Cheng-Han Ke
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Cheng-Han Ke has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Chih-Lung Lin
Department of Electrical Engineering, National Cheng Kung University, Tainan, Taiwan
5 shared publications - Po-Cheng Lai
AUO Corporation, Hsinchu, Taiwan
3 shared publications Yu-Chang Chiu
Department of Electrical Engineering, National Cheng Kung University, Tainan, Taiwan
3 shared publications- Chia-Lun Lee
Department of Electrical Engineering, National Cheng Kung University, Tainan 701-01, Taiwan
2 shared publications - Jui-Hung Chang
Department of Electrical Engineering, National Cheng Kung University, Tainan, Taiwan
2 shared publications Li-Wei Shih
Department of Electrical Engineering, National Cheng Kung University, Tainan, Taiwan
2 shared publications
Latest Publications
- Open Access
- 15 October 2026
- Published by Wiley in Advanced Intelligent Systems
- p. e70567
AI‐Powered Smart Displays and AR Glasses: Perspectives and Challenges
This perspective paper reviews recent advancements and explores future, exciting opportunities for both artificial intelligence (AI)‐powered smart displays and AI‐assisted augmented reality (AR) eyeglasses. To begin, we analyze fundamental AI‐enhanced image‐quality techniques, including perceptual resolution upscaling algorithms, tone mapping, reverse tone mapping, and image‐quality analysis. Next, we examine the practical implementations of AI technologies for smart displays, in which both the visual experience and use case of novel display technologies can be improved. Finally, we further explore AI integration into wearable AR glasses, highlighting the enabled capabilities to improve display systems through waveguide combiner optimization and image correction, and exploring recent advances that go beyond color in AR glasses, such as eye tracking, foveated rendering, and physiological sensing. By outlining emerging trends and promising directions for next‐generation display technologies, this perspective will demonstrate the critical role of AI in enabling new capabilities, user experiences, and technological breakthroughs in the field of displays.
- 15 October 2026
- Published by Wiley in Advanced Intelligent Systems
- p. e70567
Open AccessAI‐Powered Smart Displays and AR Glasses: Perspectives and Challenges
This perspective paper reviews recent advancements and explores future, exciting opportunities for both artificial intelligence (AI)‐powered smart displays and AI‐assisted augmented reality (AR) eyeglasses. To begin, we analyze fundamental AI‐enhanced image‐quality techniques, including perceptual resolution upscaling algorithms, tone mapping, reverse tone mapping, and image‐quality analysis. Next, we examine the practical implementations of AI technologies for smart displays, in which both the visual experience and use case of novel display technologies can be improved. Finally, we further explore AI integration into wearable AR glasses, highlighting the enabled capabilities to improve display systems through waveguide combiner optimization and image correction, and exploring recent advances that go beyond color in AR glasses, such as eye tracking, foveated rendering, and physiological sensing. By outlining emerging trends and promising directions for next‐generation display technologies, this perspective will demonstrate the critical role of AI in enabling new capabilities, user experiences, and technological breakthroughs in the field of displays.
- 8 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (5) , 2609-2614
LTPS TFT-Based Optical Sensor Detecting Degradation of OLED to Improve Image Sticking for AMOLED Displays
An in-pixel optical sensor with threshold voltage (VTH) compensation is proposed to maintain the brightness of a panel after long-term use of an active-matrix organic light-emitting diode (AMOLED) display. The proposed optical-sensing mechanism measures the ratio of the variation in the driving current to detect the decay in the brightness of the panel, which compensates for the reduced brightness and extends the lifetime of the OLED display. The proposed circuit also compensates for variation in the threshold voltage for a low-temperature polycrystalline thin-film transistor (LTPS TFTs) to increase the accuracy of sensing the electrical characteristics of the driving TFTs, which reduces the error in the measured brightness ratio. To validate the compensation performance, a simulation model that uses fabricated LTPS TFTs and an optical sensor with silicon-rich oxide (SRO) is established. The simulation results confirm that the maximum normalized current error rate decreases from 20.90% to 0.36% when the brightness of the panel decays by 10% if the proposed circuit is used compared to the original active pixel sensor (APS) 3T circuit. A 1.28-in LTPS AMOLED display that uses the proposed in-cell optical sensor is fabricated. The proposed circuit successfully compensates for the degradation. The maximum brightness ratio error is only 1.00%, and the image sticking is improved by sensing variations in the driving currents using the proposed circuit when brightness decays by over 5%. This verifies the feasibility of the proposed pixel circuit for use in AMOLED displays with an in-pixel optical sensor.
