MSMatthew G. Sandberg

Matthew G. Sandberg

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Matthew G. Sandberg has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Non-Ideal Effects in Shock-Tube Facilities with Elevated Initial Temperatures

    by M. G. Sandberg, S. P. Cooper, D. J. Mohr, E. L. Petersen, D. Nativel, M. Fikri, C. Schulz

  • Ignition of Various Lubricating Oil Compositions Using a Shock Tube

    by Matthew Abulail, Sean P. Cooper, Matthew G. Sandberg, Eric L. Petersen

    With new restrictions imposed on gas turbine efficiencies and power outputs, lubricating oils are used at higher temperatures and harsher conditions leading to potential, unintended combustion. To establish an understanding of lubricating oil's resistance to combustion, a new spray injector system was utilized in the High-Pressure Shock Tube (HPST) Facility at the TEES Turbomachinery Laboratory at Texas A&M University. Two gas turbine oils (Mobil DTE 732 and Castrol Perfecto X32), a base mineral oil, and a surrogate (n-hexadecane) were tested at postreflected shock conditions at equivalence ratios near 2.5. Castrol Perfecto X32 was also characterized at an equivalence ratio near 1.2. All of the lubricating oils displayed ignition between temperatures of 1152 and 1383 K and near atmospheric pressures. To characterize combustion, two different definitions of ignition delay time (IDT) were considered: sidewall OH* chemiluminescence and sidewall pressure. Both definitions were used to create temperature-dependent correlations for each of the lubricating oils. In general, both definitions provided similar results within the accuracy of the measurements. One trend from the data herein is that the brand-name oils (Mobil DTE 732 and Castrol Perfecto X32) provided ignition delay times that were similar to each other but slightly larger than the corresponding mineral oil and n-hexadecane results. This difference could be attributed to the additives that are present in the brand-name oils.


  • Open Access

    An Experimental and Detailed Kinetics Modeling Study of Norbornadiene in Hydrogen and Methane Mixtures: Ignition Delay Time and Spectroscopic CO Measurements

    by Matthew G. Sandberg, Claire M. Grégoire, Darryl J. Mohr, Olivier Mathieu, Eric L. Petersen

    High-energy-density compounds such as norbornadiene (NBD) are being considered as potential cost-effective fuel additives, or partial replacements, for high-speed propulsion applications. To assess the ability of NBD to influence basic fuel reactivity enhancement and to build a database for developing future NBD kinetics models, ignition delay times were measured in two shock-tube facilities at Texas A&M University for H2/O2, CH4/O2, H2/NBD/O2, and CH4/NBD/O2 mixtures (ϕ = 1) that were highly diluted in argon. The reflected-shock temperatures ranged from 1014 to 2227 K, and the reflected-shock pressures remained near 1 atm for all of the experiments, apart from the hydrogen mixtures, which were also tested near 7 atm, targeting the second-explosion limit. The molar concentrations of NBD were supplemented to the baseline mixtures representing 1–2% of the fuel by volume. A chemiluminescence diagnostic was used to track the time history of excited hydroxyl radical (OH*) emission, which was used to define the ignition delay time at the sidewall location. Spectroscopic CO data were also obtained using a tunable quantum cascade laser to complement both the ignition and the chemiluminescence data. The CH4/O2 mixtures containing NBD demonstrated reduced ignition delay times, with a pronounced effect at lower temperatures. Conversely, this additive increased the ignition delay time dramatically in the H2/O2 mixture, which was attributed to changes in the fundamental chemistry with the introduction of molecules containing carbon bonds, which require stronger activation energies for ignition. Correlations were developed to predict the ignition delay time, which depends on species concentration, temperature, and pressure. Additionally, one tentative mechanism was tested, combining base chemistry from NUIGMech 1.1 with pyrolysis and oxidation reactions for NBD using the recent efforts from experimental and theoretical literature studies. The numerical predictions show that the rapid decomposition of NBD provides a pool of active H-radicals, significantly increasing the reactivity of methane. This study represents the first set of gas-phase ignition and CO time-history data measured in a shock tube for hydrogen and methane mixtures containing the additive NBD.