CYCansheng Yu

Cansheng Yu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Cansheng Yu has a total of 11 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Microstructural Evolution and Mechanical Properties of V-Containing Medium-Mn Steel Adopting Simple Intercritical Annealing

    by Cansheng Yu, Ning Zhao, Yu Mei, Weisen Zheng, Yanlin He, Lin Li, Guo Yuan

    The variations of the microstructure and mechanical properties of medium-Mn steel after vanadium (V) microalloying with different contents were investigated. After a one-step intercritical annealing (IA) at 730 °C, the steel containing 0.04 wt.% of V exhibited excellent comprehensive properties. The steel maintained an ultimate tensile strength (UTS) of 1000 MPa while also exhibiting a total elongation (TEL) of 37% and a product of strength and plasticity (PSE) of 37.7 GPa%. V-microalloying improved the yield strength (YS) and UTS of the experimental steel by refining ferrite grains and precipitation strengthening, however, it deteriorated its plasticity, which is difficult to compensate for through grain refinement and due to the TRIP effect of retained austenite (RA). The largest amount of RA and the appropriate stability also make a significant contribution to the outstanding UTS of the steel containing 0.04 wt.% of V through the TRIP effect. However, the further increase of V content led to decreased RA content and stability, weakening the TRIP effect and resulting in a weaker strength ductility balance.


  • Open Access

    Effects of Quenching Temperature on the Microstructure and Mechanical Properties of a Strip-Cast Medium-Mn Steel Processed by Quenching and Partitioning

    by Cansheng Yu, Hesong Wang, Yuanxiang Zhang, Yunjie Li, Jian Kang, Zhiyuan Chang

    Twin-roll strip casting (TRSC), which is a low-energy and short process to produce strip steel, is a potential approach to produce advanced high-strength steels. Herein, a medium-Mn steel containing 4 wt% Mn was processed using a novel route involving TRSC, hot rolling and quenching and partitioning (QP) to explore the possibility of medium-Mn steel produced by TRSC plus QP process. The effects of quenching temperature on the microstructure and mechanical properties were studied. It was found that primary martensite and retained austenite (RA) were obtained at the quenching temperature of 140–180 °C, while primary martensite, RA and secondary martensite were obtained when the quenching temperature was 220–300 °C. With an increase in quenching temperature from 140 to 260 and to 300 °C, the RA fraction first increased from 15.4% to 31.8% and then decreased to 16.6%. The sample at a quenching temperature of 220 °C yielded mechanical properties with a yield strength of 992 MPa, tensile strength of 1159 MPa and total elongation of 20.4%. The superior mechanical properties were achieved by an optimum combination of high RA fraction (26.5%), appropriate mechanical stability of RA and a small number of the islands of secondary martensite and RA. Hence, the present study provides a viable processing route for medium-Mn steel.