Jinghui Guo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jinghui Guo has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
Guiping Lin
16 shared publications- Xiaoyong Wang
State Key Laboratory of High Temperature Gas Dynamics, Institute of Mechanics, Chinese Academy of Sciences 1 , 100190 Beijing
5 shared publications - Qiming Zhang4 shared publications
- Sijia Li
School of Aeronautic Science and Engineering, Beihang University, Beijing 100191, China
4 shared publications Xueqin Bu
4 shared publicationsYanmeng Chao
3 shared publications
Latest Publications
- 1 August 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (8)
Tightly coupled simulation of reciprocal interactions between porous microstructure ablation and hypersonic boundary layer
Ablation of thermal protection materials under hypersonic flow generates porous microstructures that modify boundary layer characteristics, with direct implications for the multicomponent species transport and near-wall flow structure. This study employs a tightly coupled direct simulation Monte Carlo framework with a topology-aware zonal ablation method to simulate porous microstructure ablation on a 20-degree sharp wedge under atomic oxygen and air freestream conditions. Employing the tightly coupled framework, the simulated flow fields exhibit continuous profiles of velocity, temperature, and species concentrations seamlessly across the external boundary layer and porous interior, reflecting the true physical scenarios of ablation-induced mass blowing, thermodynamic non-equilibrium, and multicomponent species transport that partitioned loosely coupled approaches with the discontinuities and inherent boundary conditions cannot capture. Surface ablation is confirmed by Thiele number analysis, and spatially heterogeneous Damköhler number distributions quantify fiber-scale reaction–diffusion competition, revealing bidirectional mass transport that bridges macroscopic external flow dynamics and microscopic reactive transport within the porous network. Ablation produces pronounced streamwise gradients in flow characteristics along the cavity interior, with lower-porosity configurations sustaining more intense surface reactions and higher product gas concentrations. These findings highlight the intimate mechanism between microscale structural evolution and macroscopic boundary layer response, underscoring the need for ablation prediction methods that resolve microstructural detail and internal flow transport.
- 1 August 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (8)
Tightly coupled simulation of reciprocal interactions between porous microstructure ablation and hypersonic boundary layer
Ablation of thermal protection materials under hypersonic flow generates porous microstructures that modify boundary layer characteristics, with direct implications for the multicomponent species transport and near-wall flow structure. This study employs a tightly coupled direct simulation Monte Carlo framework with a topology-aware zonal ablation method to simulate porous microstructure ablation on a 20-degree sharp wedge under atomic oxygen and air freestream conditions. Employing the tightly coupled framework, the simulated flow fields exhibit continuous profiles of velocity, temperature, and species concentrations seamlessly across the external boundary layer and porous interior, reflecting the true physical scenarios of ablation-induced mass blowing, thermodynamic non-equilibrium, and multicomponent species transport that partitioned loosely coupled approaches with the discontinuities and inherent boundary conditions cannot capture. Surface ablation is confirmed by Thiele number analysis, and spatially heterogeneous Damköhler number distributions quantify fiber-scale reaction–diffusion competition, revealing bidirectional mass transport that bridges macroscopic external flow dynamics and microscopic reactive transport within the porous network. Ablation produces pronounced streamwise gradients in flow characteristics along the cavity interior, with lower-porosity configurations sustaining more intense surface reactions and higher product gas concentrations. These findings highlight the intimate mechanism between microscale structural evolution and macroscopic boundary layer response, underscoring the need for ablation prediction methods that resolve microstructural detail and internal flow transport.
