VSV. P. Selyaev

V. P. Selyaev

*This is an algorithmically generated author record based on publicly available information.

V. P. Selyaev has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • INVESTIGATION OF THE PROPERTIES OF A WATERBORNE THERMAL INSULATION COMPOSITE BASED ON SHELL LIMESTONE-SHELL ROCK AND HOLLOW MICROSPHERES

    by Y.S. Orynbekov, Z.N. Altayeva, A.S. Yestemessova, R.E. Nurlybayev, V.P. Selyaev, I.B. Tashmukhanbetova, A.N. Alikhan, A.A. Murzagulova

    The aim of this study is to develop a technology for producing a water-dispersion thermal insulation composition based on limestone shell rock mining waste and an acrylate dispersion containing hollow microspheres, as well as to investigate the influence of filled binders on the physical, mechanical, and thermophysical properties of thermal insulation coatings incorporating limestone shell rock from the Zhetybay deposit, Karakiya District, Mangystau Region, Kazakhstan. The microstructure of shell limestone was investigated using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) with a JEOL JSM-7000F scanning electron microscope. The determination of the weight and atomic percentages of the major elements confirmed the carbonate nature of the studied raw material and its consistency with the mineral composition of shell limestone mining waste (wt.%/at.%: O – 50.25/59.34; Ca – 34.14/16.09; C – 15.61/24.56). It was established that, to obtain a water-dispersion composition with low density, it is advisable to use finely dispersed fillers in the form of powder, as well as hollow glass and aluminosilicate microspheres. The particle size of shell limestone powder was 5.67 × 10⁻⁶ m, while the contents of calcium carbonate (CaCO₃) and silica (SiO₂) were 71.0 wt.% and 22.5 wt.%, respectively. A relationship between the proportion and content of shell limestone and microspheres in the filled binder system was identified, demonstrating a significant variation in thermal conductivity within the range of 0.010–0.015 W/(m·°C), as well as changes in the density and adhesive strength of the thermal-insulating coating, reaching ρ₍dry₎ = 0.410–0.415 g/cm³ and σ₍adh₎ ≥ 2.05–2.08 MPa, respectively. The optimal composition of the water-dispersion thermal-insulating coating was determined. The content of the main components is as follows (wt.%): styrene–acrylic or acrylic dispersion, 20–25; shell limestone, 20–25; glass microspheres, 3–9; and aluminosilicate microspheres, 20–30


  • Big Data in Predicting the Climatic Resistance of Building Materials. I. Air Temperature and Humidity

    by Т.а. Низина, Д.р. Низин, В.п. Селяев, И.п. Спирин, А.с. Станкевич

    в статье проведен сравнительный анализ количественных значений температуры и относительной влажности окружающего воздуха, рассчитанных согласно ГОСТ 16350-80 для умеренно континентального климата (представительный пункт – г. Москва), и полученных на метеорологической станции НИ МГУ им. Н.П. Огарева (г. Саранск) за период с 2015 по 2022 гг. Установлено существенное расхождение расчетных и накопленных значения метеорологических факторов. На исследуемом временном отрезке разброс значений разницы между расчетными и накопленными значениями составил от -5,8 до 10 оС для температуры воздуха и от -36,4 до 32,5% для относительной влажности. Также наблюдается существенное варьирование значений разницы исследуемых показателей в зависимости от календарного месяца и отклонение ряда кривых распределения от нормального вида, что, в целом, свидетельствует о невозможности достоверной оценки распределений с помощью только значения квадратичного отклонения, рекомендуемой ГОСТ 16350-80. Установлено, что использование расчетных распределений практически не позволяет учитывать события, возникающие вблизи границ распределений исследуемых метеорологических параметров. Это, в свою очередь, необратимо сказывается на точности прогнозирования процессов климатического старения строительных материалов. При прогнозировании климатической стойкости материалов методами машинного обучения предложено использовать вместо относительной влажности значения абсолютной влажности воздуха, как признака, имеющего четкий физический смысл (масса водяных паров, содержащихся в 1 м³ воздуха), а также определенного только на интервале неотрицательных значений. Ключевые слова: большие данные, климатическая стойкость, температура воздуха, относительная влажность, абсолютная влажность, тепловая карта, умеренно континентальный климат the article provides a comparative analysis of the quantitative values of temperature and relative humidity of the ambient air calculated according to GOST 16350-80 for a moderate continental climate (representative location – Moscow), and obtained at the meteorological station of Ogarev State University (Saransk) for the period from 2015 to 2022. A significant discrepancy between the calculated and accumulated values of meteorological factors has been established. In the studied time interval, the spread of the difference between the calculated and accumulated values ranged from -5.8 to 10 oC for air temperature and from -36.4 to 32.5% for relative humidity. There is also a significant variation in the difference of the studied indicators depending on the calendar month, as well as a deviation of a number of distribution curves from the normal form, which, in general, indicates the impossibility to reliably assess distributions using only the value of the quadratic deviation recommended by GOST 16350-80. It has been established that the use of calculated distributions virtually does not allow taking into account events occurring near the boundaries of the distributions of the studied meteorological parameters. This, in turn, irreversibly affects the accuracy of forecasting the climatic aging of building materials. When predicting the climatic resistance of materials by machine learning methods, it is proposed to use absolute humidity values instead of relative humidity as a sign that has a clear physical meaning (mass of water vapor contained in 1 m3 of air), as well as defined only in the range of non-negative values.