Siyuan He
Research Subjects
Siyuan He has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Jun Li
State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University
4 shared publications - Mingyi Wu
Sichuan Particles Energy and Technology Co., Ltd., Chengdu, Sichuan, China
4 shared publications Kewen Tang
State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University
1 shared publication- Pingli Liu
Southwest Petroleum University
1 shared publication Sijie Pu
Sichuan Particles Energy Technology Co., Ltd
1 shared publication- Xinqian Lu
Petroleum Systems Engineering, Faculty of Engineering and Applied Science, University of Regina, Regina, SK S4S 0A2, Canada
1 shared publication
Latest Publications
- 20 April 2026
- Published by Society of Petroleum Engineers (SPE) in SPE Journal
- Vol. 31 (06) , 4089-4105
Visual Laboratory Tests Effect of Operational Parameters on Dandelion-Based Bionic Proppant Transport in a Hydraulic Fracture with Rough Surfaces
Summary: The higher packing height and efficient placement and transportation of proppants in deep shale fractures determine the later oil and gas production. However, as the depth of the shale formation increases and the temperature rises, the viscosity of the fracturing fluid decreases significantly. Achieving efficient transport of low-viscosity liquids carrying proppants has long been an urgent issue that needs to be addressed in developing deep shale gas reservoirs. Based on previous research, it has been proved that a dandelion-structured proppant can solve the above problems. However, the key operational factors influencing dandelion-based bionic proppant placement remain unclear. For this study, we built a rough surface of the shale vertical fracture model and conducted laboratory tests on the dandelion-based bionic proppant transportation and distribution under different key factors. The experimental results show for the first time that compared with the piling-up mechanism of conventional proppants (spherical shaped proppant), the dandelion-based bionic proppant forms an upper and lower packing shape. In addition, the lower-viscosity fluid with a higher injection rate carrying dandelion-based bionic proppant of smaller size and higher concentration can form a large packing area in the top/bottom location of the shale fracture.
- 20 April 2026
- Published by Society of Petroleum Engineers (SPE) in SPE Journal
- Vol. 31 (06) , 4089-4105
Visual Laboratory Tests Effect of Operational Parameters on Dandelion-Based Bionic Proppant Transport in a Hydraulic Fracture with Rough Surfaces
Summary: The higher packing height and efficient placement and transportation of proppants in deep shale fractures determine the later oil and gas production. However, as the depth of the shale formation increases and the temperature rises, the viscosity of the fracturing fluid decreases significantly. Achieving efficient transport of low-viscosity liquids carrying proppants has long been an urgent issue that needs to be addressed in developing deep shale gas reservoirs. Based on previous research, it has been proved that a dandelion-structured proppant can solve the above problems. However, the key operational factors influencing dandelion-based bionic proppant placement remain unclear. For this study, we built a rough surface of the shale vertical fracture model and conducted laboratory tests on the dandelion-based bionic proppant transportation and distribution under different key factors. The experimental results show for the first time that compared with the piling-up mechanism of conventional proppants (spherical shaped proppant), the dandelion-based bionic proppant forms an upper and lower packing shape. In addition, the lower-viscosity fluid with a higher injection rate carrying dandelion-based bionic proppant of smaller size and higher concentration can form a large packing area in the top/bottom location of the shale fracture.
- 27 June 2024
- Published by Society of Petroleum Engineers (SPE) in SPE Journal
- Vol. 29 (09) , 4856-4872
Experimental Study of Microproppant Transportation in a Fracture with Operational Factors and Application in a Shale Gas Field
Summary: When using hydraulic fracturing technology, microproppants (MPs) are crucial in filling and propping natural and deep-location fracture channels. In the last decades, numerous studies focused on the transportation mechanism of conventional-sized proppants (CPs) with 20/40-mesh, 40/70-mesh, and 70/140-mesh sizes using fracture models with different operational factors such as pump rate, fluid viscosity, proppant size, proppant concentration, inlet number, inlet location, and alternating injection mode. However, the effects of these operational factors on MP transportation mechanisms remain unclear. This study used the experimental method to test how these factors affect proppant placement in the fracture model. Some new findings showed that unlike CPs piling up in the fracture models, MPs exhibited no accumulation/piling-up behavior. Moreover, the change in viscosity of fracturing fluid did not affect the MP transport capacity, making it possible to use slickwater with lower viscosity as the carrier liquid for MPs. Finally, adding MPs with optimal operational parameters to fractures in the case study well significantly improved gas production compared with adjacent wells, proving the feasibility of the proposed approach.
- 27 June 2024
- Published by Society of Petroleum Engineers (SPE) in SPE Journal
- Vol. 29 (09) , 4856-4872
Experimental Study of Microproppant Transportation in a Fracture with Operational Factors and Application in a Shale Gas Field
Summary: When using hydraulic fracturing technology, microproppants (MPs) are crucial in filling and propping natural and deep-location fracture channels. In the last decades, numerous studies focused on the transportation mechanism of conventional-sized proppants (CPs) with 20/40-mesh, 40/70-mesh, and 70/140-mesh sizes using fracture models with different operational factors such as pump rate, fluid viscosity, proppant size, proppant concentration, inlet number, inlet location, and alternating injection mode. However, the effects of these operational factors on MP transportation mechanisms remain unclear. This study used the experimental method to test how these factors affect proppant placement in the fracture model. Some new findings showed that unlike CPs piling up in the fracture models, MPs exhibited no accumulation/piling-up behavior. Moreover, the change in viscosity of fracturing fluid did not affect the MP transport capacity, making it possible to use slickwater with lower viscosity as the carrier liquid for MPs. Finally, adding MPs with optimal operational parameters to fractures in the case study well significantly improved gas production compared with adjacent wells, proving the feasibility of the proposed approach.
