Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yanxin Chen has a total of 42 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Ball Milling–Alkali Synergy: Mechanochemical Degradation of Phenolic Resin and Its Impact on the Performance Evolution of Rock Wool-Based Alkali-Activated Cementitious Composites

    by Xu Gao, Xiaomin Zhang, Chang Chen, Xuan Liu, Jiaqi Zhu, Shaowu Jiu, Qiang Song, Yanxin Chen

    Rock wool trim waste (RWTW) presents considerable recycling difficulties due to the release of toxic volatiles from phenolic resin binders during pyrolysis, which also hinders its effective utilization in rock wool-based alkali-activated cementitious composites (RWACCs). Traditional thermal and chemical resin removal approaches are energy-consuming, produce secondary pollutants, and can diminish the aluminosilicate reactivity of RWTW. This study introduces an innovative mechanochemical ball milling pretreatment aimed at selectively breaking resin C−O bonds while maintaining the integrity of the mineral phase, thus facilitating eco-friendly and efficient RWTW recycling. By applying different milling durations (30–120 min), the properties of RWTW particles were systematically characterized through granulometry, XRD, SEM, and FT-IR. The hydration kinetics, compressive strength, and microstructure of RWACC pastes were thoroughly examined. Key findings confirm that 120 min is the optimum ball milling duration, as validated by weighted sum analysis. This duration yielded a median particle size (D50) of 7.15 μm, significantly increased reactivity (evidenced by a 28-day activity index of 85.3%), and outstanding mechanical properties, achieving flexural and compressive strengths of 15.73 MPa and 97.27 MPa, respectively. The mechanochemical process successfully encapsulated organic residues within the geopolymer matrix, preventing toxic emissions. This synergistic approach between resin degradation and enhanced reactivity demonstrates a viable route for the industrial-scale valorization of RWTW. It significantly contributes to the circular economy objectives in the construction sector.


  • Open Access

    Synergistic Effects of Hollow Glass Microspheres and Sisal Fibers in Natural Gypsum-Based Composites: Achieving Lightweight, High-Strength, and Aesthetically Superior Construction Materials

    by Chang Chen, Yuan Gao, Shaowu Jiu, Yanxin Chen, Yan Liu

    This study explores the synergistic development of natural gypsum-based composites (NGBCs) with enhanced multifunctional characteristics, employing hollow glass microspheres (HGMs) as density-reducing agents and sisal fibers (SFs) as mechanical reinforcement phases while maintaining superior whiteness properties. Five HGM variants with precisely graded particle sizes (20, 40, 60, 80, and 100 μm) were systematically incorporated into the composite matrix. Sisal fibers with controlled length parameters (10–15 mm) were uniformly dispersed within the gypsum matrix. The multifunctional effects of these additives were comprehensively assessed via integrated mechanical characterization, spectrophotometric whiteness evaluation, and microstructural interrogation. The findings revealed that the incorporation of HGMs resulted in a significant decrease in the NGBC density while concurrently enhancing whiteness; they also exerted an adverse impact on both processability and mechanical properties. Moreover, the fusion of HGMs and SFs within the NGBCs achieved an optimal balance between lightness and strength. The peak density of NGBCs was ascertained to be 1.41 g/cm3, complemented by flexural and compressive strengths of 6.12 and 9.78 MPa, respectively. Such optimizations were realized with HGMs at a particle size of 80 um and a composition of 20 vol.%, alongside sisal fibers present at a concentration of 0.3 vol.%. The current research affords significant revelations regarding the fabrication of architectural gypsum materials that are lightweight, possess high tensile strength, exhibit an aesthetically appealing finish, and demonstrate superior whiteness, presenting a prospective resolution for applications within the high-performance construction sector.

