YZYouchao Zhang

Youchao Zhang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Youchao Zhang has a total of 9 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Pyrolysis Modeling and Kinetic Study of Typical Insulation Materials for Building Exterior Envelopes

    by Youchao Zhang, Bo Wang, Li Xu, Zhiming Ma

    Thermal insulation materials are important for building energy conservation, but the inherent combustibility of these materials increases the fire risk of building facades. To better understand the fire behaviors of these materials, the study of the kinetics of thermal insulation pyrolysis is particularly important because it is the initial step in ignition and combustion during fire. In this paper, the pyrolysis behavior of expanded polystyrene (EPS), a typical non-charring insulation polymer, has been investigated by thermogravimetric analysis at five different heating rates. The model-free kinetic analysis showed that the obtained average values for E and lnA were 151.23 kJ/mol and 21.29 ln/s, respectively. Model-fitting CR and masterplot methods indicated that f(α) = [2(1-α)[-ln(1-α)]]1/2 is considered the pyrolysis reaction mechanism of EPS degradation. Based on these results, the equation of the kinetic compensation effect was further developed as lnA = −3.1955 + 0.1736 Eα. Finally, the reaction model was reconstructed with the result of the expression f(α) = 3.95335α0.24174 (1-α) [-ln(1-α)]1.64712. In addition, PY-GC-MS experiments were conducted to analyze the composition of EPS pyrolysis volatiles. The results showed that the products were mainly compounds of benzene, naphthalene, and biphenyl. The analysis of EPS pyrolysis behavior and evolved gas provides numerical guidance for the future treatment and fire protection of insulation materials.


  • Top Cited Papers
    Open Access

    Properties of Sustainable Earth Construction Materials: A State-of-the-Art Review

    by Youchao Zhang, Shuangli Jiang, Dengzhou Quan, Kun Fang, Bo Wang, Zhiming Ma

    As a significant symbol of human civilization advancement, earth construction not only inherits traditional architectural culture but also enjoys worldwide popularity and widespread usage throughout China due to its economic and environmentally friendly nature, as well as its moisture absorption and heat storage advantages. Consequently, earth construction has garnered considerable attention from international scholars. This paper compiles relevant data to review the developmental trajectory of earth construction, while conducting an in-depth analysis of the performance characteristics of earthen materials. Furthermore, it provides a comprehensive overview of the impact of three modification methods on the mechanical and durability properties of earthen materials, along with a discussion on the research concerning the thermal and moisture performance of these materials. Simultaneously, discussions were held on the relevant research findings and potential directions for the development of earthen materials. Finally, conclusions were drawn, suggesting a comprehensive utilization of their thermal and moisture performance, emphasizing the enhancement of their mechanical and durability performance. Additionally, attention was urged towards the economic and ecological aspects during the construction and maintenance phases of earth construction. These recommendations aim to facilitate the sustainable development and widespread application of earthen materials in the future.


  • Open Access

    Development of Sustainable Cement-Based Materials with Ultra-High Content of Waste Concrete Powder: Properties and Improvement

    by Ruihan Hu, Youchao Zhang, Zhiyu Zhang, Zhiming Ma

    The recycled powder (RP) of construction waste, as a kind of silica–aluminum waste, can have a certain gelling effect after alkali activation modification. Sodium silicate (water glass) and NaOH are used as composite alkali activators to stimulate RP to prepare alkali-activated mortar. The different micro and macro properties of RP are studied under the ultra-high substitution rates of 70%, 80%, 90%, and 100% of cementation-based materials. The results show that the mechanical properties of the regenerated powder mixture decrease gradually with the increase in the substitution rate. When the replacement rate of RP is 70%, the 3 d and 28 d compressive strength decreases by 73.63% and 69.46%, respectively. When the replacement rate reaches 100%, the 3 d and 28 d compressive strength decreases by 96.98% and 93.74%, respectively. The cement-based material after alkali excitation has the characteristics of early strength and the mechanical properties are greatly improved, and the mechanical properties of cement-based materials can be effectively increased by increasing the modulus of water glass. At 70%RP substitution rate, the compressive strength of 28 d increases by 3.59% and 107.71% when the modulus of sodium silicate is 1.0 M and 1.6 M, compared with the unactivated groups. At 100%RP substitution rate, the 28 d strength of the unexcited specimen is 0.92 MPa, and the 28 d compressive strength reaches 6.15 MPa and 12.86 MPa when the modulus of sodium silicate is 1.0 M and 1.6 M. The results show that the alkali-activated mortar has good application potential.