Michael Pierro
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Michael Pierro has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Ramees K. Rahman
Center for Advanced Turbomachinery and Energy Research (CATER), University of Central Florida , Orlando, FL 32816
3 shared publications - Subith S. Vasu
University of Central Florida
3 shared publications - Ganesan Subbaraman
GTI Energy , Des Plaines, IL 60018
2 shared publications - Mark Winquist
GTI Energy , Des Plaines, IL 60018
2 shared publications - Robert Steele
Electric Power Research Institute , Charlotte, NC 28262
2 shared publications - Christopher W. Dennis
Center for Advanced Turbomachinery and Energy Research (CATER), Mechanical and Aerospace Engineering, University of Central Florida, Orlando, FL 32816
1 shared publication
Latest Publications
- 15 November 2024
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 147 (3) , 1-18
Flame Speed Measurements of Ammonia–Hydrogen Mixtures for Gas-Turbines
Ammonia (NH3) is a promising sustainable fuel, as it has historically been shown to provide high energy potential and zero carbon emission. As a hydrogen (H2) carrier, NH3 serves as a possible solution to the U.S. Department of Energy?s Hydrogen Program Plan by providing efficient H2 storage and conservation capabilities. As a result, applied turbine-combustion research of NH3 and H2 fuel has been conducted to identify combustion performance parameters that aid in the design of sustainable turbomachinery. One of these key combustion parameters is the laminar burning speed (LBS). While abundant literature exists on the combustion of NH3 and H2 fuels, there is insufficient evidence in high pressure environments to provide a comprehensive understanding of NH3 and H2 combustion phenomena in turbine combustor settings. The effect of H2 addition to NH3 fuel was observed by comparing the LBS for various NH3-H2 mixture compositions. Experimental results revealed increased LBS values for H2 enriched NH3, with the maximum LBS occurring at stoichiometry. The experimental data were accurately predicted by the UCF NH3-H2 mechanism developed for this investigation, while NUI 1.1 simulations overestimated recorded LBS data by a significant margin. This study demonstrates and quantifies the enhancing effect of H2 addition to NH3 fuels via LBS and strengthens the literature surrounding NH3-H2 combustion reactions for future work.
- 15 November 2024
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 147 (3) , 1-18
Flame Speed Measurements of Ammonia–Hydrogen Mixtures for Gas-Turbines
Ammonia (NH3) is a promising sustainable fuel, as it has historically been shown to provide high energy potential and zero carbon emission. As a hydrogen (H2) carrier, NH3 serves as a possible solution to the U.S. Department of Energy?s Hydrogen Program Plan by providing efficient H2 storage and conservation capabilities. As a result, applied turbine-combustion research of NH3 and H2 fuel has been conducted to identify combustion performance parameters that aid in the design of sustainable turbomachinery. One of these key combustion parameters is the laminar burning speed (LBS). While abundant literature exists on the combustion of NH3 and H2 fuels, there is insufficient evidence in high pressure environments to provide a comprehensive understanding of NH3 and H2 combustion phenomena in turbine combustor settings. The effect of H2 addition to NH3 fuel was observed by comparing the LBS for various NH3-H2 mixture compositions. Experimental results revealed increased LBS values for H2 enriched NH3, with the maximum LBS occurring at stoichiometry. The experimental data were accurately predicted by the UCF NH3-H2 mechanism developed for this investigation, while NUI 1.1 simulations overestimated recorded LBS data by a significant margin. This study demonstrates and quantifies the enhancing effect of H2 addition to NH3 fuels via LBS and strengthens the literature surrounding NH3-H2 combustion reactions for future work.
- 26 October 2024
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 147 (2) , 1-22
Development of Detailed and Reduced Chemical Kinetic Models for Ammonia Gas Turbines
The power generation sector has been recently moving toward decarbonization, and there is an increased interest in replacing conventional fossil fuels with fuels that produce reduced/zero carbon emissions. One such fuel is ammonia (NH3). However, ammonia is hard to ignite, has a low flame speed, and produces a significantly large amount of nitrogen oxide (NOx) emissions. Hence, using 100% ammonia as fuel in gas turbines requires significant modifications and the development of novel combustors. Blending hydrogen with ammonia, however, helps in having better control over the combustion properties. For example, a 70%/30% mixture of NH3/H2 mixture has a flame speed comparable to natural gas. Before utilizing hydrogen-blended ammonia in an actual gas turbine combustor, thorough simulation studies are required to evaluate its performance, possible hazards, and emissions. The literature lacks well-validated chemical kinetic models for the combustion of hydrogen-blended ammonia for undiluted mixtures at gas turbine-relevant conditions (∼20 bar). Most models available in the literature have been developed for ammonia extremely diluted in diluents such as argon or nitrogen. Hence, in this work, we develop a detailed chemical kinetic model for hydrogen-blended ammonia combustion and validate it with a wide range of experimental data for both dilute and undiluted mixtures relevant to gas turbine operating conditions. We outline the strengths and weaknesses of the current mechanism to aid future users of our chemical kinetic mechanism. The detailed chemical kinetic mechanism was reduced to a smaller version (32 species mechanism) without significant loss in accuracy using the directed relation graph with error propagation (DRGEP) and full species sensitivity analysis. The resultant mechanism can predict a wide range of experimental results with the least cumulative error and will be a valuable tool in computational fluid dynamics (CFD) simulations that will enable the development of gas turbines for zero-carbon power generation.
