Xing-Da Su
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Xing-Da Su has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Qing Li
Huazhong University of Science and Technology
4 shared publications Hong-Ru Liu
Huazhong University of Science and Technology
3 shared publicationsTong Huang
Huazhong University of Science and Technology
3 shared publicationsRui-Qi Liu
Huazhong University of Science and Technology
2 shared publications- Zebing Zhou
Huazhong University of Science and Technology
2 shared publications - Hang Yin
Huazhong University of Science and Technology
1 shared publication
Latest Publications
- 28 September 2026
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 37 (39) , 395002
Measurement of dissipation-coupling mechanisms in a two-stage pendulum system for gravitational experiment
A two-stage pendulum system, comprising a lower torsion pendulum and an upper torsion pendulum, is widely employed in gravitational experiments. While prior research has focused primarily on the vibration isolation capability of the magnetic damper, this study investigates the dissipation coupling mechanism between the upper and lower torsion pendulums through theoretical analysis and experimental validation. The dynamic model of the two-stage pendulum system is analyzed, and expressions for the quality factor (hereafter denoted as Q value) of each stage are derived. An experimental apparatus is designed and constructed to enable modulation of the Q value of the upper torsion pendulum and then measure the response of the lower torsion pendulum. Results indicate that when the horizontal magnetic field at the center of the upper torsion pendulum is increased from 1.37 to 20.63 mT, the Q value of the upper torsion pendulum decreases from 701 to 7, which leads to a reduction in the Q value of the lower torsion pendulum—from 1.6 × 10 5 to 9.0 × 10 4 . In gravitational experiments with a silica fiber, after using the magnetic damper, the Q value of the lower torsion pendulum can be reduced by approximately half, which results in an increase in thermal noise. This work offers valuable insights into the dissipation coupling mechanism of a two-stage pendulum system and aids in assessing noise sources in precision measurements.
- 28 September 2026
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 37 (39) , 395002
Measurement of dissipation-coupling mechanisms in a two-stage pendulum system for gravitational experiment
A two-stage pendulum system, comprising a lower torsion pendulum and an upper torsion pendulum, is widely employed in gravitational experiments. While prior research has focused primarily on the vibration isolation capability of the magnetic damper, this study investigates the dissipation coupling mechanism between the upper and lower torsion pendulums through theoretical analysis and experimental validation. The dynamic model of the two-stage pendulum system is analyzed, and expressions for the quality factor (hereafter denoted as Q value) of each stage are derived. An experimental apparatus is designed and constructed to enable modulation of the Q value of the upper torsion pendulum and then measure the response of the lower torsion pendulum. Results indicate that when the horizontal magnetic field at the center of the upper torsion pendulum is increased from 1.37 to 20.63 mT, the Q value of the upper torsion pendulum decreases from 701 to 7, which leads to a reduction in the Q value of the lower torsion pendulum—from 1.6 × 10 5 to 9.0 × 10 4 . In gravitational experiments with a silica fiber, after using the magnetic damper, the Q value of the lower torsion pendulum can be reduced by approximately half, which results in an increase in thermal noise. This work offers valuable insights into the dissipation coupling mechanism of a two-stage pendulum system and aids in assessing noise sources in precision measurements.
- 30 April 2025
- Published by American Physical Society (APS) in Physical Review D
- Vol. 111 (7)
Detecting interactions mediated by axions with a milligram-scale torsion pendulum
- 30 April 2025
- Published by American Physical Society (APS) in Physical Review D
- Vol. 111 (7)
Detecting interactions mediated by axions with a milligram-scale torsion pendulum
- 29 October 2024
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 22 (4)
Influence of magnetic field on a torsion pendulum featuring high- silica fiber- 29 October 2024
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 22 (4)
Influence of magnetic field on a torsion pendulum featuring high- silica fiber- 1 September 2023
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 94 (9)
Ground testing of release impulse for the aluminum cubic test mass with a compound pendulum for the TianQin project
In the space-borne gravitational wave detection TianQin project, the locking and releasing of test mass is one of the key technologies. The test mass will be locked during the spacecraft launch and then released to free fall for the science phase. The residual release impulse is required to be on the order of magnitude of 10−5 kg m/s, which allows us to capture the test mass by the force authority of the capacity control. In this paper, the release impulse of the aluminum test mass is measured with a compound pendulum for the TianQin project. The test mass is locked by two tips from opposite positions, and the release impulse is obtained from the oscillation of the pendulum. When the aluminum test mass is locked and released by the stainless steel and aluminum tips, the release impulses and their uncertainties are on the order of magnitude of 10−5and 10−7 kg m/s, respectively. This provides a feasible measurement scheme for the impulse testing in the TianQin project.
- 1 September 2023
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 94 (9)
Ground testing of release impulse for the aluminum cubic test mass with a compound pendulum for the TianQin project
In the space-borne gravitational wave detection TianQin project, the locking and releasing of test mass is one of the key technologies. The test mass will be locked during the spacecraft launch and then released to free fall for the science phase. The residual release impulse is required to be on the order of magnitude of 10−5 kg m/s, which allows us to capture the test mass by the force authority of the capacity control. In this paper, the release impulse of the aluminum test mass is measured with a compound pendulum for the TianQin project. The test mass is locked by two tips from opposite positions, and the release impulse is obtained from the oscillation of the pendulum. When the aluminum test mass is locked and released by the stainless steel and aluminum tips, the release impulses and their uncertainties are on the order of magnitude of 10−5and 10−7 kg m/s, respectively. This provides a feasible measurement scheme for the impulse testing in the TianQin project.