HZHuayang Zhu

Huayang Zhu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Huayang Zhu has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Interfacial Molecular Synergism: A New Pathway to Ultra‐Efficient Energy Storage in Bilayer Polymer Dielectrics

    by Huayang Zhu, Jianbin Tang, Hang Chen, Can Chen, Tongqing Yang

    Poly(vinylidene fluoride)‐based (PVDF‐based) ferroelectric polymers with the highest dielectric constant among known polymers represent the most promising class of dielectric materials for high energy density capacitor applications. However, their energy storage capacity has been consistently constrained by the high conduction loss and relatively low dielectric strength. Here, a novel interfacial molecular synergism strategy is proposed to enhance the energy storage performance of PVDF‐based bilayer films, resulting in remarkable improvement in the Young's modulus and discharge energy storage efficiency (η). The significant enhancement is attributed to the formation of dense interfacial molecular entanglement between rigid polymers and the PVDF‐based matrix via multi‐site molecular synergism, which effectively alleviates interfacial mismatch and reduces conduction loss. Furthermore, the high polarity and large dipole moment of the cyano groups strengthen the molecular entanglement at the interface, further restricting charge migration and capturing charge carriers to suppress charge injection. Consequently, the bilayer film exhibits concomitantly the highest discharge energy density (U d ≈ 13.87 J cm −3 ) and a prominent η (η≈ 97.2%) along with an ultrahigh breakdown field strength (E b ≈ 767.1 MV m −1 ). This work offers valuable insights into facilitating the industrial production of high‐performance polymer dielectrics.


  • Open Access

    Physics-Based Model to Represent Membrane-Electrode Assemblies of Solid-Oxide Fuel Cells Based on Gadolinium-Doped Ceria

    by Huayang Zhu, Akhil Ashar, Robert J. Kee, Robert J. Braun, Gregory S. Jackson

    This paper reports a physics-based model that predicts membrane-electrode assembly (MEA) performance of solid-oxide fuel cells (SOFCs) with Ce0.9Gd0.1O2−δ (GDC10) electrolyte membranes. The paper derives self-consistent thermodynamic and transport properties for GDC1o mobile charged defects (oxide vacancies and reduced-ceria small polarons) by fitting published measurements of oxygen non-stoichiometry and conductivity over ranges of temperature and O2 partial pressures. The button-cell model is applied to evaluate how mixed ionic-electronic conductivity influences the performance of an SOFC MEA with a GDC10 electrolyte sandwiched between a porous, composite Ni-GDC10 anode and a porous, composite cathode of Sm0.5Sr0.5CoO3−δ (i.e., SSC) and GDC10. SSC properties are also derived by fitting published conductivity and oxygen non-stoichiometry measurements. Mixed conductivity of GDC10 and competing charge transfer reactions at both electrodes reduce open circuit voltages due to leakage current and buildup of defect concentrations at electrode-electrolyte interfaces. To fit polarization data, the button-cell model includes heterogeneous reaction rates for defect incorporation on the GDC10 surface along with Butler–Volmer expressions derived for competing charge transfer reaction rates from rigorous analyses assuming rate-limiting, elementary charge transfer reactions for each electrode. The calibrated MEA model can support rigorous SOFC modeling with GDC10 electrolytes over the range of conditions within a fully operating cell.


  • Interpreting Electrochemical Impedance Spectra with Physical Models of Mixed-Conducting Protonic Ceramic Electrochemical Cells