- 22 March 2026
- Published by Elsevier in Aerospace Science and Technology
- Vol. 177
Thermochemical nonequilibrium effects on the aero-optics in high-enthalpy flow over a double wedge
- 22 March 2026
- Published by Elsevier in Aerospace Science and Technology
- Vol. 177
Thermochemical nonequilibrium effects on the aero-optics in high-enthalpy flow over a double wedge
- 1 March 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (3)
Effects of vibration–vibration–translation reactions in vibrational state-specific modeling of high-enthalpy nitrogen flow over a sphere
The large number of transitions involved in vibration–vibration–translation (VVT) transitions during molecule–molecule collisions in the state-to-state (StS) simulation significantly increases computational cost and limits the multidimensional application. Two methods, multiquantum restrictions and simplifying VVT transitions to vibration–translation (VTm) transitions, are proposed to reduce computational consumption. This study is a continuation of a previous work [Guo et al., “Investigation of high enthalpy thermochemical nonequilibrium flow over spheres,” Phys. Fluids 36, 016122 (2024)]. It aims to systematically analyze the effects of VVT and VTm transitions on the flowfield characteristics and heat flux distributions of high-enthalpy nitrogen flow over a sphere. The numerical results show that the StS VVT and VTm transitions predict nearly identical shock standoff distances and stagnation-point heat fluxes, which agree with experimental data. Incorporating VVT transitions yields minimal differences in the predictions of translational temperature, vibrational temperature, and N mass fraction compared to VTm processes. Near the wall, the VVT and VTm transitions yield almost identical state populations, with gradually pronounced non-Boltzmann distributions. Therefore, the VVT transitions can be effectively reduced to VTm transitions while maintaining essential accuracy for predicting aerodynamic heating.
- 1 March 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (3)
Effects of vibration–vibration–translation reactions in vibrational state-specific modeling of high-enthalpy nitrogen flow over a sphere
The large number of transitions involved in vibration–vibration–translation (VVT) transitions during molecule–molecule collisions in the state-to-state (StS) simulation significantly increases computational cost and limits the multidimensional application. Two methods, multiquantum restrictions and simplifying VVT transitions to vibration–translation (VTm) transitions, are proposed to reduce computational consumption. This study is a continuation of a previous work [Guo et al., “Investigation of high enthalpy thermochemical nonequilibrium flow over spheres,” Phys. Fluids 36, 016122 (2024)]. It aims to systematically analyze the effects of VVT and VTm transitions on the flowfield characteristics and heat flux distributions of high-enthalpy nitrogen flow over a sphere. The numerical results show that the StS VVT and VTm transitions predict nearly identical shock standoff distances and stagnation-point heat fluxes, which agree with experimental data. Incorporating VVT transitions yields minimal differences in the predictions of translational temperature, vibrational temperature, and N mass fraction compared to VTm processes. Near the wall, the VVT and VTm transitions yield almost identical state populations, with gradually pronounced non-Boltzmann distributions. Therefore, the VVT transitions can be effectively reduced to VTm transitions while maintaining essential accuracy for predicting aerodynamic heating.
- 1 February 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (2)
High-enthalpy unsteady pulsation flow over a double wedge
Large-scale pulsation unsteadiness is identified in the high-enthalpy shock wave-boundary-layer interaction flow over a double wedge. The objective of the study is to illustrate the transient flowfield evolution and spatiotemporal dynamics of the pulsation mode with vibrational nonequilibrium. A laminar nitrogen flow with a freestream Mach 4.11 and a total enthalpy of 3.77 MJ/kg for a 30°–55° double wedge is considered, which is a test case from the experiments in the Hypervelocity Expansion Tube. Unsteady two-dimensional Navier–Stokes equations incorporating thermochemical nonequilibrium gas model are numerically solved with a due-time stepping time marching scheme to the second-order accuracy. The simulated shock structure agrees well with the experimental Schlieren snapshots in the flow establishment course. Periodic inflation and restoration of the shock system are driven by the expansion of separation bubbles and escape of low-pressure vortices. A single main frequency is identified over the flowfield for the pressure and temperatures, indicating that the motions of the separated region, shock system, and shear layer are strongly coupled to form a synchronized pulsation mode. Finally, the variation in the non-dimensional frequency for high-enthalpy pulsation flow is illustrated based on the binary scaling law.
