Victoria Alexandrovna Smoliy
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Victoria Alexandrovna Smoliy has a total of 41 co-authors. Here are the top co-authors by number of shared publications:
- Boris Mikhailovich Goltsman
Platov South-Russian State Polytechnic University (NPI)
13 shared publications - Elena Alfredovna Yatsenko
Platov South-Russian State Polytechnic University
13 shared publications A. S. Kosarev
M. I. Platov South-Russia State Polytechnic University (NPI), Novocherkassk, Russia
8 shared publicationsE. A. Yatsenko
M. I. Pavlov South-Russia State Polytechnic University (NPI), Novocherkassk, Russia
8 shared publications- Anna Vladimirovna Ryabova
Department “General Chemistry and Technology Silicates”, Platov South-Russian State Polytechnic University (NPI), Prosveshcheniya Street 132, Rostov Region, 346428 Novocherkassk, Russia
5 shared publications - Lyudmila Vasilievna Klimova
Department “General Chemistry and Technology Silicates”, Platov South-Russian State Polytechnic University (NPI), Prosveshcheniya Street 132, Rostov Region, 346428 Novocherkassk, Russia
5 shared publications
Latest Publications
- 5 February 2026
- Published by Elsevier in Ceramics International
- Vol. 52 (9) , 13059-13069
Cu-, Ni- and Fe-doped protective cobalt-manganese spinel coatings for solid oxide fuel cell interconnects
- 5 February 2026
- Published by Elsevier in Ceramics International
- Vol. 52 (9) , 13059-13069
Cu-, Ni- and Fe-doped protective cobalt-manganese spinel coatings for solid oxide fuel cell interconnects
- Open Access
- 29 August 2025
- Published by Moscow State University of Civil Engineering in Vestnik MGSU
- Vol. 20 (8) , 1199-1210
Fluoride-borate mixtures as a foaming intensifier for TPP slag wastes
Фторидно-боратные смеси как интенсификатор вспенивания шлаковых отходов тепловых электростанций
- 29 August 2025
- Published by Moscow State University of Civil Engineering in Vestnik MGSU
- Vol. 20 (8) , 1199-1210
Open AccessFluoride-borate mixtures as a foaming intensifier for TPP slag wastes
Фторидно-боратные смеси как интенсификатор вспенивания шлаковых отходов тепловых электростанций
- Open Access
- 28 April 2025
- Published by Southern Federal University in HUMANITIES OF THE SOUTH OF RUSSIA
- Vol. 14 (2) , 103-115
FORMS AND PROBLEMS OF REPRODUCTION OF RESEARCH AND PEDAGOGICAL PERSONNEL OF THE UNIVERSITY
Objective of the study is to study the state and problems of the system of reproduction of scientific and pedagogical personnel in a modern Russian university. The methodological basis of the study is represented by the philosophical, sociological and general scientific concepts of leading scientists of philosophy and sociology, reference books and materials from the official websites of the Government of the Russian Federation, the Ministry of Science and Higher Education of the Russian Federation, the Ministry of General and Professional Education of the Rostov Region, sociological research data to study the process of reproduction of highly qualified scientific and pedagogical personnel in the university. The results of the study. One of the priority results of the study is the analysis of the problems of reproduction of scientific and pedagogical personnel in the university from the point of view of polyparadigm through theoretical concepts of education from the sociological perspective of scientific works of leading scientists. Prospects of the study is an in-depth analysis of the forms and problems of reproduction of scientific and pedagogical personnel of a university, as well as their role in the development of society, which allows us to identify the necessary directions in solving the problem. The problems of reproduction of scientific and pedagogical personnel in universities are currently insufficiently studied and are interdisciplinary in nature, and therefore the management of these processes must be approached comprehensively, from the point of view of not only education, but also sociology, philosophy, pedagogy, history, economics, etc. Целью исследования является изучение состояния и проблем системы воспроизводства научно-педагогических кадров современного российского вуза. Методологическую базу исследования представляют философские, социологические и общенаучные концепции ведущих ученых в области философии и социологии, справочники и материалы официальных сайтов Правительства РФ, Министерства науки и высшего образования Российской Федерации, Министерства общего и профессионального образования Ростовской области, данные социологических исследований для изучения процесса воспроизводства высококвалифицированных научно-педагогических кадров вуза. Результаты исследования. Одним из приоритетных результатов проведенного исследования является анализ проблем воспроизводства научно-педагогических кадров вуза с точки зрения полипарадигмальности через теоретические концепции образования в социологическом ракурсе научных трудов ведущих ученых. Перспективу исследования составляет углубленный анализ проблематики и форм воспроизводства научно-педагогических кадров вуза, а также их роли в развитии общества, что позволяет обозначить необходимые направления в решении проблемы. Проблемы воспроизводства научно-педагогических кадров в вузах недостаточно в настоящее время изучены и носят междисциплинарный характер, в связи с чем к управлению данными процессами необходимо подходить комплексно, с точки зрения не только образования, но и социологии, философии, педагогики, истории, экономики и т. д.
