Cristina Isabel Martínez Castañeda
Cristina Isabel Martínez Castañeda has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Camilo Carrillo
Research Group on Efficient and Digital Engineering, University of Vigo, 36310 Vigo, Spain
3 shared publications - Eloy Díaz Dorado
Research Group on Efficient and Digital Engineering, University of Vigo, 36310 Vigo, Spain
3 shared publications - José Cidrás Pidre
Research Group on Efficient and Digital Engineering, University of Vigo, 36310 Vigo, Spain
3 shared publications - José Florencio Sánchez Rúa
Stellantis Group, 36210 Vigo, Spain
3 shared publications - Adrián Juan Pérez Peña
Research Group on Efficient and Digital Engineering, University of Vigo, 36310 Vigo, Spain
2 shared publications - Diego San Facundo López
Research Group on Efficient and Digital Engineering, University of Vigo, 36310 Vigo, Spain
1 shared publication
Latest Publications
- Open Access
- 26 May 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (11) , 5336
Non-Intrusive Electrical Monitoring for the Real-Time Estimation of Production Parameters in a Sheet Metal Stamping Line
Metal forming processes, characterized by high energy consumption, are widely used in modern manufacturing. In this context, methods for monitoring the operational state and cycle-dependent metrics of manufactured parts are essential for implementing energy optimization strategies. Such strategies require moving away from time-aggregated energy assessments, which fail to capture part-level variability, toward analyses at the granularity of individual parts. This article introduces a non-intrusive methodology to enable the identification, in real time, of the part under production and to estimate cycle time and energy consumption per part. The method relies on electrical measurements taken at the switchboards. The RMS current and power values are the inputs to a machine-learning (ML) approach that identifies the part in production. To this end, the time-domain and time–frequency-domain features extracted from the signals are employed to train a Support Vector Machine (SVM) classifier that achieves a test accuracy of 99.9%. Next, the approach estimates cycle time and energy per cycle in real time. Approximately 58,000 production cycles, corresponding to several part types, were characterized. The proposed approach demonstrates that part-level identification and per-cycle energy estimation can be achieved in real time using only electrical measurements in an industrial process.
- 26 May 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (11) , 5336
Open AccessNon-Intrusive Electrical Monitoring for the Real-Time Estimation of Production Parameters in a Sheet Metal Stamping Line
Metal forming processes, characterized by high energy consumption, are widely used in modern manufacturing. In this context, methods for monitoring the operational state and cycle-dependent metrics of manufactured parts are essential for implementing energy optimization strategies. Such strategies require moving away from time-aggregated energy assessments, which fail to capture part-level variability, toward analyses at the granularity of individual parts. This article introduces a non-intrusive methodology to enable the identification, in real time, of the part under production and to estimate cycle time and energy consumption per part. The method relies on electrical measurements taken at the switchboards. The RMS current and power values are the inputs to a machine-learning (ML) approach that identifies the part in production. To this end, the time-domain and time–frequency-domain features extracted from the signals are employed to train a Support Vector Machine (SVM) classifier that achieves a test accuracy of 99.9%. Next, the approach estimates cycle time and energy per cycle in real time. Approximately 58,000 production cycles, corresponding to several part types, were characterized. The proposed approach demonstrates that part-level identification and per-cycle energy estimation can be achieved in real time using only electrical measurements in an industrial process.
- Open Access
- 13 March 2026
- Published by MDPI AG in Preprints.org
Non-Intrusive Electrical Monitoring for Real-Time Estimation of the Production Parameters in a Sheet Metal Stamping Line
Metal forming processes play a key role in modern manufacturing, but they are characterized by high energy consumption and low overall efficiency. In this context, precise methods for monitoring the operational state and cycle-dependent metrics of manufactured parts are essential to implement energy optimization strategies. This article presents a data-driven and non-intrusive methodology to identify, in real time, the part under production and to estimate both cycle time and energy consumption per part. The method relies exclusively on electrical measurements taken at the main switchboard and at the first process-stage switchboard. These signals are used to calculate electrical quantities such as root mean square (RMS) current and active power, and a machine-learning (ML) approach is proposed to automatically identify the part in production. To this end, time-domain features are extracted directly from the signals, while time-frequency features are extracted using Continuous Wavelet Transform (CWT). These features are employed to train Support Vector Machine (SVM) classifiers optimized via grid search. Experimental results show that the model achieves a test accuracy of 99.9%. Once the production state is identified, the system estimates cycle time and energy per cycle in real time. Approximately 58,000 production cycles, corresponding to several part types were characterized.
- 13 March 2026
- Published by MDPI AG in Preprints.org
Open AccessNon-Intrusive Electrical Monitoring for Real-Time Estimation of the Production Parameters in a Sheet Metal Stamping Line
Metal forming processes play a key role in modern manufacturing, but they are characterized by high energy consumption and low overall efficiency. In this context, precise methods for monitoring the operational state and cycle-dependent metrics of manufactured parts are essential to implement energy optimization strategies. This article presents a data-driven and non-intrusive methodology to identify, in real time, the part under production and to estimate both cycle time and energy consumption per part. The method relies exclusively on electrical measurements taken at the main switchboard and at the first process-stage switchboard. These signals are used to calculate electrical quantities such as root mean square (RMS) current and active power, and a machine-learning (ML) approach is proposed to automatically identify the part in production. To this end, time-domain features are extracted directly from the signals, while time-frequency features are extracted using Continuous Wavelet Transform (CWT). These features are employed to train Support Vector Machine (SVM) classifiers optimized via grid search. Experimental results show that the model achieves a test accuracy of 99.9%. Once the production state is identified, the system estimates cycle time and energy per cycle in real time. Approximately 58,000 production cycles, corresponding to several part types were characterized.
- Open Access
Detailed Energy Analysis of a Sheet-Metal-Forming Press from Electrical Measurements
This paper presents a methodology that allows for the detection of the state of a sheet-metal-forming press, the parts being produced, their cadence, and the energy demand for each unit produced. For this purpose, only electrical measurements are used. The proposed analysis is conducted at the level of the press subsystems: main motor, transfer module, cushion, and auxiliary systems, and is intended to count, classify, and monitor the production of pressed parts. The power data are collected every 20 ms and show cyclic behavior, which is the basis for the presented methodology. A neural network (NN) based on heuristic rules is developed to estimate the press states. Then, the production period is determined from the power data using a least squares method to obtain normalized harmonic coefficients. These are the basis for a second NN dedicated to identifying the parts in production. The global error in estimating the parts being produced is under 1%. The resulting information could be handy in determining relevant information regarding the press behavior, such as energy per part, which is necessary in order to evaluate the energy performance of the press under different production conditions.
Open AccessDetailed Energy Analysis of a Sheet-Metal-Forming Press from Electrical Measurements
This paper presents a methodology that allows for the detection of the state of a sheet-metal-forming press, the parts being produced, their cadence, and the energy demand for each unit produced. For this purpose, only electrical measurements are used. The proposed analysis is conducted at the level of the press subsystems: main motor, transfer module, cushion, and auxiliary systems, and is intended to count, classify, and monitor the production of pressed parts. The power data are collected every 20 ms and show cyclic behavior, which is the basis for the presented methodology. A neural network (NN) based on heuristic rules is developed to estimate the press states. Then, the production period is determined from the power data using a least squares method to obtain normalized harmonic coefficients. These are the basis for a second NN dedicated to identifying the parts in production. The global error in estimating the parts being produced is under 1%. The resulting information could be handy in determining relevant information regarding the press behavior, such as energy per part, which is necessary in order to evaluate the energy performance of the press under different production conditions.