука.
- 1 September 2024
- Published by South Russian State Polytechnic University (NPI) in University News. North-Caucasian Region. Technical Sciences Series
- No. 3
Influence of curing temperature on technological properties and structure of geopolymers based on coal energy waste
Научно-образовательный и прикладной журнал ИЗВЕСТИЯ ВЫСШИХ УЧЕБНЫХ ЗАВЕДЕНИЙ. СЕВЕРО-КАВКАЗСКИЙ РЕГИОН. Технаука.
- 22 February 2024
- Published by Elsevier in Ceramics International
- Vol. 50 (10) , 17756-17763
Relational model of compositions of enamel coatings and sintering temperature based on back propagation neural network algorithm
- 22 February 2024
- Published by Elsevier in Ceramics International
- Vol. 50 (10) , 17756-17763
Relational model of compositions of enamel coatings and sintering temperature based on back propagation neural network algorithm