- 28 April 2025
- Published by Southern Federal University in HUMANITIES OF THE SOUTH OF RUSSIA
- Vol. 14 (2) , 103-115
Open AccessFORMS AND PROBLEMS OF REPRODUCTION OF RESEARCH AND PEDAGOGICAL PERSONNEL OF THE UNIVERSITY
Objective of the study is to study the state and problems of the system of reproduction of scientific and pedagogical personnel in a modern Russian university. The methodological basis of the study is represented by the philosophical, sociological and general scientific concepts of leading scientists of philosophy and sociology, reference books and materials from the official websites of the Government of the Russian Federation, the Ministry of Science and Higher Education of the Russian Federation, the Ministry of General and Professional Education of the Rostov Region, sociological research data to study the process of reproduction of highly qualified scientific and pedagogical personnel in the university. The results of the study. One of the priority results of the study is the analysis of the problems of reproduction of scientific and pedagogical personnel in the university from the point of view of polyparadigm through theoretical concepts of education from the sociological perspective of scientific works of leading scientists. Prospects of the study is an in-depth analysis of the forms and problems of reproduction of scientific and pedagogical personnel of a university, as well as their role in the development of society, which allows us to identify the necessary directions in solving the problem. The problems of reproduction of scientific and pedagogical personnel in universities are currently insufficiently studied and are interdisciplinary in nature, and therefore the management of these processes must be approached comprehensively, from the point of view of not only education, but also sociology, philosophy, pedagogy, history, economics, etc. Целью исследования является изучение состояния и проблем системы воспроизводства научно-педагогических кадров современного российского вуза. Методологическую базу исследования представляют философские, социологические и общенаучные концепции ведущих ученых в области философии и социологии, справочники и материалы официальных сайтов Правительства РФ, Министерства науки и высшего образования Российской Федерации, Министерства общего и профессионального образования Ростовской области, данные социологических исследований для изучения процесса воспроизводства высококвалифицированных научно-педагогических кадров вуза. Результаты исследования. Одним из приоритетных результатов проведенного исследования является анализ проблем воспроизводства научно-педагогических кадров вуза с точки зрения полипарадигмальности через теоретические концепции образования в социологическом ракурсе научных трудов ведущих ученых. Перспективу исследования составляет углубленный анализ проблематики и форм воспроизводства научно-педагогических кадров вуза, а также их роли в развитии общества, что позволяет обозначить необходимые направления в решении проблемы. Проблемы воспроизводства научно-педагогических кадров в вузах недостаточно в настоящее время изучены и носят междисциплинарный характер, в связи с чем к управлению данными процессами необходимо подходить комплексно, с точки зрения не только образования, но и социологии, философии, педагогики, истории, экономики и т. д.
- Open Access
Study on the Curing and Foaming of Surfactant-Modified Geopolymer Gels Based on Ash and Slag Waste from Coal Combustion
This study explores the influence of temperature–time conditions, surfactants, and varied waste compositions on the curing of geopolymer gels, a foam formation with the properties of porous geopolymers. Findings reveal that a 6 h curing period leads to a density of 435 kg/m3 and strength of 0.66 MPa, with notable improvements at 12 h. Comparing 12 to 24 h curing, differences in characteristics remain within 5%, highlighting the 12 h period as more energy-efficient. Sodium stearate-based samples exhibit excellent properties, significantly boosting strength while maintaining overall properties. Microwave curing achieves the lowest density (291 kg/m3) and closely parallels properties of samples cured conventionally for 12 h. However, it leads to complete destruction in sodium stearate-modified gels due to the Dumas reaction, making it unsuitable above 200 °C. Optimal properties emerge from compositions using sodium stearate and oven curing, achieving densities of 334 kg/m3 and strengths of 1.08 MPa (Severodvinsk CHPP-1) and 373 kg/m3 and 1.17 MPa (Novocherkassk SDPP). Although microwave curing allows for high energy efficiency, its high temperature demands necessitate careful material selection. This study offers insight into enhancing geopolymer properties while emphasizing the importance of tailored curing methods for sustainable material development.
