Na Chang
Research Subjects
Na Chang has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Yanxin Chen
College of Materials Science and Engineering, Xi’an University of Architecture and Technology, Xi’an, China
2 shared publications - Jiali Huang1 shared publication
Jianxiang He
Xian Univ Architecture & Technol, Coll Mat Sci & Engn, Xian 710055, Peoples R China
1 shared publicationJiaxin Liu
College of Materials Science and Engineering, Xi’an University of Architecture and Technology, Xi’an 710055, China
1 shared publicationJinyi Liu
College of Materials Science and Engineering, Xi’an University of Architecture and Technology, Xi’an 710055, China
1 shared publicationPengfei Jiao
Xian Univ Architecture & Technol, Coll Mat Sci & Engn, Xian 710055, Peoples R China
1 shared publication
Latest Publications
- Open Access
- 1 January 2025
- Published by Wiley in International Journal of Energy Research
- Vol. 2025 (1)
Preparation of Semi‐Coke‐Based Porous Graphitic Carbon–Iron Oxide Composites and Their Electrochemical Performance for Rhodamine B Degradation
In response to the demand for clean production and high value‐added utilization of waste semi‐coke (SC) powder, SC‐based porous graphitic carbon–iron oxide (SPC‐Fe) composites were synthesized using a one‐step method with K 2 FeO 4 . The synthesis process primarily depends on the mass ratio of SC to K 2 FeO 4 and the calcination temperature. Under optimal conditions, specifically at a mass ratio of 1:2 (SC/K 2 FeO 4 ) and a calcination temperature of 800°C, SPC‐Fe exhibits a specific surface area of 443.664 m 2 /g, a total pore volume of 0.283 cm 3 /g, and a micropore volume of 0.102 cm 3 /g. It demonstrates excellent double‐layer capacitance performance and outstanding fast charging and discharging capabilities. Moreover, SPC‐Fe functions effectively as a particle electrode and a catalyst for removing Rhodamine B (RhB) from wastewater. This process involves a three‐dimensional electrochemical‐Fenton mechanism, where the high catalytic activity for RhB removal is primarily attributed to the generation of hydroxyl radicals in the system. Experimental results indicate that the RhB removal is more effective in acidic conditions, achieving a removal rate of 96.69% at pH = 2 within 15 min. This study highlights a promising approach for producing high‐performance, cost‐effective carbon compounds from waste SC powder for electrochemical applications.
- 1 January 2025
- Published by Wiley in International Journal of Energy Research
- Vol. 2025 (1)
Open AccessPreparation of Semi‐Coke‐Based Porous Graphitic Carbon–Iron Oxide Composites and Their Electrochemical Performance for Rhodamine B Degradation
In response to the demand for clean production and high value‐added utilization of waste semi‐coke (SC) powder, SC‐based porous graphitic carbon–iron oxide (SPC‐Fe) composites were synthesized using a one‐step method with K 2 FeO 4 . The synthesis process primarily depends on the mass ratio of SC to K 2 FeO 4 and the calcination temperature. Under optimal conditions, specifically at a mass ratio of 1:2 (SC/K 2 FeO 4 ) and a calcination temperature of 800°C, SPC‐Fe exhibits a specific surface area of 443.664 m 2 /g, a total pore volume of 0.283 cm 3 /g, and a micropore volume of 0.102 cm 3 /g. It demonstrates excellent double‐layer capacitance performance and outstanding fast charging and discharging capabilities. Moreover, SPC‐Fe functions effectively as a particle electrode and a catalyst for removing Rhodamine B (RhB) from wastewater. This process involves a three‐dimensional electrochemical‐Fenton mechanism, where the high catalytic activity for RhB removal is primarily attributed to the generation of hydroxyl radicals in the system. Experimental results indicate that the RhB removal is more effective in acidic conditions, achieving a removal rate of 96.69% at pH = 2 within 15 min. This study highlights a promising approach for producing high‐performance, cost‐effective carbon compounds from waste SC powder for electrochemical applications.
- Open Access
- 1 December 2024
- Published by IOP Publishing in Materials Research Express
- Vol. 11 (12) , 125503
Preparation of carbon quantum dots/fly ash/steel slag particle electrodes and their performance in rhodamine B removal
Fly ash and steel slag are industrial wastes, and their resourceful treatment has been challenging. This study generated fly ash/steel slag particle electrodes (FA/SS PEs) using fly ash and steel slag as raw materials. Carbon quantum dots (CQDs) fabricated from semi-coke were then loaded onto their surface to produce CQDs/FA/SS PEs. The samples were characterized by SEM, nitrogen adsorption, XRD, and electrochemical measurements. The results show that FA/SS PEs present a favorable electrocatalytic performance for rhodamine B (RhB) in the three-dimensional reaction system owing to their rich pore structures and an active component (Fe2O3), the other metal oxides in FA and SS become the backbone of FA/SS PEs during the preparation process. CQDs could promote the electrocatalytic performance of the FA/SS PEs due to their defect-rich surface and high specific surface area. The RhB degradation rate over CQDs/FA/SS PEs increased by approximately 10% compared to that over FA/SS PEs at a reaction time of 60 min, and it could reach 100% at pH 2 and a reaction time of 45 min over CQDs/FA/SS PEs. The RhB degradation process mainly involves a three-dimensional electrochemical-Fenton process over CQDs/FA/SS PEs, and CQDs/FA/SS PEs act as both the particle electrode of the three-dimensional reaction system and the catalyst for Fenton oxidation.
- 1 December 2024
- Published by IOP Publishing in Materials Research Express
- Vol. 11 (12) , 125503
Open AccessPreparation of carbon quantum dots/fly ash/steel slag particle electrodes and their performance in rhodamine B removal
Fly ash and steel slag are industrial wastes, and their resourceful treatment has been challenging. This study generated fly ash/steel slag particle electrodes (FA/SS PEs) using fly ash and steel slag as raw materials. Carbon quantum dots (CQDs) fabricated from semi-coke were then loaded onto their surface to produce CQDs/FA/SS PEs. The samples were characterized by SEM, nitrogen adsorption, XRD, and electrochemical measurements. The results show that FA/SS PEs present a favorable electrocatalytic performance for rhodamine B (RhB) in the three-dimensional reaction system owing to their rich pore structures and an active component (Fe2O3), the other metal oxides in FA and SS become the backbone of FA/SS PEs during the preparation process. CQDs could promote the electrocatalytic performance of the FA/SS PEs due to their defect-rich surface and high specific surface area. The RhB degradation rate over CQDs/FA/SS PEs increased by approximately 10% compared to that over FA/SS PEs at a reaction time of 60 min, and it could reach 100% at pH 2 and a reaction time of 45 min over CQDs/FA/SS PEs. The RhB degradation process mainly involves a three-dimensional electrochemical-Fenton process over CQDs/FA/SS PEs, and CQDs/FA/SS PEs act as both the particle electrode of the three-dimensional reaction system and the catalyst for Fenton oxidation.
- 16 October 2023
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 62 (43) , 17428-17439
Constructing Quantum Dots/Nano TiO2/ASC Composites as Tiny Electrodes with Efficient Electrocatalytic Property of Rhodamine B
- 16 October 2023
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 62 (43) , 17428-17439
Constructing Quantum Dots/Nano TiO2/ASC Composites as Tiny Electrodes with Efficient Electrocatalytic Property of Rhodamine B