- 1 February 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (2)
High-enthalpy unsteady pulsation flow over a double wedge
Large-scale pulsation unsteadiness is identified in the high-enthalpy shock wave-boundary-layer interaction flow over a double wedge. The objective of the study is to illustrate the transient flowfield evolution and spatiotemporal dynamics of the pulsation mode with vibrational nonequilibrium. A laminar nitrogen flow with a freestream Mach 4.11 and a total enthalpy of 3.77 MJ/kg for a 30°–55° double wedge is considered, which is a test case from the experiments in the Hypervelocity Expansion Tube. Unsteady two-dimensional Navier–Stokes equations incorporating thermochemical nonequilibrium gas model are numerically solved with a due-time stepping time marching scheme to the second-order accuracy. The simulated shock structure agrees well with the experimental Schlieren snapshots in the flow establishment course. Periodic inflation and restoration of the shock system are driven by the expansion of separation bubbles and escape of low-pressure vortices. A single main frequency is identified over the flowfield for the pressure and temperatures, indicating that the motions of the separated region, shock system, and shear layer are strongly coupled to form a synchronized pulsation mode. Finally, the variation in the non-dimensional frequency for high-enthalpy pulsation flow is illustrated based on the binary scaling law.
- 1 January 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (1)
Permeability of porous microstructure in thermal protection system under high-temperature reactive gas conditions
The transport properties of thermal protection materials are fundamentally altered by high-temperature chemical reactions during hypersonic entry, which is crucial for accurately predicting material response and thermal protection performance. This study employs the direct simulation Monte Carlo (DSMC) method to investigate the permeability characteristics of typical thermal protection material porous microstructures under high-temperature reactive gas conditions. Using a 3D needle-punched carbon preforms as the porous microstructure sample, the influence of flow parameters (gas temperature and composition) and thermochemical effects (internal energy excitation and chemical reactions) on the material permeability is examined across three temperature levels (1000, 1600, and 2850 K) and three gas compositions (pure O2, half O2/half O, and pure O). Non-reactive mixtures exhibit linear permeability-pressure relationships which follow the Klinkenberg model. However, chemical reactions significantly induce nonlinear variations, especially at higher temperatures and O concentrations. Complex flow patterns, including non-uniform mass flux distributions and localized flow reversals, are observed in reactive cases. The results reveal that the interplay between chemical reactions, diffusion, and flow dynamics significantly influences permeability characteristics.
- 1 January 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (1)
Permeability of porous microstructure in thermal protection system under high-temperature reactive gas conditions
The transport properties of thermal protection materials are fundamentally altered by high-temperature chemical reactions during hypersonic entry, which is crucial for accurately predicting material response and thermal protection performance. This study employs the direct simulation Monte Carlo (DSMC) method to investigate the permeability characteristics of typical thermal protection material porous microstructures under high-temperature reactive gas conditions. Using a 3D needle-punched carbon preforms as the porous microstructure sample, the influence of flow parameters (gas temperature and composition) and thermochemical effects (internal energy excitation and chemical reactions) on the material permeability is examined across three temperature levels (1000, 1600, and 2850 K) and three gas compositions (pure O2, half O2/half O, and pure O). Non-reactive mixtures exhibit linear permeability-pressure relationships which follow the Klinkenberg model. However, chemical reactions significantly induce nonlinear variations, especially at higher temperatures and O concentrations. Complex flow patterns, including non-uniform mass flux distributions and localized flow reversals, are observed in reactive cases. The results reveal that the interplay between chemical reactions, diffusion, and flow dynamics significantly influences permeability characteristics.