Open AccessStudy on the Curing and Foaming of Surfactant-Modified Geopolymer Gels Based on Ash and Slag Waste from Coal Combustion
This study explores the influence of temperature–time conditions, surfactants, and varied waste compositions on the curing of geopolymer gels, a foam formation with the properties of porous geopolymers. Findings reveal that a 6 h curing period leads to a density of 435 kg/m3 and strength of 0.66 MPa, with notable improvements at 12 h. Comparing 12 to 24 h curing, differences in characteristics remain within 5%, highlighting the 12 h period as more energy-efficient. Sodium stearate-based samples exhibit excellent properties, significantly boosting strength while maintaining overall properties. Microwave curing achieves the lowest density (291 kg/m3) and closely parallels properties of samples cured conventionally for 12 h. However, it leads to complete destruction in sodium stearate-modified gels due to the Dumas reaction, making it unsuitable above 200 °C. Optimal properties emerge from compositions using sodium stearate and oven curing, achieving densities of 334 kg/m3 and strengths of 1.08 MPa (Severodvinsk CHPP-1) and 373 kg/m3 and 1.17 MPa (Novocherkassk SDPP). Although microwave curing allows for high energy efficiency, its high temperature demands necessitate careful material selection. This study offers insight into enhancing geopolymer properties while emphasizing the importance of tailored curing methods for sustainable material development.
- Open Access
- 30 November 2023
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 24 (23) , 17023
Mechanism of Cs Immobilization within a Sodalite Framework: The Role of Alkaline Cations and the Si/Al Ratio
Conditioning of radioactive waste generated from the operation of medical institutions, nuclear cycle facilities, and nuclear facilities is important for the safety of the environment. One of the most hazardous radionuclides is radioactive cesium. There is a need for more effective solutions to contain radionuclides, especially cesium (Cs+). Geopolymers are promising inorganic materials that can provide a large active surface area with adjustable porosity and binding capacity. The existence of nanosized zeolite-like structures in aluminosilicate gels was shown earlier. These structures are candidates for immobilizing radioactive cesium (Cs+). However, the mechanisms of their interactions with the aluminosilicate framework related to radionuclide immobilization have not been well studied. In this work, the influence of alkaline cations (Na+ or K+) and the aluminosilicate framework structure on the binding capacity and mechanism of interaction of geopolymers with Cs+ is explored in the example of a sodalite framework. The local structure of the water molecules and alkaline ions in the equilibrium state and its behavior when the Si/Al ratio was changed were studied by DFT.
- 30 November 2023
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 24 (23) , 17023
Open AccessMechanism of Cs Immobilization within a Sodalite Framework: The Role of Alkaline Cations and the Si/Al Ratio
Conditioning of radioactive waste generated from the operation of medical institutions, nuclear cycle facilities, and nuclear facilities is important for the safety of the environment. One of the most hazardous radionuclides is radioactive cesium. There is a need for more effective solutions to contain radionuclides, especially cesium (Cs+). Geopolymers are promising inorganic materials that can provide a large active surface area with adjustable porosity and binding capacity. The existence of nanosized zeolite-like structures in aluminosilicate gels was shown earlier. These structures are candidates for immobilizing radioactive cesium (Cs+). However, the mechanisms of their interactions with the aluminosilicate framework related to radionuclide immobilization have not been well studied. In this work, the influence of alkaline cations (Na+ or K+) and the aluminosilicate framework structure on the binding capacity and mechanism of interaction of geopolymers with Cs+ is explored in the example of a sodalite framework. The local structure of the water molecules and alkaline ions in the equilibrium state and its behavior when the Si/Al ratio was changed were studied by DFT.
- Open Access
- 24 November 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (23) , 16296
Recycling of Coal Combustion Waste through Production of Foamed Geopolymers with Improved Strength
Recycling of industrial waste into useful materials is a crucial aim for achieving sustainable development in materials science. The use of production waste in the manufacture of construction materials contributes to improving the environmental situation and reducing the cost of the final product. This article examines the utilization of coal combustion waste recycled into foamed geopolymers and ways of enhancing their strength properties through the introduction of strengthening additives. Eight compositions of foamed geopolymers containing different strengthening additives were synthesized. Inorganic substances (CaO, MgO, ZnO, TiO2, Al2O3, SiC, and ZrO2) were chosen as strengthening additives that were introduced in an amount of 3% (over 100%). The physical and mechanical properties (density, compressive strength, porosity, and pore size distribution) of the obtained samples were studied and compared. Magnesium oxide MgO and aluminum oxide Al2O3 were chosen as the best strengthening additives. Magnesium oxide allows geopolymer materials with the lowest density to be obtained. Aluminum oxide can significantly increase the strength of geopolymers. The phase composition of the samples contains new crystalline phases in the form of α-alumina and periclase. The porous structure is homogeneous and meets the requirements for foamed thermal insulation materials. The strengthening effect of the chosen additives was verified using geopolymers based on different waste from Novocherkassk SDPP.