    by Huayang Zhu, Sandrine Ricote, Peter Weddle, Gregory S. Jackson, Robert J. Kee

    As Mogensen and colleagues demonstrated effectively for YSZ-based electrochemical cells [1,2], thoughtful implementation and interpretation of electrochemical impedance spectroscopy (EIS) can evaluate performance aspects of high-temperature electrochemical materials and devices, including fuel cells and electrolyzers. Impedance spectra measurements are typically interpreted with equivalent-circuit models, using variants of resistor-capacitor-inductor networks. Indirect inferences can be drawn between equivalent-circuit elements and physical processes and properties (e.g., charge-transfer rates, porous-media transport, charge-defect mobility, etc.). In addition to and support of measurements, detailed physical models of high-temperature electrochemical materials and devices, based upon deriving and solving dynamic conservation equations of the relevant fluid, thermal, and electrochemical processes, can produce impedance spectra. Such models link critical material properties and rate parameters, which can be measured or estimated independently, to EIS and thereby assist in evaluation of design and operational alternatives of electrochemical systems. As in experiments, impedance spectra from a physical model are derived by imposing a small harmonic-current actuation and recording the harmonic response of voltage (and possibly other observables such as temperature). By repeating this over a wide range of perturbation frequencies, the complex impedance is constructed from magnitude differences and phase shifts between the actuations and responses. Deriving impedances from physical models requires that the computational algorithm represent transient responses accurately. In principle, physical models can be understood in the context of locally linearized state-space representations. The rate of change of the electrochemical state (in terms of ion and species concentrations, electrostatic potentials, temperatures, etc...) is a linearized function of the state itself and the transient “actuation” (generally a sinusoidal current). The locally linear relationships in a state-space models are represented in terms of Jacobian matrices, which can be evaluated using numerical differentiation of the physical model. Although matrix evaluation may be a difficult and tedious task for an electrochemical system, the evaluation is always possible and producing the complex electrochemical impedance spectra involves inverting the Jacobian matrix. Oftentimes, the Jacobian may be large due to discretization of the physical model and/or poorly conditioned due to a wide range of time-constants of the governing processes. Nevertheless, evaluation of the full impedance spectra is computationally very efficient and thus with the physical model derived EIS, direct relationships can be evaluated between physical properties and the impedance spectra. Calibration of model-derived impedance spectra with measured spectra provides a valuable tool for assessing otherwise difficult, if not impossible, physical parameters to isolate from experimental measurements in high-temperature electrochemical cells. This paper illustrates the power of using dynamic physical models to formulate impedance spectra as a means for interpreting high-temperature electrochemical processes measured experimentally in protonic-ceramic symmetric-cells as reported by Pers, et al. [3]. This system (Fig. 1) was chosen because the present investigators have independently developed a physical model for BCZYYb (BaCe0·7Zr0·1Y0.1Yb0.1O3−δ) and Ni-BCZY composite electrodes [4] to interpret the performance of this system. Unlike the more well understood YSZ system, the BCZYYb and Ni/BCZY electrochemical cell presents unique modeling challenges due to the multiple ion conduction in BCZYYb and BCZY – notably protons and oxide vacancies as illustrated in Figure 1. The physical model incorporating ambipolar diffusion of the multiple ions in the electrolyte and cermet electrodes has been resolved and reported by Zhu and Kee [5]. The physical model predicts accurately the experimentally measured EIS as illustrated in Figure 1 The present study utilizes these models to develop equivalent-circuit models to evaluate the measured and the physically modeled impedance of the high-temperature proton-conducting electrochemical cells based on BCZYYb electrolytes. The results show the power of models to provide new insights in understanding alternative interpretations of the EIS for these promising materials for next-generation fuel cells and electrolyzers. The physical models provide direct relationships between impedance features and physical properties that can assist quantifying equivalent-circuit elements and physical behaviors. Such quantitative insights may accelerate design and development of electrochemical material systems for fuel cell and electrolysis units. References: 1. J. Jørgensen, M Mogensen, J. Electrochem. Soc., 148:A433-A442 (2001). 2. H. Jensen, A. Hauch, P.V. Hendriksen, M. Mogensen, N. Bonanos, T. Jacobsen, J. Electrochem. Soc., 154:B1325-1330 (2007). 3. Pers, V. Mao, M. Taillades, G. Taillades, Intl. J. Hydrogen Energy, 43:2402-2409 (2018). 4. Zhu, S. Ricote, C. Duan, R.P. O’Hayre, R.J. Kee, J. Electrochem. Soc., 165:F845-F853 (2018). 5. Zhu and R.J. Kee, J. Electrochem. Soc., 164:F1400-F1411 (2017). Figure 1. Diagram of a symmetric-cell using a thin BCZYYb protonic-ceramic electrolyte membrane and relatively thick porous Ni/BCZY electrodes. Inset shows example of impedance spectra measured and modeled for such a cell. Figure 1


  • Equilibrium and transient conductivity for gadolium-doped ceria under large perturbations: II. Modeling

    by Huayang Zhu, Sandrine Ricote, W. Grover Coors, Christodoulos Chatzichristodoulou, Robert J. Kee


  • Solid Oxide Fuel Cell with Oxide Anode-Side Support

    by Manoj R. Pillai, Yi Jiang, Negar Mansourian, Ilwon Kim, David M. Bierschenk, Huayang Zhu, Robert J. Kee, Scott A. Barnett

    Solid oxide fuel cells (SOFCs) with anode-side supports, along with -stabilized (YSZ) anode, YSZ electrolyte, and LSM-YSZ cathode, were prepared. Button cells yielded a power density up to in humidified and air at . The cells showed much-improved stability against coking in methane compared with conventional Ni–YSZ anode-supported SOFCs. A detailed model was used to fit the SOFC electrical results and to show that the good stability in methane was a result of the high O-to-C ratio in the Ni-YSZ anode due to the support.