- Open Access
- 23 July 2024
- Published by Elsevier in Case Studies in Thermal Engineering
- Vol. 61
Design and analysis of a novel thermal management system for serving next-generation aircraft with megawatt-level heat loads
- 23 July 2024
- Published by Elsevier in Case Studies in Thermal Engineering
- Vol. 61
Open AccessDesign and analysis of a novel thermal management system for serving next-generation aircraft with megawatt-level heat loads
- 1 January 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (1)
Investigation of high enthalpy thermochemical nonequilibrium flow over spheres
The hypersonic high enthalpy nitrogen flows over spheres are investigated by high-fidelity state-to-state (StS) modeling. The objective of the study is to understand the nonequilibrium behaviors in the shock layer, including the stagnation line features, surface heat transfer rate, and near-wall properties inside the thermal boundary layer. Two cases with the freestream total enthalpies of 16.5 and 15.5 MJ/kg are considered, and the numerical results are compared with the experimental data. The StS model yields an accurate prediction of the shock stand-off distance with the experiment rather than an underestimation by the traditional two-temperature model. Both the StS and two-temperature models provide general agreement of the stagnation point heat flux with the experiment. In comparison, the heat flux obtained by the StS model is lower than the two-temperature model. Note that our work finds distinctive behaviors of near-wall properties. The vibrational energy is not accommodated with the sphere surface and is in thermal nonequilibrium with the translational energy, with evidence showing that the vibrational temperature is much higher than the wall temperature and the translational temperature. The values of vibrational temperature in the immediate vicinity of the stagnation point are 9.3 and 10.0 times the wall temperature for the cases with total enthalpies of 16.5 and 15.5 MJ/kg, respectively. Moreover, the vibration temperature demonstrates a nonmonotonic variation trend with a local minimum, which can be explained by the nonequilibrium distributions of vibrational energy states due to vibrational-translational energy transfer and molecular recombination.
- 1 January 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (1)
Investigation of high enthalpy thermochemical nonequilibrium flow over spheres
The hypersonic high enthalpy nitrogen flows over spheres are investigated by high-fidelity state-to-state (StS) modeling. The objective of the study is to understand the nonequilibrium behaviors in the shock layer, including the stagnation line features, surface heat transfer rate, and near-wall properties inside the thermal boundary layer. Two cases with the freestream total enthalpies of 16.5 and 15.5 MJ/kg are considered, and the numerical results are compared with the experimental data. The StS model yields an accurate prediction of the shock stand-off distance with the experiment rather than an underestimation by the traditional two-temperature model. Both the StS and two-temperature models provide general agreement of the stagnation point heat flux with the experiment. In comparison, the heat flux obtained by the StS model is lower than the two-temperature model. Note that our work finds distinctive behaviors of near-wall properties. The vibrational energy is not accommodated with the sphere surface and is in thermal nonequilibrium with the translational energy, with evidence showing that the vibrational temperature is much higher than the wall temperature and the translational temperature. The values of vibrational temperature in the immediate vicinity of the stagnation point are 9.3 and 10.0 times the wall temperature for the cases with total enthalpies of 16.5 and 15.5 MJ/kg, respectively. Moreover, the vibration temperature demonstrates a nonmonotonic variation trend with a local minimum, which can be explained by the nonequilibrium distributions of vibrational energy states due to vibrational-translational energy transfer and molecular recombination.
- Open Access
- 1 November 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (11)
High-fidelity state-to-state modeling of hypersonic flow over a double cone
The state-of-the-art high-fidelity state-to-state (StS) model is performed to investigate the hypersonic shock wave/laminar boundary layer interaction over a 25°–55° double cone. This work aims to clarify whether the shortcomings of thermochemical models are the underlying source for the discrepancies between the simulations and experiments. A high-enthalpy nitrogen flow with a Mach number of 11.54 and a unit Reynolds number of 4.394×105/m is considered. We first find that the StS and widely used two-temperature models yield two different shock reflection patterns (i.e., the regular reflection and Mach reflection, respectively). However, the surface pressure and heat flux distributions predicted by the two models are generally consistent, which are not influenced by the differences in the shock patterns, dissociation rates, and non-Boltzmann vibrational distributions in the flowfields. Moreover, the StS model fails to match the experiments in spite of fairly limited improvement. Our findings indicate that the shortcomings of thermochemical models are not the main reason for the discrepancies in the simulations and experiments for the high-enthalpy nitrogen double-cone flow.