- 24 November 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (23) , 16296
Open AccessRecycling of Coal Combustion Waste through Production of Foamed Geopolymers with Improved Strength
Recycling of industrial waste into useful materials is a crucial aim for achieving sustainable development in materials science. The use of production waste in the manufacture of construction materials contributes to improving the environmental situation and reducing the cost of the final product. This article examines the utilization of coal combustion waste recycled into foamed geopolymers and ways of enhancing their strength properties through the introduction of strengthening additives. Eight compositions of foamed geopolymers containing different strengthening additives were synthesized. Inorganic substances (CaO, MgO, ZnO, TiO2, Al2O3, SiC, and ZrO2) were chosen as strengthening additives that were introduced in an amount of 3% (over 100%). The physical and mechanical properties (density, compressive strength, porosity, and pore size distribution) of the obtained samples were studied and compared. Magnesium oxide MgO and aluminum oxide Al2O3 were chosen as the best strengthening additives. Magnesium oxide allows geopolymer materials with the lowest density to be obtained. Aluminum oxide can significantly increase the strength of geopolymers. The phase composition of the samples contains new crystalline phases in the form of α-alumina and periclase. The porous structure is homogeneous and meets the requirements for foamed thermal insulation materials. The strengthening effect of the chosen additives was verified using geopolymers based on different waste from Novocherkassk SDPP.
- Open Access
Recycling Ash and Slag Waste from Thermal Power Plants to Produce Foamed Geopolymers
Ash and slag waste (ASW) from coal combustion creates significant environmental and economic challenges. A promising method of ASW recycling is alkali activation with geopolymer material formation. This study investigates the influence of activating solution components (sodium hydroxide and sodium silicate) on the formation of porous geopolymers using ASW of different origins. The sodium hydroxide content of 0–4 wt.% and the sodium silicate content of 17–25 wt.% were studied. An increase in sodium hydroxide resulted in decreased density, but it adversely affected the strength. An increase in sodium silicate led to a compromised porous structure with relatively high density and compressive strength. An optimal composition, S19N3, comprising 3 wt.% of sodium hydroxide and 19 wt.% of sodium silicate obtained porous geopolymers with uniformly distributed 1.4–2 mm pores and a corresponding density of 335 kg/m3, a compressive strength of 0.55 MPa, a porosity value of 85.6%, and a thermal conductivity value of 0.075 W/(m·K). A mechanism for porous geopolymer formation was developed, including the interaction of alkaline components with ASW and a foaming agent, foaming, curing, and densification. The mechanism was examined using ASW from the Severodvinsk CHPP-1. This study allows for the optimization of geopolymer mixtures with various waste sources and the utilization of waste materials in the construction industry.
Open AccessRecycling Ash and Slag Waste from Thermal Power Plants to Produce Foamed Geopolymers
Ash and slag waste (ASW) from coal combustion creates significant environmental and economic challenges. A promising method of ASW recycling is alkali activation with geopolymer material formation. This study investigates the influence of activating solution components (sodium hydroxide and sodium silicate) on the formation of porous geopolymers using ASW of different origins. The sodium hydroxide content of 0–4 wt.% and the sodium silicate content of 17–25 wt.% were studied. An increase in sodium hydroxide resulted in decreased density, but it adversely affected the strength. An increase in sodium silicate led to a compromised porous structure with relatively high density and compressive strength. An optimal composition, S19N3, comprising 3 wt.% of sodium hydroxide and 19 wt.% of sodium silicate obtained porous geopolymers with uniformly distributed 1.4–2 mm pores and a corresponding density of 335 kg/m3, a compressive strength of 0.55 MPa, a porosity value of 85.6%, and a thermal conductivity value of 0.075 W/(m·K). A mechanism for porous geopolymer formation was developed, including the interaction of alkaline components with ASW and a foaming agent, foaming, curing, and densification. The mechanism was examined using ASW from the Severodvinsk CHPP-1. This study allows for the optimization of geopolymer mixtures with various waste sources and the utilization of waste materials in the construction industry.