- 8 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (5) , 2609-2614
LTPS TFT-Based Optical Sensor Detecting Degradation of OLED to Improve Image Sticking for AMOLED Displays
An in-pixel optical sensor with threshold voltage (VTH) compensation is proposed to maintain the brightness of a panel after long-term use of an active-matrix organic light-emitting diode (AMOLED) display. The proposed optical-sensing mechanism measures the ratio of the variation in the driving current to detect the decay in the brightness of the panel, which compensates for the reduced brightness and extends the lifetime of the OLED display. The proposed circuit also compensates for variation in the threshold voltage for a low-temperature polycrystalline thin-film transistor (LTPS TFTs) to increase the accuracy of sensing the electrical characteristics of the driving TFTs, which reduces the error in the measured brightness ratio. To validate the compensation performance, a simulation model that uses fabricated LTPS TFTs and an optical sensor with silicon-rich oxide (SRO) is established. The simulation results confirm that the maximum normalized current error rate decreases from 20.90% to 0.36% when the brightness of the panel decays by 10% if the proposed circuit is used compared to the original active pixel sensor (APS) 3T circuit. A 1.28-in LTPS AMOLED display that uses the proposed in-cell optical sensor is fabricated. The proposed circuit successfully compensates for the degradation. The maximum brightness ratio error is only 1.00%, and the image sticking is improved by sensing variations in the driving currents using the proposed circuit when brightness decays by over 5%. This verifies the feasibility of the proposed pixel circuit for use in AMOLED displays with an in-pixel optical sensor.
- 24 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Solid-State Circuits Letters
- Vol. 9, 89-92
A 7056-PPI Pixel Circuit With Low-Leakage Structure for Active-Matrix Monochrome Micro-LED Displays
This work presents a 5T2C pixel circuit for active-matrix (AM) micro-displays in near-eye display applications. The circuit supports monochrome micro light-emitting diode (micro-LED) displays with ultra-high resolution of 7056 pixels per inch (PPI). The circuit is designed and fabricated based on medium-voltage (MV) devices from the 55-nm high-voltage (HV) CMOS process. The total storage capacitance is only 6.588 fF, and the stored charge is susceptible to transistor leakage current, resulting in significant deviations in the average driving currents. To mitigate the deviations, the circuit isolates the switching transistor (TS) from the data signals, increases the body voltage for TS, and minimizes the body area of TS. The low-leakage structure effectively reduces off leakage current (IOFF) and reverse-bias PN-junction leakage current (IREV) of the transistors. Simulation results demonstrate that the proposed circuit produces slight current deviations compared to a conventional 2T1C circuit. Measurement results also confirm that the deviation rate is less than 6.23% for all gray levels.
- 24 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Solid-State Circuits Letters
- Vol. 9, 89-92
A 7056-PPI Pixel Circuit With Low-Leakage Structure for Active-Matrix Monochrome Micro-LED Displays
This work presents a 5T2C pixel circuit for active-matrix (AM) micro-displays in near-eye display applications. The circuit supports monochrome micro light-emitting diode (micro-LED) displays with ultra-high resolution of 7056 pixels per inch (PPI). The circuit is designed and fabricated based on medium-voltage (MV) devices from the 55-nm high-voltage (HV) CMOS process. The total storage capacitance is only 6.588 fF, and the stored charge is susceptible to transistor leakage current, resulting in significant deviations in the average driving currents. To mitigate the deviations, the circuit isolates the switching transistor (TS) from the data signals, increases the body voltage for TS, and minimizes the body area of TS. The low-leakage structure effectively reduces off leakage current (IOFF) and reverse-bias PN-junction leakage current (IREV) of the transistors. Simulation results demonstrate that the proposed circuit produces slight current deviations compared to a conventional 2T1C circuit. Measurement results also confirm that the deviation rate is less than 6.23% for all gray levels.