- 1 November 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (11)
Open AccessHigh-fidelity state-to-state modeling of hypersonic flow over a double cone
The state-of-the-art high-fidelity state-to-state (StS) model is performed to investigate the hypersonic shock wave/laminar boundary layer interaction over a 25°–55° double cone. This work aims to clarify whether the shortcomings of thermochemical models are the underlying source for the discrepancies between the simulations and experiments. A high-enthalpy nitrogen flow with a Mach number of 11.54 and a unit Reynolds number of 4.394×105/m is considered. We first find that the StS and widely used two-temperature models yield two different shock reflection patterns (i.e., the regular reflection and Mach reflection, respectively). However, the surface pressure and heat flux distributions predicted by the two models are generally consistent, which are not influenced by the differences in the shock patterns, dissociation rates, and non-Boltzmann vibrational distributions in the flowfields. Moreover, the StS model fails to match the experiments in spite of fairly limited improvement. Our findings indicate that the shortcomings of thermochemical models are not the main reason for the discrepancies in the simulations and experiments for the high-enthalpy nitrogen double-cone flow.
- Open Access
- 1 October 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (10)
Hypersonic flow and heat transfer of a micro-rough plate in the near-continuum regime
Hypersonic near-continuum flow over a flat plate with micro-scale roughness is studied using the kinetic direct simulation Monte Carlo method on roughness module configurations with different relative roughness (h) values and roughness densities (RN) under a matrix of freestream parameters (Mach number Ma∞, Reynolds number Re∞, temperature T∞, and Knudsen number Kn∞). An open-source Stochastic PArallel Rarefied-gas Time-accurate Analyzer code, which enables Cartesian grid adaption and efficient parallelization, is utilized for the rough-plate flow simulations. Flowfield analysis reveals that the local patterns inside the roughness modules evolve starting from closed (two vortices) via transitional ultimately to open (one vortex) by an increase in h, with co-existing shrinkage of high-density zones and attenuation of density peaks. The surface quantities are significantly influenced by the flowfield characteristics, and a local association between the peak heat flux and the peak pressure is identified. Non-dimensional peak heating and pressure correlation laws for the local peak heat flux and pressure coefficients in terms of two length-scale transformations are proposed, enabling the capture of local heating and pressure extrema on rough plates with varying h and RN conditions under different Ma∞, Re∞, and T∞ parameter values. The peak heat flux and pressure coefficients can be described by analogous correlating equations expressed by first-order-polynomial or power functions. An increase in the rarefaction degree (Kn∞) deviating from the near-continuum regime causes the correlation laws to fail.
- 1 October 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (10)
Open AccessHypersonic flow and heat transfer of a micro-rough plate in the near-continuum regime
Hypersonic near-continuum flow over a flat plate with micro-scale roughness is studied using the kinetic direct simulation Monte Carlo method on roughness module configurations with different relative roughness (h) values and roughness densities (RN) under a matrix of freestream parameters (Mach number Ma∞, Reynolds number Re∞, temperature T∞, and Knudsen number Kn∞). An open-source Stochastic PArallel Rarefied-gas Time-accurate Analyzer code, which enables Cartesian grid adaption and efficient parallelization, is utilized for the rough-plate flow simulations. Flowfield analysis reveals that the local patterns inside the roughness modules evolve starting from closed (two vortices) via transitional ultimately to open (one vortex) by an increase in h, with co-existing shrinkage of high-density zones and attenuation of density peaks. The surface quantities are significantly influenced by the flowfield characteristics, and a local association between the peak heat flux and the peak pressure is identified. Non-dimensional peak heating and pressure correlation laws for the local peak heat flux and pressure coefficients in terms of two length-scale transformations are proposed, enabling the capture of local heating and pressure extrema on rough plates with varying h and RN conditions under different Ma∞, Re∞, and T∞ parameter values. The peak heat flux and pressure coefficients can be described by analogous correlating equations expressed by first-order-polynomial or power functions. An increase in the rarefaction degree (Kn∞) deviating from the near-continuum regime causes the correlation laws to fail.