- 26 October 2024
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 147 (2) , 1-22
Development of Detailed and Reduced Chemical Kinetic Models for Ammonia Gas Turbines
The power generation sector has been recently moving toward decarbonization, and there is an increased interest in replacing conventional fossil fuels with fuels that produce reduced/zero carbon emissions. One such fuel is ammonia (NH3). However, ammonia is hard to ignite, has a low flame speed, and produces a significantly large amount of nitrogen oxide (NOx) emissions. Hence, using 100% ammonia as fuel in gas turbines requires significant modifications and the development of novel combustors. Blending hydrogen with ammonia, however, helps in having better control over the combustion properties. For example, a 70%/30% mixture of NH3/H2 mixture has a flame speed comparable to natural gas. Before utilizing hydrogen-blended ammonia in an actual gas turbine combustor, thorough simulation studies are required to evaluate its performance, possible hazards, and emissions. The literature lacks well-validated chemical kinetic models for the combustion of hydrogen-blended ammonia for undiluted mixtures at gas turbine-relevant conditions (∼20 bar). Most models available in the literature have been developed for ammonia extremely diluted in diluents such as argon or nitrogen. Hence, in this work, we develop a detailed chemical kinetic model for hydrogen-blended ammonia combustion and validate it with a wide range of experimental data for both dilute and undiluted mixtures relevant to gas turbine operating conditions. We outline the strengths and weaknesses of the current mechanism to aid future users of our chemical kinetic mechanism. The detailed chemical kinetic mechanism was reduced to a smaller version (32 species mechanism) without significant loss in accuracy using the directed relation graph with error propagation (DRGEP) and full species sensitivity analysis. The resultant mechanism can predict a wide range of experimental results with the least cumulative error and will be a valuable tool in computational fluid dynamics (CFD) simulations that will enable the development of gas turbines for zero-carbon power generation.
- 4 January 2024
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 146 (6) , 1-11
Ignition Delay Times and Chemical Kinetic Model Validation for Hydrogen and Ammonia Blending With Natural Gas at Gas Turbine Relevant Conditions
Ignition delay times from undiluted mixtures of natural gas (NG)/H2/Air and NG/NH3/Air were measured using a high-pressure shock tube at the University of Central Florida. The combustion temperatures were experimentally tested between 1000-1500 K near a constant pressure of 25 bar. As mentioned, mixtures were kept undiluted to replicate the same chemistry pathways seen in gas turbine combustion chambers. Recorded combustion pressures exceeded 200 bar due to the large energy release, hence why these were performed at the high-pressure shock tube facility. The data is compared to the predictions of the NUIGMech 1.1 mechanism for chemical kinetic model validation and refinement. An exceptional agreement was shown for stoichiometric conditions in all cases but strayed at lean and rich equivalence ratios, especially in the lower temperature regime of H2 addition and all temperature ranges of the baseline NG mixture. Hydrogen addition also decreased ignition delay times by nearly 90%, while NH3 fuel addition made no noticeable difference in ignition time. NG/NH3 exhibited similar chemistry to pure NG under the same conditions, which is shown in a sensitivity analysis. The reaction CH3 + O2 = CH3O + O is identified and suggested as a possible modification target to improve model performance. Increasing the robustness of chemical kinetic models via experimental validation will directly aid in designing next-generation combustion chambers for use in gas turbines, which in turn will greatly lower global emissions and reduce greenhouse effects.
- 4 January 2024
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 146 (6) , 1-11
Ignition Delay Times and Chemical Kinetic Model Validation for Hydrogen and Ammonia Blending With Natural Gas at Gas Turbine Relevant Conditions
Ignition delay times from undiluted mixtures of natural gas (NG)/H2/Air and NG/NH3/Air were measured using a high-pressure shock tube at the University of Central Florida. The combustion temperatures were experimentally tested between 1000-1500 K near a constant pressure of 25 bar. As mentioned, mixtures were kept undiluted to replicate the same chemistry pathways seen in gas turbine combustion chambers. Recorded combustion pressures exceeded 200 bar due to the large energy release, hence why these were performed at the high-pressure shock tube facility. The data is compared to the predictions of the NUIGMech 1.1 mechanism for chemical kinetic model validation and refinement. An exceptional agreement was shown for stoichiometric conditions in all cases but strayed at lean and rich equivalence ratios, especially in the lower temperature regime of H2 addition and all temperature ranges of the baseline NG mixture. Hydrogen addition also decreased ignition delay times by nearly 90%, while NH3 fuel addition made no noticeable difference in ignition time. NG/NH3 exhibited similar chemistry to pure NG under the same conditions, which is shown in a sensitivity analysis. The reaction CH3 + O2 = CH3O + O is identified and suggested as a possible modification target to improve model performance. Increasing the robustness of chemical kinetic models via experimental validation will directly aid in designing next-generation combustion chambers for use in gas turbines, which in turn will greatly lower global emissions and reduce greenhouse effects.