  • Open Access

    Preparation of Semi‐Coke‐Based Porous Graphitic Carbon–Iron Oxide Composites and Their Electrochemical Performance for Rhodamine B Degradation

    by Na Chang, Jiali Huang, Yixing Shi, Pengfei Jiao, Yongsheng Li, Xinzhu Dong, Yanxin Chen

    In response to the demand for clean production and high value‐added utilization of waste semi‐coke (SC) powder, SC‐based porous graphitic carbon–iron oxide (SPC‐Fe) composites were synthesized using a one‐step method with K 2 FeO 4 . The synthesis process primarily depends on the mass ratio of SC to K 2 FeO 4 and the calcination temperature. Under optimal conditions, specifically at a mass ratio of 1:2 (SC/K 2 FeO 4 ) and a calcination temperature of 800°C, SPC‐Fe exhibits a specific surface area of 443.664 m 2 /g, a total pore volume of 0.283 cm 3 /g, and a micropore volume of 0.102 cm 3 /g. It demonstrates excellent double‐layer capacitance performance and outstanding fast charging and discharging capabilities. Moreover, SPC‐Fe functions effectively as a particle electrode and a catalyst for removing Rhodamine B (RhB) from wastewater. This process involves a three‐dimensional electrochemical‐Fenton mechanism, where the high catalytic activity for RhB removal is primarily attributed to the generation of hydroxyl radicals in the system. Experimental results indicate that the RhB removal is more effective in acidic conditions, achieving a removal rate of 96.69% at pH = 2 within 15 min. This study highlights a promising approach for producing high‐performance, cost‐effective carbon compounds from waste SC powder for electrochemical applications.

  • Open Access

    Preparation of carbon quantum dots/fly ash/steel slag particle electrodes and their performance in rhodamine B removal

    by Na Chang, Yongsheng Li, Jianxiang He, Pengfei Jiao, Yanxin Chen

    Fly ash and steel slag are industrial wastes, and their resourceful treatment has been challenging. This study generated fly ash/steel slag particle electrodes (FA/SS PEs) using fly ash and steel slag as raw materials. Carbon quantum dots (CQDs) fabricated from semi-coke were then loaded onto their surface to produce CQDs/FA/SS PEs. The samples were characterized by SEM, nitrogen adsorption, XRD, and electrochemical measurements. The results show that FA/SS PEs present a favorable electrocatalytic performance for rhodamine B (RhB) in the three-dimensional reaction system owing to their rich pore structures and an active component (Fe2O3), the other metal oxides in FA and SS become the backbone of FA/SS PEs during the preparation process. CQDs could promote the electrocatalytic performance of the FA/SS PEs due to their defect-rich surface and high specific surface area. The RhB degradation rate over CQDs/FA/SS PEs increased by approximately 10% compared to that over FA/SS PEs at a reaction time of 60 min, and it could reach 100% at pH 2 and a reaction time of 45 min over CQDs/FA/SS PEs. The RhB degradation process mainly involves a three-dimensional electrochemical-Fenton process over CQDs/FA/SS PEs, and CQDs/FA/SS PEs act as both the particle electrode of the three-dimensional reaction system and the catalyst for Fenton oxidation.


  • Open Access

    Characteristics of Solid Mineral Phase Transitions During Sulfuric Acid Production from Gaseous-Sulphur-Reduced Gypsum

    by Tianqi Wen, Yanxin Chen, Bo Zhao

    The acid co-production of cement is a prominent research focus for the large-scale, high-value utilization of phosphogypsum in the context of dual-carbon strategies. This paper builds on extensive research conducted by its authors on the co-production of sulphoaluminate cement clinker through acid production from gaseous-sulphur-reduced phosphogypsum. The solid mineral phase transformations occurring in the kiln during this process are systematically studied, and the effects of various calcination regimes (temperature, time, and atmosphere) on the evolution of clinker mineral phases are elucidated. This paper provides basic data support for the gas-sulfur-reduced phosphogypsum-acid cogeneration of sulfoaluminate cement clinker processes, and promotes the realization of the large-scale high-value utilization of phosphogypsum resources. The generation of the clinker mineral phase anhydrous calcium sulphoaluminate (C4A3S̅) begins at 1100 °C. Increasing the calcination temperature and extending the calcination time promote C4A3S̅ formation. However, when the calcination temperature exceeds 1350 °C, C4A3S̅ decomposes, leading to the formation of low-activity C2AS. In a CO atmosphere, the main mineral phases in the clinker transform into C2AS and 12CaO·7Al2O3, owing to the decomposition of CaSO4, which inhibits C4A3S̅ formation. At calcination temperatures exceeding 1300 °C, a significant amount of C2AS appears in the calcined material, and 12CaO·7Al2O3 begins to form.