- Open Access
- 11 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Solid-State Circuits Society
- Vol. 5, 130-143
LTPO-TFT-Based Pixel Circuit With TFT, OLED, and Supply Voltage Compensation for Enhanced Luminance Uniformity in Variable-Frame-Rate AMOLED Smartwatch Displays
This work proposes a new pixel circuit using low-temperature polycrystalline silicon and oxide (LTPO) thin-film transistors (TFTs) for use in variable-frame-rate active-matrix organic light-emitting diode (AMOLED) smartwatch displays. The proposed circuit, including seven TFTs and two capacitors, can compensate for threshold voltage (VTH) variations of the driving TFTs (DTFTs), the turn-on voltages of the OLEDs (VOLEDs), and VSS IR rises; it is immune to VDD IR drops. It employs amorphous-indium-gallium-zinc-oxide (a-IGZO) TFTs, which exhibit low leakage currents, suppressing distortion in the gate voltage of the DTFT at low frame rates and enabling a stable OLED current (IOLED) to maintain consistent display luminance. A 1.28-inch LTPO AMOLED panel with a 416 W 416 resolution and the proposed pixel circuit are fabricated to verify the circuits performance. The experimental results thus obtained confirm that red, green, blue, and white images at frame rates from 45 Hz to 1 Hz exhibit uniformity without visible spot or line defects and a luminance error rate below 2.34 remain stable at gray levels of 32, 64, 128, and 255 during an extended emission period of 1 s, revealing no perceived image flicker at 1 Hz (with a JEITA flicker value below -54.747 dB). Therefore, the proposed circuit, with its highly uniform and stable currents at various frame rates, is promising for use in AMOLED smartwatch displays.
- 11 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Solid-State Circuits Society
- Vol. 5, 130-143
Open AccessLTPO-TFT-Based Pixel Circuit With TFT, OLED, and Supply Voltage Compensation for Enhanced Luminance Uniformity in Variable-Frame-Rate AMOLED Smartwatch Displays
This work proposes a new pixel circuit using low-temperature polycrystalline silicon and oxide (LTPO) thin-film transistors (TFTs) for use in variable-frame-rate active-matrix organic light-emitting diode (AMOLED) smartwatch displays. The proposed circuit, including seven TFTs and two capacitors, can compensate for threshold voltage (VTH) variations of the driving TFTs (DTFTs), the turn-on voltages of the OLEDs (VOLEDs), and VSS IR rises; it is immune to VDD IR drops. It employs amorphous-indium-gallium-zinc-oxide (a-IGZO) TFTs, which exhibit low leakage currents, suppressing distortion in the gate voltage of the DTFT at low frame rates and enabling a stable OLED current (IOLED) to maintain consistent display luminance. A 1.28-inch LTPO AMOLED panel with a 416 W 416 resolution and the proposed pixel circuit are fabricated to verify the circuits performance. The experimental results thus obtained confirm that red, green, blue, and white images at frame rates from 45 Hz to 1 Hz exhibit uniformity without visible spot or line defects and a luminance error rate below 2.34 remain stable at gray levels of 32, 64, 128, and 255 during an extended emission period of 1 s, revealing no perceived image flicker at 1 Hz (with a JEITA flicker value below -54.747 dB). Therefore, the proposed circuit, with its highly uniform and stable currents at various frame rates, is promising for use in AMOLED smartwatch displays.
- Open Access
- 9 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 78122-78131
Lifetime Optimization of Optical Sensing System With Highly Reliable a-Si:H TFT-Based Optical Sensor and Driver Circuit in Large AMLCDs
This paper presents a long-lifetime optical sensing system that integrates optical sensors and driver circuits that use hydrogenated amorphous silicon thin-film transistors (a-Si:H TFTs) to realize binary detection of optical signal with a multi-position sensing function for use in large active-matrix liquid crystal display (AMLCD). The optical sensor suppresses the effect of variations in ambient white light using a white-light photocurrent gating (WPCG) structure and increases the reliability of two photo TFTs by halving the drain-to-source voltage (VDS) stress. The driver circuit switches two driving TFTs between their two modes to recover the threshold voltage (VTH) shifts during a long sensing period or generate an output waveform with a large pulse width for driving the optical sensor. Experimental results indicate that the degradation of the photocurrent of the photo TFT is suppressed from 3.71 nA to 1.03 nA, representing an improvement of 72.2% relative to the original WPCG structure. The minimum difference between the output voltages of the optical sensing systems with and without an optical signal under illumination by ambient white light from 500 to 10000 lux is 18.58 V. According to an accelerated lifetime test, the feasibility of using the optical sensing system in large AMLCDs is verified.