- Open Access
Influence of Various Coal Energy Wastes and Foaming Agents on Foamed Geopolymer Materials’ Synthesis
The regularities of obtaining foamed alkali-activated geopolymer materials based on different wastes of coal power engineering (fly ash, fuel (boiler) slag, ash, and slag mixture) were considered. The phase composition of the studied waste showed the presence of a significant amount of the amorphous phase, as well as a crystalline phase. mostly in the form of high quartz. The microstructure of studied the waste showed that the fly ash consisted of monodisperse hollow aluminosilicate microspheres, the fuel slag was represented by polydisperse irregular particles, and the ash and slag mixture included both of these materials in different ratios. Blowing agents such as aluminum powder, hydrogen peroxide, and sodium hypochlorite were chosen to achieve the porous structure of the geopolymer materials. The calculations of the geopolymer precursor compositions were carried out. Samples were synthesized, and their physical and mechanical properties, such as density, strength, porosity, and thermal conductivity, were analyzed. The micro- and macrostructure of the samples, as well as the pore distribution of the obtained geopolymers were studied. Conclusions were made on the choice of the most-optimal foaming agent and the optimal coal combustion waste suitable for the synthesis of the geopolymer materials.
Open AccessInfluence of Various Coal Energy Wastes and Foaming Agents on Foamed Geopolymer Materials’ Synthesis
The regularities of obtaining foamed alkali-activated geopolymer materials based on different wastes of coal power engineering (fly ash, fuel (boiler) slag, ash, and slag mixture) were considered. The phase composition of the studied waste showed the presence of a significant amount of the amorphous phase, as well as a crystalline phase. mostly in the form of high quartz. The microstructure of studied the waste showed that the fly ash consisted of monodisperse hollow aluminosilicate microspheres, the fuel slag was represented by polydisperse irregular particles, and the ash and slag mixture included both of these materials in different ratios. Blowing agents such as aluminum powder, hydrogen peroxide, and sodium hypochlorite were chosen to achieve the porous structure of the geopolymer materials. The calculations of the geopolymer precursor compositions were carried out. Samples were synthesized, and their physical and mechanical properties, such as density, strength, porosity, and thermal conductivity, were analyzed. The micro- and macrostructure of the samples, as well as the pore distribution of the obtained geopolymers were studied. Conclusions were made on the choice of the most-optimal foaming agent and the optimal coal combustion waste suitable for the synthesis of the geopolymer materials.
- 11 November 2022
- Published by Springer Nature in Glass and Ceramics
- Vol. 79 (7-8) , 336-339
Proppants Based on Drill Cuttings
- 11 November 2022
- Published by Springer Nature in Glass and Ceramics
- Vol. 79 (7-8) , 336-339
Proppants Based on Drill Cuttings
- Open Access
Improving the Properties of Porous Geopolymers Based on TPP Ash and Slag Waste by Adjusting Their Chemical Composition
The possibility of improving the properties of porous geopolymer materials based on ash and slag waste from thermal power plants by adjusting their chemical composition is considered. An X-ray phase analysis of ash and slag wastes was carried out, the geopolymers’ precursor compositions were calculated, and additives to correct their chemical composition were selected. The samples were synthesized and their physical and mechanical properties (density, porosity, compressive strength, thermal conductivity) were analyzed. The micro- and macro-structure of the samples and the pore distribution of the obtained geopolymers were studied and pore-distribution histograms were obtained. The influence of Si:Al ratio on structural changes was described. The geopolymers’ phase composition was studied, consisting of an amorphous phase and high quartz and mullite. A conclusion about the applicability of this method for obtaining high-quality porous geopolymers was made.
Open AccessImproving the Properties of Porous Geopolymers Based on TPP Ash and Slag Waste by Adjusting Their Chemical Composition
The possibility of improving the properties of porous geopolymer materials based on ash and slag waste from thermal power plants by adjusting their chemical composition is considered. An X-ray phase analysis of ash and slag wastes was carried out, the geopolymers’ precursor compositions were calculated, and additives to correct their chemical composition were selected. The samples were synthesized and their physical and mechanical properties (density, porosity, compressive strength, thermal conductivity) were analyzed. The micro- and macro-structure of the samples and the pore distribution of the obtained geopolymers were studied and pore-distribution histograms were obtained. The influence of Si:Al ratio on structural changes was described. The geopolymers’ phase composition was studied, consisting of an amorphous phase and high quartz and mullite. A conclusion about the applicability of this method for obtaining high-quality porous geopolymers was made.