  • Synthesis of 3D hierarchical flower-like calcium sulfate microspheres for cadmium removal from wastewater

    by Hengdiao Xu, Hengdiao Xu, Chang Chen, Chang Chen, Yanxin Chen, Yanxin Chen, Shaowu Jiu, Shaowu Jiu, Yan Liu, Yan Liu


  • Open Access

    Effect of Mineral Admixtures on Physical, Mechanical, and Microstructural Properties of Flue Gas Desulfurization Gypsum-Based Self-Leveling Mortar

    by Shiyu Wang, Yanxin Chen, Wei Zhao, Chang Chen

    The production of flue gas desulfurization gypsum poses a serious threat to the environment. Thus, utilizing gypsum-based self-leveling mortar (GSLM) stands out as a promising and effective approach to address the issue. β-hemihydrate gypsum, cement, polycarboxylate superplasticizer, hydroxypropyl methyl cellulose ether (HPMC), retarder, and defoamer were used to prepare GSLM. The impact of mineral admixtures (steel slag (SS), silica fume (SF), and fly ash (FA)) on the physical, mechanical, and microstructural properties of GSLM was examined through hydration heat, X-ray diffractometry (XRD), Raman spectroscopy, and scanning electron microscopy (SEM) analyses. The GSLM benchmark mix ratio was determined as follows: 94% of desulfurization building gypsum, 6% of cement, 0.638% each of water reducer and retarder, 0.085% each of HPMC and defoamer (calculated additive ratio relative to gypsum), and 0.54 water-to-cement ratio. Although the initial fluidity decreased in the GSLM slurry with silica fume, there was minimal change in 30 min fluidity. Notably, at an SS content of 16%, the GSLM exhibited optimal flexural strength (6.6 MPa) and compressive strength (20.4 MPa). Hydration heat, XRD, and Raman analyses revealed that a small portion of SS actively participated in the hydration reaction, while the remaining SS served as a filler.


  • Open Access

    H2 Reduction of Na2SO4 to Na2S Based on Dilute-Phase Fluidization

    by Fang He, Yanxin Chen, Bo Zhao, Chang Chen, Song Huang, Shoubin Peng

    Sodium sulfate (Na2SO4) is used in the ecofriendly production of sodium sulfide (Na2S) through H2 reduction, thereby facilitating the valorization of Na2SO4. However, studies on this technique remain at the laboratory stage. This paper proposes a novel process involving the external circulation of Na2S in a dilute-phase fluidized system to address the low-temperature eutectic formation between Na2S and Na2SO4 during the H2 reduction of Na2SO4 to Na2S. The process aims to increase the reaction temperature of the Na2SO4 while reducing the volume of the liquid phase formed to prevent sintering blockages and enhance the reduction rate. In a proprietary experimental setup, the H2 reduction process in a dilute-phase fluidized system was investigated. The Na2S/Na2SO4 ratio and reaction temperature were determined to be critical factors influencing the Na2SO4 reduction rate. The melting point of the system increased and the amount of liquid phase produced decreased as the Na2S content was increased to more than 60%. The Na2S–Na2SO4 mixture (mass ratio of 80:20) existed as a solid at the reaction temperature of 740 °C. After roasting for 10 s, the Na2SO4 reduction rate reached 93.7% and the Na2S content in the mixture increased to 98.74%.