- 9 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 78122-78131
Open AccessLifetime Optimization of Optical Sensing System With Highly Reliable a-Si:H TFT-Based Optical Sensor and Driver Circuit in Large AMLCDs
This paper presents a long-lifetime optical sensing system that integrates optical sensors and driver circuits that use hydrogenated amorphous silicon thin-film transistors (a-Si:H TFTs) to realize binary detection of optical signal with a multi-position sensing function for use in large active-matrix liquid crystal display (AMLCD). The optical sensor suppresses the effect of variations in ambient white light using a white-light photocurrent gating (WPCG) structure and increases the reliability of two photo TFTs by halving the drain-to-source voltage (VDS) stress. The driver circuit switches two driving TFTs between their two modes to recover the threshold voltage (VTH) shifts during a long sensing period or generate an output waveform with a large pulse width for driving the optical sensor. Experimental results indicate that the degradation of the photocurrent of the photo TFT is suppressed from 3.71 nA to 1.03 nA, representing an improvement of 72.2% relative to the original WPCG structure. The minimum difference between the output voltages of the optical sensing systems with and without an optical signal under illumination by ambient white light from 500 to 10000 lux is 18.58 V. According to an accelerated lifetime test, the feasibility of using the optical sensing system in large AMLCDs is verified.
- Open Access
- 12 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 11, 573-578
Analog PWM Method With Sweep Generation Structure Based on P-Type LTPS TFTs for Micro-LED Displays
This work proposes a novel pixel circuit using analog pulse width modulation (PWM) for micro light-emitting diode (micro-LED) displays. The proposed circuit generates uniform sweep waveforms and driving currents to control micro-LED emission precisely by compensating for threshold voltage (VTH) variations of p-type low-temperature polycrystalline silicon thinfilm transistors (LTPS TFTs) and VDD current-resistance drops (IR drops). Driven by the PWM method, micro-LED can operate with high wall-plug efficiency (WPE), leading to low power consumption. To analyze the circuit performance, the electrical characteristics of a micro-LED and LTPS TFTs are measured to establish the simulated models. The HSPICE simulation results present that the current error rates and time shift rates of emission currents are below 1.65% and 2.75%, respectively, with ±0.3 V variations in VTH and 1.2 V drops in VDD. Furthermore, the power improvement relative to a 7T1C pulse amplitude modulation (PAM) circuit is higher than 19.05% at all gray levels, confirming that the proposed circuit is suitable for use in micro-LED displays.
- 12 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 11, 573-578
Open AccessAnalog PWM Method With Sweep Generation Structure Based on P-Type LTPS TFTs for Micro-LED Displays
This work proposes a novel pixel circuit using analog pulse width modulation (PWM) for micro light-emitting diode (micro-LED) displays. The proposed circuit generates uniform sweep waveforms and driving currents to control micro-LED emission precisely by compensating for threshold voltage (VTH) variations of p-type low-temperature polycrystalline silicon thinfilm transistors (LTPS TFTs) and VDD current-resistance drops (IR drops). Driven by the PWM method, micro-LED can operate with high wall-plug efficiency (WPE), leading to low power consumption. To analyze the circuit performance, the electrical characteristics of a micro-LED and LTPS TFTs are measured to establish the simulated models. The HSPICE simulation results present that the current error rates and time shift rates of emission currents are below 1.65% and 2.75%, respectively, with ±0.3 V variations in VTH and 1.2 V drops in VDD. Furthermore, the power improvement relative to a 7T1C pulse amplitude modulation (PAM) circuit is higher than 19.05% at all gray levels, confirming that the proposed circuit is suitable for use in micro-LED displays.