- 2 November 2023
- Published by Society of Petroleum Engineers (SPE) in SPE Journal
- Vol. 29 (02) , 1061-1075
Visual Laboratory Tests: Effect of Operational Parameters on Proppant Transport in a 3D Printed Vertical Hydraulic Fracture with Two-Sided Rough Surfaces
Summary: Hydraulic fracturing technology is an effective measure that can improve oil and gas production and achieve enormous economic benefits owing to it phenomenally increasing the oil recovery from the low intrinsic permeability of the compact rock. Good placement and distribution of the proppant in the hydraulic fractures can provide successful stimulation for a well, which is essential for applying the hydraulic fracturing process. Previous studies extensively explored proppant placement, distribution, and operational factors in simplified smooth surface fracture models. However, the operational factors such as pump rate, proppant concentration, proppant size, fluid viscosity, and inlet condition (pulse time) involved in proppant placement and distribution in realistic rough surfaces of fractures are not clearly understood. In particular, the law of proppant transport in a two-sided rough surface of fracture with changes in the aforementioned operational factors was unclear. Hence, in this study, we investigated the effect of these operational factors on proppant placement and transport in both the smooth surface fracture model and the two-sided rough surface fracture model. The results suggested that the traditional law of proppant transport drawn on the smooth surface fracture model did not apply to the two-sided rough surface model. It is suggested that selecting corresponding variables was needed to reduce the risk of proppant bridging and offer a better channel ratio.
- 2 November 2023
- Published by Society of Petroleum Engineers (SPE) in SPE Journal
- Vol. 29 (02) , 1061-1075
Visual Laboratory Tests: Effect of Operational Parameters on Proppant Transport in a 3D Printed Vertical Hydraulic Fracture with Two-Sided Rough Surfaces
Summary: Hydraulic fracturing technology is an effective measure that can improve oil and gas production and achieve enormous economic benefits owing to it phenomenally increasing the oil recovery from the low intrinsic permeability of the compact rock. Good placement and distribution of the proppant in the hydraulic fractures can provide successful stimulation for a well, which is essential for applying the hydraulic fracturing process. Previous studies extensively explored proppant placement, distribution, and operational factors in simplified smooth surface fracture models. However, the operational factors such as pump rate, proppant concentration, proppant size, fluid viscosity, and inlet condition (pulse time) involved in proppant placement and distribution in realistic rough surfaces of fractures are not clearly understood. In particular, the law of proppant transport in a two-sided rough surface of fracture with changes in the aforementioned operational factors was unclear. Hence, in this study, we investigated the effect of these operational factors on proppant placement and transport in both the smooth surface fracture model and the two-sided rough surface fracture model. The results suggested that the traditional law of proppant transport drawn on the smooth surface fracture model did not apply to the two-sided rough surface model. It is suggested that selecting corresponding variables was needed to reduce the risk of proppant bridging and offer a better channel ratio.
- 28 September 2023
- Published by Society of Petroleum Engineers (SPE) in SPE Journal
- Vol. 29 (01) , 346-361
A New Type Microproppant and Its Property Evaluation for Shale Gas Reservoirs
Summary: Modern hydraulic fracturing technologies relied on maintaining the natural fracture of the shale reservoir open and providing its long-term conductivity by injecting flow with proppant particles of various sizes. However, some natural fractures were too narrow for the conventional macro-sized proppants to enter, which greatly reduced the gas flow area and productivity and implied an increasing demand for micro-sized proppants that could be easily transported in narrow natural fractures. This study introduced innovative microproppants produced from abandoned tailings. Their basic characteristics were experimentally obtained, and the impact of various factors on microproppant placement and transportation in fractures was analyzed using a physical analog fracture model. The performed field and laboratory tests proved that this microproppant combined the merits of low activity, low cost, and easy utilization in the petroleum field. Besides, in the experiments of prefabricated fractures, the permeability of fractures filled with this type of microproppant exceeded that of fractures with no microproppant under temperature variation from 30°C to 90°C. Finally, visual examination of prefabricated fractures showed that the transport capacity of this new type of microproppant significantly outperformed that of the microproppants made of quartz sand and ceramic with the same particle size.
- 28 September 2023
- Published by Society of Petroleum Engineers (SPE) in SPE Journal
- Vol. 29 (01) , 346-361
A New Type Microproppant and Its Property Evaluation for Shale Gas Reservoirs
Summary: Modern hydraulic fracturing technologies relied on maintaining the natural fracture of the shale reservoir open and providing its long-term conductivity by injecting flow with proppant particles of various sizes. However, some natural fractures were too narrow for the conventional macro-sized proppants to enter, which greatly reduced the gas flow area and productivity and implied an increasing demand for micro-sized proppants that could be easily transported in narrow natural fractures. This study introduced innovative microproppants produced from abandoned tailings. Their basic characteristics were experimentally obtained, and the impact of various factors on microproppant placement and transportation in fractures was analyzed using a physical analog fracture model. The performed field and laboratory tests proved that this microproppant combined the merits of low activity, low cost, and easy utilization in the petroleum field. Besides, in the experiments of prefabricated fractures, the permeability of fractures filled with this type of microproppant exceeded that of fractures with no microproppant under temperature variation from 30°C to 90°C. Finally, visual examination of prefabricated fractures showed that the transport capacity of this new type of microproppant significantly outperformed that of the microproppants made of quartz sand and ceramic with the same particle size.